歡迎來到裝配圖網! | 幫助中心 裝配圖網zhuangpeitu.com!
裝配圖網
ImageVerifierCode 換一換
首頁 裝配圖網 > 資源分類 > DOC文檔下載  

錨桿的分析模型畢業課程設計外文文獻翻譯

  • 資源ID:12883606       資源大?。?span id="kfwdmou" class="font-tahoma">74KB        全文頁數:8頁
  • 資源格式: DOC        下載積分:10積分
快捷下載 游客一鍵下載
會員登錄下載
微信登錄下載
三方登錄下載: 微信開放平臺登錄 支付寶登錄   QQ登錄   微博登錄  
二維碼
微信掃一掃登錄
下載資源需要10積分
郵箱/手機:
溫馨提示:
用戶名和密碼都是您填寫的郵箱或者手機號,方便查詢和重復下載(系統自動生成)
支付方式: 支付寶    微信支付   
驗證碼:   換一換

 
賬號:
密碼:
驗證碼:   換一換
  忘記密碼?
    
友情提示
2、PDF文件下載后,可能會被瀏覽器默認打開,此種情況可以點擊瀏覽器菜單,保存網頁到桌面,就可以正常下載了。
3、本站不支持迅雷下載,請使用電腦自帶的IE瀏覽器,或者360瀏覽器、谷歌瀏覽器下載即可。
4、本站資源下載后的文檔和圖紙-無水印,預覽文檔經過壓縮,下載后原文更清晰。
5、試題試卷類文檔,如果標題沒有明確說明有答案則都視為沒有答案,請知曉。

錨桿的分析模型畢業課程設計外文文獻翻譯

Analytical models for rock bolts.C.L*,StillborgAbstractThree analytical models have been developed for rock bolts: one for bolts subjected to concentrated pull load in pullout tests, one for bolts installed in uniformly deformed rock masses, and one for bolts subjected to the opening of individual rock joints. The development of the models has been based on the description of the mechanical coupling at the interface between the bolt and the grout medium for grouted bolts, or between the bolt and the rock for frictionally coupled bolts. For rock bolts in the pullout tests, the shear stress of the interfaces exponentially with increasing distance from the point of loading when the deformation is compatible across the interface. Decoupling may start first at the loading point when the applied load is large enough and then propagate towards the far end of the bolt with a further increase in the applied load. The magnitude of the shear stress on the decoupled bolt section depends on the coupling mechanism at the interface. For fully grouted bolts, the shear stress on the decoupled section is lower than the peak shear strength of the interface while for fully frictionally coupled bolts if is approximately the same as the peak shear strength. For rock bolts installed in uniformly deformed rock, the loading process of the bolts due to rock deformation has been taken into account in developing the model. Model simulations confirm the previous findings that a bolt in situ has a pick-up length, an anchor length and neutral point. It is also revealed that the face plate plays a significant role in enhancing the reinforcement effect. In jointed rock masses, several axial stress peaks may occur along the bolt because of the opening of rock joints intersecting the bolt.1. IntroductionRock bolts have been widely used for rock reinforcement in civil and mining engineering for a long time. Bolts reinforce rock masses through restraining the deformation within the rock masses. In order to improve bolting design, it is necessary: to have a good understanding of the behaviour of rock bolts in deformed rock masses. This can be acquired through field monitoring, laboratory tests, numerical modeling and analytical studies.Since the 1970s, numerous researchers have carried out field monitoring work on rock bolts installed in various rock formations. Freeman performed pioneering work in studying the performance of fully grouted rock bolts in the Kielder experimental runnel. He monitored both the loading process of the bolts and the distribution of his monitoring data, he proposed the concepts of “neutral point” “pick-up length” and “anchor length”. At the neutral point, the shear stress at the interface between the bolt and the grout medium is zero, while the tensile axial load