M200A氣瓶的三維造型設計【說明書+SOLIDWORKS】

M200A氣瓶的三維造型設計【說明書+SOLIDWORKS】,說明書+SOLIDWORKS,M200A氣瓶的三維造型設計【說明書+SOLIDWORKS】,m200a,三維,造型,設計,說明書,仿單,solidworks 南京理工大學泰州科技學院 畢業設計說明書(論文) 作 者: 任蕾蕾 學 號： 05010203 系　部: 機械系 專 業: 機械工程及自動化 題 目: M200A氣瓶的三維造型設計 副教授 黃新燕 指導者： 評閱者： 2009 年 6 月 畢業設計說明書（論文）中文摘要 氣瓶制造業在經濟高速發展的現代社會中被認為屬于朝陽工業范疇，氣體應用技術在發達國家已經達到很高水平。復合材料氣瓶在西方國家自上世紀后半葉以來得到飛速的發展，而國內對復合材料氣瓶的研究和設計才剛剛起步，針對該領域開展研究具有重要的理論意義與實用價值。本文在對氣瓶現有的結構、原理詳細分析的基礎上，通過SolidWorks軟件設計了M200A氣瓶的整體結構，建立了實體模型，并完成了工程圖；同時參考文獻資料，總結、制定了M200A氣瓶的裝配工藝流程，為氣瓶的規范化設計提供了指導。 關鍵詞 氣瓶 三維設計 裝配 畢業設計說明書（論文）外文摘要 Title Three-dimensional Design of Gas Cylinder M200A Abstract Gas cylinder manufacturing industry is considered as the sun-rise industry in today￠s rapid developing society. The application technology of a gas cylinder has reached a high level in developed countries. Composite cylinder has been developing rapidly since the second half of the last century in western countries, while the study and design of composite cylinder in our country has just started. It has great theoretical significance and practical value to research in the field. In this paper, by based on the existent studies, the whole structure of the gas cylinder is designed and the solid models are built on the SolidWorks platform. Then, the engineering drawings are also completed. In the end, the assembly process is determined. It will be useful for the design standardization of the gas cylinder. Keywords gas cylinder three-dimensional design assemble