喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改=====================喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改=====================喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改=====================
第 4 頁
摘 要
本課題的研究?jī)?nèi)容是給煤機的總體設計。
本論文論述的給煤機是礦山機械的一個部分。給煤機工作的好壞，取決于給煤機的型號，結構和相關參數。首先，通過計算機軟件Visual Basic來進行模擬曲柄滑塊機構的運動設計編程來確定的給煤最大速度和加速度；其次，以力學模型為依據，分析了減速器的軸、齒輪,托輥上載荷的作用機理，得到了較為合理的給煤機載荷的計算公式；再次，結合本次設計的給煤機，從平面和空間兩方面對減速器的軸、齒輪；托輥等主要結構件進行受力分析；最后對減速器的軸、齒輪；托輥等主要結構件進行強度效核，并畫出它們的機械工程圖，
在完成本設計的過程中，利用理論分析的同時，也采用了許多實際經驗，做到理論與實踐相結合。
關鍵詞：給料機；減速器；曲柄滑塊機構；力學特征；強度
ABSTRACT
The paper mainly foused on the problem which is design out a type of solution.
The solution described is a part of the mining industry equipment in the mine, used for solution of working environment in the locale. It works well or bad at work basing on its solution mode, frame and some parameters. In the first step, the most pace value and acceleration value of some parameters of the Slider-crank Mechanism are determined by using Visual Basic; Secondly, Then on the base of d model of work-surrounding, the load in is decided. The clear in reason expressions of account of solution loading; The next work, with the condition of the design, it is analyzed and calculated by plane and spatial model to the main mechanics of the shaft and gear of the reducer, idler and so on. Finally, it is analyzed by calculation to the main mechanics of the shaft and gear of the reducer, idler and so on. And draw out all the process drawings.
During the course of doing the paper, author not only analyses something theoretical, but also adopted a lot of actual experiences. Combining theory and practice. Therefore, the paper possesses theory and practical value, so it measures up the requiring of the nation to the undergraduate.
Key words: solution; reducer; Slider-crank Mechanism; mechanics characteristics; strength
目 錄
摘 要 1
ABSTRACT 2
1、往復式給料機的概述 4
1.1 K型往復式給煤機的用途 5
1.2 K型往復式給煤機的組成 5
1.3 K-4型往復式給煤機的技術參數 5
2、往復式給料機的結構設計 8
2.1給煤機的大小 8
2.2能量耗損的分析 10
３、減速器的設計 13
3.1電動機的選型 13
3.2傳動比的分配 15
3.3計算傳動裝置的運動和動力參數 15
3.4齒輪的設計 16
3.5傳動軸的設計 29
3.5.4鍵的強度校核 45
3.5.5 軸承的校核 46
3.6減速器箱體的結構設計 50
3.7軸承蓋選用螺釘聯接式軸承蓋 52
3.9封油墊材料 57
4、給煤機的零件設計 58
4.1滾輪軸的設計 58
4.2曲柄的設計 61
4.3連桿的設計 61
4.4給煤槽的設計 62
4.5閘門的設計 63
5、主要零件的加工工藝 64
5.1齒輪的加工工藝 64
5.2軸的加工工藝 68
6往復式給煤機的使用、安裝、維護、發展趨勢 72
6.1往復式給煤機使用中存在的問題 72
6.2往復式給煤機的改進 72
6.3往復式給煤機的安裝 73
6.4往復式給煤機的維護 73
6.5往復式給煤機的發展趨勢 76
結 論 77
參考文獻 85
[1] 徐顴.機械設計手冊.北京:機械工業出版社，2001 85
致 謝 86
1、往復式給料機的概述
往復式給煤機在我國煤礦、選煤廠及其它行業應用已有幾十年。生產實踐證明,該設備對煤的品種、粒度、外在水份等適應能力強,與其他給料設備相比,具有運行可靠、性能穩定、噪音低、完全可靠、維護工作量小等
優點,仍有推廣使用價值。往復式給煤機的主要缺點是能耗較高。