喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:1064457796 或 1304139763】
無錫職業技術學院畢業設計說明書
摘 要
通過在壓縮機廠家的學習和網上資料結合，本次設計將簡單介紹空氣壓縮機吸氣、排氣過程的工作原理和有效減小噪音的方法。
吸氣、排氣過程是在壓縮缸里完成的。影響其吸氣或排氣量的因素有轉子直徑、轉子長度；P(壓力)、T（溫度）、海拔高度、n（轉速）、V（余隙容積）、泄漏等。前者屬于設計因素，而后者屬于運動因素。合理的運用這些因素可以有效的提高壓縮機的工作效率，從而提高生產率。
噪音是是令人討厭或干擾的聲音，在壓縮機工作的同時還會發出不同程度的噪音，影響工作人員的身心健康。有效得減小噪音事在必行。
減小噪音的主要方法有1、保機體中的所有接頭是安全的，叉車孔關閉，機組地面的基體是固封住的。2、通過管道輸送進氣和排氣。 3、減少反射噪聲。通過以上3點設計和預防，進一步減小產生的噪音。此外，還有不少減小噪音的途徑。通過種種減小噪音的方法，使壓縮機真正的實現規范化，符合國家規定的標準。
關鍵詞：壓縮機，V形帶，螺桿，噪音.
By compressor manufacturers in the study and on-line information integration, this will be designed to brief air compressor suction, exhaust the process of working principle and effective method of reducing noise.
Suction, exhaust in the compression process is completed Gang Li. Breathing or affect its emissions factors rotor diameter, the length of the rotor; P (pressure), T (temperature), altitude, n (speed), V (MS gap volume), the leakage. The former are design factors, which are factors campaign. Reasonable use of these factors can effectively improve the efficiency of the compressor, thereby improving productivity.
Yes yes noise nuisance or interfere with the voice of the compressor will be issued at the same time the work of different levels of noise and affect the physical and mental health staff. Effective in reducing noise is inevitable.
The main method of reducing noise there, in all-body joints are safe, forklift hole closed, the ground crew is solid matrix sealed. 2, piped through the intake and exhaust. 3, reducing reflection noise. Through the above 3:00 design and prevention, and further reduce the noise generated. In addition, there are many ways of reducing noise. Reduce noise through a variety of methods, to achieve real standardization compressor, in line with the state standards.
Key words: compressor, V-shaped belt, screw, noise.
目錄
CAD中英文對照…………………………………………………………………………………..1
課題報告…………………………………………………………………………………………..10
第一章 引言…………………………………………………………………………11
第二章 螺桿壓縮機的介紹........................................................................................12
一.發展歷程…………………………………………………………………...12
二.發展方向…………………………………………………………………...12
三.螺杠壓縮機的研究意義…………………………………………………...13
四.螺杠壓縮機的原理………………………………………………………...15
五.螺杠壓縮機的操作規程…………………………………………………..16
第三章 參數及選取原則............................................................................................19
3.1.型線參數……………………………………………………………...........19
3.1.1型線種類……………………………………………………………...19
3.1.2轉子齒數……………………………………………………………...19
3.1.3齒高半徑 ……………………………………………………………20
3.1.4齒頂高………………………………………………………………...20
3.2轉子結構參數……………………………………………………………….20
3.2.1轉子直徑和長徑比…………………………………………………...20
3.2.2導程和和扭轉角……………………………………………………...20
3.2.3排氣壓力和吸氣壓力………………………………………………...21
3.2.4壓縮機的排量………………………………………………………...21
第四章 電動機的選擇及V帶的設計.....................................................................22
4. 1電動機的型號………………………………………………………………22
4.2 V帶的設計…………………………………………………………….........22
4.3螺桿壓縮機的功率………………………………………………………….25
第五章.噪音及減小噪音的途徑…………………………………………………....26
5.1噪音………………………………………………………………………….26
5.2噪音的測量………………………………………………………………….26
5.3噪聲防止途徑……………………………………………………………….28
第六章 結束語............................................................................................................30
第七章 參考文獻……………………………………………………………………31
第八章 附錄…………………………………………………………………………32
第九章 感謝信............................................................................................................34
4