喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，==================================
【QQ：3278627871 可咨詢交流】
喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，==================================
【QQ：3278627871 可咨詢交流】
喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，==================================
【QQ：3278627871 可咨詢交流】
中國礦業大學2007屆本科生畢業設計 第 II頁
摘要
掩護式支架作為上世紀70年代初剛出現的產品，其顯著特征是在頂梁末端和底座之間附加有掩護梁。掩護梁一般是傾斜的，鉸接在頂梁和底座之間。從運動學講，它是穩定的，這是掩護式支架最優于框式支架和垛式支架的一點，掩護梁也完全封閉了采空區，從而能夠防止破碎頂板巖石掉入支撐工作面。因此，一般來說，掩護式支架的支撐工作面是較清潔的。
本文主要介紹了：液壓支架的發展歷程及發展趨勢；液壓支架的組成、作用和分類；液壓支架的液壓控制系統；液壓支架設計的一般步驟；液壓支架的操縱、維護、故障分析及處理等。在ZY8600型液壓支架的設計過程中，著重對頂梁、底座和立柱進行了分析和設計，同時對液壓支架的液壓系統進行了介紹。根據其常見失效形式、影響因素及基本設計要求，給出了重要結構件的受力分析、強度和剛度的設計方法。在該支架的四連桿機構設計中，采用了計算機求解。對立柱和平衡千斤頂進行了強度和穩定性效核。
關鍵詞：液壓支架、ZY8600、掩護式、結構設計、采煤機械
ABSTRACT
Stand cover of the last century as the early 1970s emerging products, the notable features of the top beam between the terminal and the base of attaching a shield. Cover is generally inclined beams, the hinged roof beams and between the base. Kinematics from the speakers, it is stable, which is the optimal shield in the box-stent and the stent Crib 1:00, Leung also cover is closed goaf, so as to prevent the rock into the broken roof support Face. Therefore, in general, cover Stand Face the support of the cleaner.
This paper describes : hydraulic supports the development process and development trends; Hydraulic support the composition, role and classification; hydraulic supports the hydraulic control system; hydraulic supports the general design steps; hydraulic supports manipulation, maintenance, Fault analysis and processing. In ZY8600-hydraulic support the design process, focusing on the top beam and column base and the analysis and design Meanwhile hydraulic supports the right hydraulic system was introduced. According to their common failure mode, influencing factors and basic design requirements, is an important structure the force. Strength and stiffness of the design method. The stent in the four-bar linkage design, using a computer to solve. Column right balance between Jack and the strength and stability of nuclear efficiency.
Keywords : hydraulic support, ZY8600, shield, structural design, mechanical mining