喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有，，圖紙均為高清圖，，CAD圖紙可自行編輯，，有疑問咨詢QQ:1064457796
營養快線瓶蓋注塑成型及模具設計
摘 要：本設計題目為營養快線瓶蓋注塑模設計，體現了深薄壁類塑料零件的設計要求、內容及方向，有一定的設計意義。通過對該零件模具的設計，進一步加強了設計者注塑模設計的基礎知識，為設計更復雜的注塑模具做好了鋪墊和吸取了更深刻的經驗。
本設計運用塑料成型工藝及模具設計的基礎知識，首先分析了塑件的成分及性能要求，為選取澆口的類型做好了準備；然后估算了塑件的體積，便于選取注塑機及確定型腔數量；最后分析了塑件的特征，確定模具的設計參數、設計要點及推出裝置的選取。
本設計分析了營養快線瓶蓋的成型特點。螺紋部分是是成型的關鍵環節。介紹了模具的分型機構和脫模方式，采用齒輪型芯，用齒輪傳動來帶動齒輪型芯轉動實現脫模。通過螺紋傳動來脫模，同時也解決了一模多腔的難點。簡化了模具結構，具有一定的推廣價值。
關鍵詞：注射模 齒輪型芯 齒輪傳動分型機構
Nutrition Express closure injection mold design
Abstract: This design titled Nutrition Express closure injection mold design , reflects the design requirements of deep thin wall plastic parts , content and direction , there is a certain sense of design . By the design of the mold parts to further strengthen the fundamentals of the design of injection mold designers for designing more complex injection molds and prepared the way and learned a more profound experience.
The use of design basics plastic molding process and mold design , analyzes the composition and performance requirements for plastic parts , for the selected type of gate ready ; then estimate the volume of plastic parts , easy to select and determine the type of injection molding machine the number of cavities ; finally analyzes the characteristics of plastic parts , mold design parameters to determine , design elements and launch the selected device .
The design and analysis of the nutritional characteristics of the fast lane cap molding . Is a key part of the threaded portion is formed . Describes the parting institutions and stripping mode, using gear core , with gear drive gear to rotate the core to achieve release . Threaded drive to stripping, but also solve the difficulty of a multi-cavity mold . Simplifying the mold structure, with certain promotional value.
Key Words： injection mold , gear cores , gear type mechanism