《bs英國標準】bs en 8401 mobile waste containers — part 1 containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design》由會員分享，可在線閱讀，更多相關《bs英國標準】bs en 8401 mobile waste containers — part 1 containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design（21頁珍藏版）》請?jiān)谘b配圖網上搜索。
1、BRITISH STANDARD BS EN
840-1:2004
Mobile waste containers —
Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design
The European Standard EN 840-1:2004 has the
2、 status of a
British Standard
ICS 13.03
National foreword
This British Standard is the official English language version of
EN 840-1:2004. It supersedes BS EN 840-1:1997 which is wi
3、thdrawn.
The UK participation in its preparation was entrusted by Technical Committee B/508, Waste management, to Subcommittee B/508/1, Waste containers and associated lifting devices, which has the responsibility to:
— aid enquirers to understand the text;
— present to the responsible intern
4、ational/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;
— monitor related international and European developments and promulgate them in the UK.
A list of organizations represented on this subcommittee can be obtained on requ
5、est to its secretary.
Cross-references
The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI
6、 Electronic Catalogue or of British Standards Online.
This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.
Compliance with a British Standard does not of itself confer immunity from legal obligations.
7、
This British Standard was published under the authority of the Standards Policy and Strategy Committee on
18 March 2004
? BSI 18 March 2004
ISBN 0 580 43566 0
Summary of pages
This document comprises a front cover, an inside front cover, t
8、he EN title page, pages 2 to 17 and a back cover.
The BSI copyright notice displayed in this document indicates when the document was last issued.
Amd. No.
Date
Comments
Amendments issued since publication
EUROPEAN STANDARD NORME EUROPéENNE
EUROP?ISCHE NORM
9、EN 840-1
March 2004
ICS 13.030.40 Supersedes EN 840-1:1997
English version
Mobile waste containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design
Conteneurs roulants à déchets - Partie 1: Conteneurs à
10、2 roues de capacité jusqu'à 400 l pour lève-conteneurs à peigne - Dimensions et conception
Fahrbare Abfallsammelbeh?lter - Teil 1: Beh?lter mit 2
R?dern und einem Nennvolumen bis 400 l für
Kammschüttungen - Ma?e und Formgebung
This European Standard was approved by CEN on 10 December 2003
11、.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained
12、 on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secre
13、tariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
14、Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I Té EUR O P éEN DE NOR M A L I S A TI ON EUR O P ? I S C H ES KOM I TEE F ü R NOR M UNG
Management Centre: rue
15、 de Stassart, 36 B-1050 Brussels
? 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.
Ref. No. EN 840-1:2004: E
Contents page
Foreword ....................................................................
16、......................................................................................... 3
1 Scope ..................................................................................................................................................... 4
2 Normative references ...................
17、........................................................................................................ 4
3 Terms and definitions........................................................................................................................... 4
4 Volumes ............................
18、..................................................................................................................... 5
5 Dimensions and design........................................................................................................................ 5
6 Nominal load..............
19、............................................................................................................................ 6
7 Safety and health requirements .......................................................................................................... 6
8 Testing ...............
20、.................................................................................................................................... 6
9 Marking .................................................................................................................................................. 6
21、10 Designation............................................................................................................................................ 7
Annex A (informative) Nomenclature ........................................................................................................
22、..... 12
Annex B (informative) Recommendations for manufacturers of lifting devices ....................................... 16
Annex C (informative) A-Deviations ............................................................................................................... 17
23、
Foreword
This document (EN 840-1:2004) has been prepared by Technical Committee CEN/TC 183 “Waste management”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by
24、endorsement, at the latest by September 2004, and conflicting national standards shall be withdrawn at the latest by September 2004.
This document supersedes EN 840-1:1997.
This draft European Standard is one part of the series of standards of EN 840 about "Mobile
25、waste containers" comprising the following parts:
Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design.
Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimension
26、s and design.
Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design.
Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG and/or wide comb lifting dev
27、ice - Dimensions and design.
