螺母加工工藝及夾具設計【全套設計含CAD圖紙】

螺母加工工藝及夾具設計【全套設計含CAD圖紙】,全套設計含CAD圖紙,螺母,加工,工藝,夾具,設計,全套,cad,圖紙 畢業設計（論文）中文摘要 本設計是基于螺母零件的加工工藝規程及一些工序的專用夾具設計。螺母零件的主要加工表面是外圓及孔系。一般來說，保證平面的加工精度要比保證孔系的加工精度容易。因此，本設計遵循先面后槽的原則。并將孔與平面的加工明確劃分成粗加工和精加工階段以保證孔系加工精度。主要加工工序安排是先以支承孔系定位加工出頂平面，在后續工序中除個別工序外均用頂平面和工藝孔定位加工其他孔系與平面。夾具選用專用夾具，夾緊方式多選用手動夾緊，夾緊可靠，機構可以不必自鎖。因此生產效率較高。適用于大批量、流水線上加工。能夠滿足設計要求。 關鍵詞：螺母類零件；工藝；夾具 畢業設計（論文）外文摘要 Title： The long shaft fork processing technology and fixture design Abstract： This design is the special fixture for machining process for long shaft parts and process design based on. The main processing surface of long shaft parts is cylindrical and holes. In general, ensure the machining accuracy of plane than to ensure the accuracy of the processing easily. Therefore, follow the groove surface after the first principle of the design. And the hole and the plane processing clearly divided into roughing and finishing stages to ensure machining precision. The main process of machining technology is first to support hole positioning processing the top plane, in addition to the follow-up processes are individual processes with the top plane positioning technology and other processing Kong and plane. The special fixture fixture, clamping means more choice of manual clamping, clamping reliable, agencies can not self-locking. Therefore, higher production efficiency. Suitable for large batch, the processing pipeline. Can meet the design requirements. Keywords：long shaft, processing, special fixture, design I 目 錄 1 加工工藝規程設計 3 1.1 零件的分析 3 1.1.1 零件的作用 3 1.1.2 零件的工藝分析 3 1.2 螺母加工的主要問題和工藝過程設計所應采取的相應措施 3 1.3 螺母加工定位基準的選擇 4 1.3.1 粗基準的選擇 4 1.3.2 精基準的選擇 4 1.4 螺母加工主要工序安排 4 1.5 機械加工余量、工序尺寸及毛坯尺寸的確定 6 1.6選擇加工設備及刀、量具 6 1.7確定切削用量及基本工時（機動時間） 7 1.8 時間定額計算及生產安排 11 2 銑槽夾具設計 13 2.1 工序尺寸精度分析 13 2.2 定位方案確定 13 2.3 切削力及夾緊力的計算 13 2.5 定位誤差分析計算 16 2.6 夾具設計及操作的簡要說明 16 結 論 17 參考文獻 18 致　謝 20 2 43