of the bolt has a peak value. The pick-up length refers to the section of the bolt from the near end of the bolt (on the tunnel wall) to the neutral point. The shear stresses on this section of the bolt pick up the load from the rock and drag the bolt towards the tunnel. The anchor length refers to the section of the bolt from the neutral point to the far end of the bolt (its seating deep in the rock). The shear stresses on this section of the bolt anchor the bolt to the rock. These concepts clearly outline the behaviour of fully grouted rock bolts in a deformed rock formation. Bjonfot and Stephanssons work demonstrated that in jointed rock masses there may exist not only one but several neutral points along the bolt because of the opening displacement of individual joints.Pullout tests are usually used to examine the anchoring capacity of rock bolts. A great number of pullout tests have been conducted so far in various types of rocks. Farmer carried out fundamental work in studying the behaviour of bolts under tensile loading. His solution predicts that the axial stress of the bolt (also the shear stress at the bolt interface) will decrease exponentially from the point of loading to the far end of the bolt before decoupling occurs. Fig.1(a) illustrates the results of a typical pullout test. Curve a represents the distribution of the axial stress along the bolt under a relatively low applied load, at which the deformation is compatible on both sides of the bolt interface. Curve b represents the axial stress along the bolt at a relatively high applied load, at which decoupling has occurred at part of the bolt interface. Fig.1(b) shows the axial stress along a rock bolt installed in an underground mine drift. It is seen from this figure that the distribution of the axial stress along the section close to the borehole collar is completely different from that in pullout tests. However, along the section to the far end of the bolt, the stress varies similarly to that in pullout tests. The reason Fig.1 Distribution if the axial stress (a) along a grouted steel bar during pullout test, after Hawkes and Evan, and (b) along a grouted rock bolt in situ after sunfor these results is that bolts in situ have a pick-up length and an anchor length, while bolts in pullout tests only have an anchor length.It is thought that the relative movement between the rock and the bolt is zero at the neutral point. In the solution by Tao and Chen, the position of the neutral point depends only on the radius of the tunnel and the length of the bolt. That solution was implemented in the analytical models created by Indraratna and Kaiser and Hyett et.al. It seems that Tao and Chens solution is valid only when the deformation is compatible across the bolt interface. When decoupling occurs, the position of the neutral point is obviously also related to the shear strength of the interface. Field monitoring and pullout tests have indicated two facts concerning the loading of a rock bolt in situ: (1) rock deformation applied a load on the pick-up section of the bolt; (2) the load on the pick-up section drags the anchor section of the bolt towards the underground opening. These two facts must be taken into account in developing analytical models for rock bolts.The aim of this paper is to develop analytical models for fully coupled rock bolts. A model for rock bolts in pullout tests is introduced first, together with