Part 5: Performance requirements and test methods. Part 6: Safety and health requirements.
Annexes A, B and C are informative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement
28、 this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
29、
1 Scope
This European Standard specifies dimensions and design requirements of mobile waste containers with
2 wheels, with capacity up to 400 l to be used by comb lifting devices.
2 Normative references
This European Standard incorporates, by dated or undated reference, prov
30、isions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it
31、by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments).
EN 840-5, Mobile waste containers - Part 5: Performance requirements and test methods.
EN 840-6, Mobile waste containers - Part 6: Safety and health requirements.
32、
EN 1501-1, Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 1: Rear-end loaded refuse collection vehicles.
EN ISO 11469, Plastics - Generic identification and marking of plastics products (ISO 11469:2000).
3 Terms and
33、definitions
Terms for components of mobile waste containers and lifting devices in three languages are given in annex A. For the purposes of this European Standard, the following terms and definitions apply.
mobile waste container
appropriately designed container fitted with wheels intended t
34、o temporarily store waste
lifting device
structure which picks-up, tilts and empties containers
comb lifting device
lifting device in which the picking-up system consists of a row of teeth and a locking system to retain the container during emptying
3.4 volume
total space inside the
35、container when the lid is closed (see Table 1)
nominal volume
volume stated by the manufacturer (see Table 1 without tolerances)
3.6 capacity
for the purpose of this standard nominal volume and capacity are deemed to be the same
NOTE The English term "capacity" and the French term
36、 "capacité" are translated in the German version by the term
"Nennvolumen".
nominal load
load mass, which is calculated as given in clause 6
total permissible mass
mass of the container plus the nominal load
functional and safety dimensions
essential dimensions which ensure the fu
37、nctionality and interchangeability of the container with the compatible lifting device and which are necessary for the operator's safety and health
4 Volumes
This standard identifies the two classes of containers:
? Class I - small size (nominal volume up to 200 l);
? Class II - la
38、rge size (nominal volume between 200 l and 400 l).
Within the two above-mentioned classes of containers the volumes shown in Table 1 are identified.
Table 1 — Volumes
Volume in l
+18
+12
+8
130 ± 7
+6
140?12
+15
+15
+40
390 ± 20
80 -5
100 -5
120-6
210 -5
240 -5
39、
340-25
For methods of measuring capacity see EN 840-5.
The volumes shown in Table 1 correspond to mobile waste container's capacities at present used in Europe. Since there are some overlapping capacities due to the tolerances, client and manufacturer shall decide while ordering the ca
40、pacity chosen.
Nominal volumes different from those referenced in Table 1 can be used by agreement between user and manufacturer. The tolerance of the volumes shall be ± 10 % maximum measured according to EN 840-5.
5 Dimensions and design
5.1 The design of the containers need not corres
41、pond to the drawings given in Figure 1. The functional dimensions given in Tables 2 and 3 shall be respected. Recommendations for manufacturers of lifting devices are given in annex B (see also EN 1501-1).
5.2 The container shall be constructed so that when it is unloaded or loaded with a nominal
42、 load (see clause 6), it fits on an approved compatible lifting device. It shall be automatically locked safely into the lifting device during the lifting operation. The frontal receiver shall correspond to one of the options given in Figure 2 (Form A, B or C).
5.3 The lid(s) shall fit the body.
43、It/they shall be made with at least 2 fixing points and have at least one means of opening.
5.4 Each wheel shall be capable of withstanding a static load of 100 kg.
5.5 All the surfaces of the container including design features shall be smooth and free of any foreign bodies or flaws.
44、
5.6 The container shall be able to be immobilised by design.
6 Nominal load
The container shall be constructed strongly enough to carry a load of 0,4 kg/dm3 x nominal volume.
7 Safety and health requirements
The container shall meet the safety and health requirements according
45、 to EN 840-6.
8 Testing
The container shall fulfil the performance requirements and the tests of EN 840-5.
