《計算機網絡實驗》實驗報告-軟件實驗1

浙江大學城市學院實驗報告課程名稱 計算機網絡實驗 實驗項目名稱 軟件實驗一：網絡基本命令（一） 學生姓名 俞嘉輝 專業班級 計算1002 學號 31001148 實驗成績 指導老師（簽名 ） 日期 10.14 一. 實驗?zāi)康暮鸵?. 熟悉Windows平臺下常用網絡命令的使用：arp, ftp, ipconfig, nbtstat, net2. 操作環境：硬件：PC機；軟件：Windows 2000/XP操作系統二. 實驗內容、原理及實驗結果與分析1. 在系統DOS命令提示符下運行arp命令（-a -s d等參數）1.1 要求顯示當前主機的所有ARP信息【命令】arp -a【實驗結果與分析】1.2 要求顯示某指定主機的ARP信息【命令】arp -a 10.66.25.168【實驗結果與分析】1.3 靜態添加某指定主機IP對應的物理地址【命令】arp -s 157.55.85.212 00-aa-00-62-c6-09【實驗結果與分析】1.4 刪除剛添加的指定主機的ARP信息【命令】arp -d 157.55.85.212 【實驗結果與分析】2. 在系統DOS命令提示符下運行ftp命令（cd dir get等命令）2.1 連接到某FTP站點（如：；或：10.66.27.119、端口2021）【命令】ftp ftp open 10.66.27.119 2021【實驗結果與分析】2.2 匿名登錄FTP站點，下載某一文件【命令】【實驗結果與分析】2.3 嘗試其他相關FTP命令【命令】ftp dirftp lcd d:31001148【實驗結果與分析】3. 在系統DOS命令提示符下運行ipconfig命令（/all /displaydns等參數）3.1 獲取本地基本TCP/IP配置值【命令】【實驗結果與分析】3.2 獲取本地詳細TCP/IP配置值（包括物理地址等信息）【命令】【實驗結果與分析】4. 在系統DOS命令提示符下運行nbtstat命令（-a -n等參數）4.1 列出某一特定主機的NETBIOS信息（指出物理地址）【命令】【實驗結果與分析】4.2 列出本地主機的NETBIOS信息【命令】【實驗結果與分析】5. 在系統DOS命令提示符下運行net命令（share start use等命令）5.1 使用net share命令查看網絡共享信息【命令】【實驗結果與分析】5.2 使用net start/stop啟動/停止某一服務【命令】【實驗結果與分析】5.3 使用net send 向某一主機發送消息【命令】【實驗結果與分析】5.4 使用net use命令將遠程某一主機共享資源映射到本地【命令】【實驗結果與分析】三. 討論、心得記錄實驗感受、上機過程中遇到的困難及解決辦法、遺留的問題、意見和建議等。to achieve high quality project. 5. instrument installation construction alternatives 5.1 5.1.1 the instrument construction methods General requirements 5.1.1.1 to ensure smooth instrument construction, instrument technician prior to construction workers, have a thorough check, calculate construction materials and technology to give the low-down the construction workers. 5.1.1.2 closely linked to pipeline construction of the instrument unit, with the active cooperation, so as to avoid the instrument device is not properly installed and rework and, if necessary, corresponding with the related technical or construction plan key single equipment prior to commissioning, shall report the test application by party representatives, representatives of the management company and the factory specialists is confirmed, in order to perform. 5.1.1.3 strictly quality inspection system, each process was finished, filled in by the workers, technicians and construction quality inspection requests, advance written notice to the management company site engineer and QC personnel, make conclusions on construction quality in the future, quality form a basis of the project when completed. 5.1.1.4 strictly professional transfer of process quality inspection system, handling written delivery list. The transfer of professional process, must be fully installed quality inspection processes installed on disqualification, shall not be carried out the next working procedure operation; important instrumentation engineering processes must inform the management company engineers check and a written record. 5.1.1.5 strictly abide by the national regulation and construction site safety regulations to ensure