a description of the theoretical background, the development of the model and an illustrative example. Two models for rock bolts in situ are then presented, one in rock masses. The details of the development of the models are summarized in the appendices.2.Coupling between the bolt and the rockWindsor proposed the concept that a reinforcement system comprises four principal components: the rock, the reinforcing element, the internal fixture and the external fixture. For reinforcement with a bolt, the reinforcing element refers to the bolt and the external fixture refers to the face plate and nut. The internal fixture is either a medium, such as cement mortar or resin for grouted bolts, or a mechanical action like “friction” at the bolt interface for frictionally coupled bolts. The internal fixture provides a coupling condition at the interface. With reference to the component of internal fixture, Windsor classified the current reinforcement devices into three groups: “continuously mechanically coupled (CMC)”, “continuously frictionally coupled (CFC)”, “discretely mechanically or frictionally coupled (DMFC)” systems. According to this classification system, cement and resin-grouted bolts belong to the CMC system, while Split set and Swellex bolts belong to the CFC system.When fully grouted bolts are subjected to a pull load, failure may occur at the bolt grout interface, in the grout medium or at the grout rock interface depending on which one is the weakest. For fully frictionally coupled bolts, however, there is only one possibility if failure decoupling at the bolt rock interface. In this study we concentrate on the failure at the interface between the bolt and the coupling medium (either the grout medium or the rock).In general, the shear strength of an interface comprises three components: adhesion, mechanical interlock and friction. They are lost in sequence as the compatibility of deformation is lost across the interface. The result is a decoupling front that attenuates at an increasing distance from the point of the applied load. The decoupling front first mobilizes the adhesive component of strength, then the mechanical interlock component and finally the frictional component. The shear strength of the interface decreases during this process. The shear strength after the loss of some of the strength components is called the residual shear strength in this paper. For grouted rock bolts like rebar, all the three components of strength exist at the bolt interface. However, for the fully frictionally coupled bolt, the “Split set” bolt, only a friction component exists at the bolt interface. For Swelles bolts, mechanical interlock and friction comprise the strength of the interface.3. The theoretical background of rock bolts in pullout tests4.Concluding remarksAn analytical model has been established for rock bolts subjected to a pull load in pullout tests. Decoupling starts at the loading point and propagates along the bolt with an increasing applied load. The shear stress at the decoupled interface is lower than the ultimate shear stress strength of the interface and even drops to zero for fully grouted bolts, while it is approximately at the same magnitude as the ultimate shear stress strength for fully frictionally coupled interface decreases exponentially with increasing distance from the decoupling bolt.Two analytical models have been developed for rock bolts in situ, one for uniform rock deformation and another for discrete joint opening. For rock bolts in situ, the models confirm the previous findings: (i) in uniformly deformed rock masses, the bolt has a pick-up length, an anchor length and a neutral point;(ii) the face plate enhances the reinforcement effect through inducing a direct tensile load in the bolt and reducing the shear stress carried on the bolt surface;(iii) in jointed rock masses, the opening displacement of rock joint will induce axial stress peaks in the bolt.