9 Marking
9.1 Each container complying with the requirements of this European Standard shall be durably and readably marked on the body in a visible part with:
? num
46、ber of this European Standard (EN 840-1);
? nominal volume;
? manufacturer’s name or trademark;
? total permissible mass, in kilograms;
? year and month of manufacturing.
9.2 Additional marking for quality, recycling, etc. is allowed. Beginning 5 years after the publication of thi
47、s standard, plastic parts of containers, lids and wheels shall be marked in accordance with EN ISO 11469. The use of recycled materials is allowed, presuming that all requirements of this standard are complied with.
10 Designation
The container complying with the requirements of this E
48、uropean Standard shall be designated as follows: Container EN 840-1 240 A 96
Description
Standard number
Nominal volume, in litres
Frontal receiver form:
A = frontal receiver form A B = frontal receiver form B C = frontal receiver form C
Nominal load,
in kilograms
T
49、able 2 — Dimensions for containers from 80 l to 140 l – Class I (up to 200 l)
Dimensions in mm
365-25
365-25
365-25
Dimen- sion N°
80 l
100 l
120 l
130 l
140 l
Remarks
a
b
a
b
a
b
a 1
448 ± 5
480 ± 5
472 ± 5
505 max
50、.
472 ± 5
505 max.
Total width of the container
a 2
448 ± 5
480 ± 5
472 ± 5
390 ± 10
480 ± 5
472 ± 5
390 ± 10
480 ± 5
Width of the frontal receiver
3
530 max.
555 max.
558 max.
555 max.
558 max.
555 max.
4
975 max.
1021 max.
1005 max.
1021 max.
1100 max.
Tota
51、l height including handles on the lid
a 5
860 min.; 1030 max.
860 min.; 1030 max.
860 min.;
1030 max.
860 min.; 1030 max.
860 min.; 1030 max.
6
450 max.
490 max.
497 max.
490 max.
497 max.
490 max.
7
1010 max.
1090 max.
1010 max.
1090 max.
1155 max.
8
430 min.; 670
52、 max.
430 min.; 670 max.
430 min.;
670 max.
430 min.; 670 max.
430 min.; 670 max.
For 300 mm wheels, the maximum dimension is
70 mm more
a 9
410 max.
450 max.
440 ± 10
440 ± 10
440 ± 10
450 max.
10
320 ± 10
+20
455 ± 15
+20
455 ± 15
+20
a 11
195 min.
195 min.
195 min.
53、
195 min.
195 min.
Larger wheels accepted
a 12
19 min.
19 min.
19 min.
19 min.
19 min.
a 13
6 +2
?4,5
+2
6 ?4,5
+2
6 ?4,5
+2
6 ?4,5
6 +2
?4,5
a 14
25 min.
25 min.
25 min.
25 min.
25 min.
a 15
+5
+5
+5
+5
+5
a 16
+2
21?2
+2
21?2
+2
21?2
+2
21?2
21
54、+2
?2
17
-
-
-
-
-
This dimension is no more used.
a 18
26 ± 1
26 ± 1
26 ± 1
26 ± 1
26 ± 1
a
19
58 max.
58 max.
58 max.
58 max.
58 max.
a
20
20 min.
20 min.
20 min.
20 min.
20 min.
a
21
130 max.
130 max.
130 max.
130 max.
130 max.
22
15 max.
55、15 max.
15 max.
15 max.
15 max.
a
23
+8
33 0
+8
+8
+8
+8
a
24
40 +5
?7
40 +5
?7
40 +5
?7
40 +5
?7
40 +5
?7
25
230 ± 12
-
279 ± 5
270 ± 12
279 ± 5
270 ± 12
Optional measurement
a
26
147 ± 8
180 ± 5
180 ± 5
291 ± 5
180 ± 5
180 ± 5
291 ± 5
180 ± 5
Compuls
56、ory dimensions when ribs are fitted, max. ribs thickness 6 mm
27
270° min.
270° min.
270° min.
270° min.
270° min.
a Compulsory dimensions for functional and safety reasons. The other dimensions indicated are suggested recommended values.
13-3
13-3
13-3
13-3
13
57、-3
33 0
33 0
33 0
33 0
Table 3 — Dimensions for containers from 210 l to 400 l – Class II (> 200 l)
Dimensions in mm
-15
Dimension N°
210 l
240 l
340 l
390 l
Remarks
a
b
a
b
a 1
58、546 ± 5
580 ± 5
665 max.
745 ± 5
Total width of the container
a 2
546 ± 5
407 ± 10
580 ± 5
590 ± 20
745 +5
660 ± 10
Width of the frontal receiver
3
730 max.
740 max.
880 max.
810 max.
4
1095 max.
1100 max.
1115 max.
1095 max.
Total height including handles on the lid
59、a 5
860 min.; 1030 max.
860 min.; 1030 max.
860 min.; 1030 max.
860 min.; 1030 max.
6
565 max.
590 max.
590 max.
775 max.
7
1180 max.
1190 max.
1250 max.
1200 max.
8
560 min.; 760 max.
560 min; 760 max.
560 min; 760 max.
560 min; 760 max.
For 300 mm wheels, the maximum
60、dimension is 70 mm more
a 9
490 ± 10
550 ± 7
650 max.
719 ± 10
10
515 ± 15
430+20
?30
565 max.
722 ± 5
a 11
195 min.
195 min.
195 min.
195 min.
Larger wheels accepted
a 12
19 min.
19 min.
19 min.
19 min.
a 13
6 +2
?4,5
+2
6 ?4,5
+2
6 ?4,5
6 +2
?4,5
a 14
25 mi
61、n.
25 min.
25 min.
25 min.
a 15
+5
+5
+5
+5
a 16
+2
21?2
+2
21?2
+2
21?2
21+2
?2
a 17
-
-
-
-
This dimension is no more used
a 18
26 ± 1
26 ± 1
26 ± 1
26 ± 1
a 19
58 max.
58 max.
58 max.
58 max.
a 20
20 min.
20 min.
20 min.
20 min.
a 21
130
62、max.
130 max.
130 max.
130 max.
22
15 max.
15 max.
15 max.
15 max.
a 23
+8
33 0
+8
33 0
+8
33 0
33+8
0
a 24
+5
40 ?7
+5
40?7
+5
40?7
40+5
?7
25
345 ± 5
352+5
?2
355 max.
530 ± 5
Optional measurement
a 26
291 ± 5
+3
291?5
+5
300?10
+5
291 ± 5
Compulso
63、ry dimensions when ribs are fitted, max. ribs thickness 6mm
27
270° min.
270° min.
270° min.
270° min.
a Compulsory dimensions for functional and safety reasons. The other dimensions indicated are suggested recommended values.
13-3
13-3
13-3
13-3
3
64、90-10
Figure 1 — System dimensions
Key
A Form A B
65、 Form B
C Form C
Figure 2 — Options for frontal receivers
Annex A
(informative)
Nomenclature
Table A.1 — Terms of waste containers, lifting devices and waste collection vehicles
No
English
French
German
1
Waste container
Conteneur à déchets
Abfallsammelbeh?lte
66、r
2
Large-scale refuse container
Grand Conteneur pour déchets
Abfallgro?beh?lter
3
Bulk refuse container
Grand conteneur
Gro?beh?lter
4
Container
Conteneur
Beh?lter
5
Mobile waste container
Conteneur à déchets roulant
fahrbarer Abfallsammel- beh?lter
6
Disposable container
Conteneur à usage unique
Einwegbeh?lter
7
Dustbin
Poubelle
Abfalltonne
8
Refuse sack
Sac à déchets
Abfallsack
9
Sackstand
Support sac
Abfallsackst?nder
10a
Body
Corps
Rumpf
11a
Draft angle
bs英國標準】bs en 8401 mobile waste containers — part 1 containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design