中文譯文錨桿的分析模型C.Li*,B.Stillborg摘要:有三種錨桿的分析模型發展了起來:一種是在拉斷試驗中,易受到集中拉力載荷影響作用的錨桿,一種是安裝在均勻變形巖體中的錨桿,另一種是易受到單個巖石節理影響作用的錨桿。這種分析模型是在注漿錨桿的錨桿與注漿之間或者是磨擦式錨桿的錨桿與巖石之間接觸面上的機械耦合作用描述的基礎上建立起來的。對于拉斷試驗中的錨桿,當接觸面上的變形較小時,錨桿表面上的剪切應力隨著距加載點距離的增加而成指數減小。如果施加的載荷足夠大時,耦合首先發生加載點處,然后隨著載荷的增加而逐漸向錨桿的深處傳播。錨桿耦合部分的剪切應力的大小取決于接觸面上的機械耦合作用。對于全長錨固錨桿來說,耦合階段的剪切應力比接觸面上的剪切強度的峰值要小,然而對于磨擦式錨桿,剪切應力大致和剪切強度的峰值相同。安裝在均勻變形巖體中的錨桿,在建立錨桿分析模型時,錨桿的加載過程要考慮到巖體的變形情況。模型的模擬實驗證實了先前的研究結果,在軟巖中的錨桿有傳感長度,錨固段長度,和一個中性點。這個實驗也說明了錨桿托盤在圍巖加固的效果中起著一個非常重要的作用。在有節理的巖體中,由于巖石節理的自由變形作用,錨桿軸向可能會有幾個應力峰值發生在錨桿的延伸方向。1、前言在很長一段時間來,錨桿廣泛的應用于民用建筑和礦業工程的巖石加固。錨桿通過在巖體中抑制巖體的變形來加固圍巖。為了提高錨桿支護的結構,必須對在變形巖體中的錨桿的作用變化過程有一個良好的認識。這些認識可以通過現場監測、實驗室的試驗、數字模擬和研究分析來獲得。自從20世紀70年代來,在不同的巖石地層中進行了大量的錨桿現場監測的研究工作。一個自由人士在Kielder的試驗巷道中,進行了大量關于注漿錨桿特性的研究工作。他監測了錨桿的加載過程和應力沿錨桿的分布情況。在他所監測數據的基礎上,他提出了關于“傳感長度”、“錨固長度”、“中性點”的概念。在中性點上,錨桿和注漿之間的接觸面上的剪切應力為零,然而在該點其軸向載荷的張力是一個峰值。傳感長度指的是從接近錨桿末端的地方(在巷道壁上)到中性點的一段距離。在錨桿這部分是其剪切應力來自于巖石的載荷,并把錨桿向巷道方向進行拖拉。錨固長度指的是從錨桿的中性點到錨桿深處(固定在巖石深度)的一部分錨桿。在這部分上的剪切應力將錨桿錨固在巖石上。以上這些概念清楚的指出了安裝在已變形巖層中的錨桿的作用變化過程。Bjornfot和Stephansson的研究工作證明,在已有節理的巖體中,由于單個節理的由自變形,在沿錨桿的方向上可能不僅存在一個中性點而且有可能存在多個中性點。錨桿的拉斷試驗通常用來監測錨桿的錨固能力,在不同種類的巖石中已經進行了大量的這種拉斷試驗工作測試。一著名人士進行了大量的基礎工作來研究在拉力負荷的張力作用下錨桿的作用變化過程。他的解析方法指出:在錨桿發生耦合以前,錨桿的軸向應力(也可能是錨桿接觸表面上的剪切應力)從加載點到錨桿的深處呈指數減小的趨勢。圖1(a)說明了這種典型拉斷試驗的結果,曲線a表示的是在相對較低的載荷情況下,沿錨桿方向軸向應力的分布情況,在這個圖中可以看出,在錨桿錨固界面的兩則,其變形是相等的。曲線b表示的是在相對較高的載荷下,沿錨桿方向軸向應力的分布,在此圖上,錨桿接觸面上已經發生了耦合作用。圖1(b)表示的是安裝在地下煤礦的主水平巷中的錨桿上的軸向應力分布情況。我們可以從這個圖上看出,在接近鉆孔口附近的軸向應力分布情況與在拉斷試驗中的分布情況完全不同。然而,錨桿深處階段部分的的應力變化與拉斷試驗中的結果相似。出現這種情況的原因是,在軟巖中的錨桿有傳感長度和錨固長度,然而在拉斷試驗中的錨桿僅有錨固長度。圖1在拉斷試驗中,(a)軸向應力沿在Hawkes和Evans之后的全錨固錨桿和(b)Sun之后的加固錨桿的分布我們認為在錨桿中性點上,巖石和錨桿之間的相對移動為零。在陶和陳的分析方法中,中性點的位置僅僅取決于巷道的半徑和錨桿的長度。這種解決方法完善了由Kaiser和Hyett發明的分析模型。這看起來好在像陶和陳的解決方法只有當通過錨桿的界面點時,其變形量相互兼容時,才是有效的;當發生耦合后,中性點的位置與接觸面的剪切應力強度有明顯的關系?,F(xiàn)場監測和拉斷實驗都表明在軟巖中錨桿的載荷與兩個因素有一定的關系:(1)當在錨桿的傳感段施加一定的載荷時的巖石變形量;(2)把錨固段拉向地下巷道壁面的傳感段的載荷。所以當建立錨桿分析的模型時,必須把這兩個因素考慮進去。本論文的主要目的是建立一個耦合錨桿的分析模型。首先介紹的是一個在錨桿拉斷實驗中的錨桿模型,并且對其理論背景,模型的建立過程和說明的例子進行一下描述。然后說明兩種在軟巖中的錨桿的分析模型,一種是在均勻變形的巖體中,一種是在節理的巖體中。2、錨桿和巖石的聯結Windsor指出錨桿的加固系統包含四個基本元件的概念:巖石、錨固構件、內部固定物和外部固定物。用錨桿進行加固圍巖時,錨固構件是指錨桿;外部固定物是指錨桿托盤和螺冒。內部固定物是下面介質的兩者或兩者之一,例如錨注錨桿的水泥灰漿或樹脂,或者是機械力學作用如摩擦式錨桿接觸面上的摩擦力。內部固定物在錨桿的接觸面上起到一種聯結作用。由于上面所提到的內部固定物的構成不同,Windsor把目前的加固設施分為了三大類:“連續機械聯結(CMC)”,“連續摩擦聯結(CFC)”,“非連續機械或者摩擦聯結(DMFC)”系統。通過這個分類,水泥赤漿和樹脂錨固錨桿屬于連續機械聯結系統,而斯普利特(管縫)錨桿和斯韋萊克斯水脹錨桿屬于連續摩擦式系統。當全長錨固錨桿受到拉力載荷的作用時,在注漿的接觸面、注漿介質或是在注漿巖石的接觸面上有可能會發生失效,這取決于它們之中那一個更加軟弱。然而對于摩擦式錨桿,這里只有一種失效的可能性,即是發生在錨桿與巖石的耦合接觸面上。在這項研究中,我們僅專注于錨桿與聯結介質(或者是注漿介質或者是巖石)之間的耦合失效。通常,接觸面的剪切應力強度包含三個方面的因素:粘附力、機械聯結和摩擦。這些因素常在順序上被忽視如錨桿的接觸面的變形相等性被忽視等,結果使耦合面隨著距加載點距離的增大而逐漸的衰減。這個耦合面首先能加強粘附元件的強度,然后就是機械聯結元件,最后是摩擦元件。在些過程中,他們的剪切強度將會減小。當其中的一些強度元件失效后,在本論文中,其剪切強度叫做殘余剪切強度。注漿錨桿如加固錨桿,其所有的三個強度元素均存在于錨桿的接觸面上。然而,摩擦式錨桿、斯普利特錨桿僅有一個摩擦強度成分存在于錨桿的接觸面上。斯韋萊克斯水脹錨桿中的機械聯結力和摩擦力構成了其接觸面的強度。3、錨桿拉斷試驗的理論背景4、結論一個錨桿在拉斷試驗中受到拉力作用的分析模型就這樣建立起來了,耦合作用發生在錨桿的加載位置處,并且隨著所加載荷的增加沿錨桿方向傳播。全錨固錨桿在耦合界面的剪切應力小于最終接觸面上的剪應力,甚至?xí)档偷搅?。然而,摩擦式錨桿在此面上的剪切應力大致和最終的剪應力強度的大小相同。在沒有耦合部分的錨桿上,其前應力隨著距耦合界面的距離的增大而成指數方式減小。在軟巖中建立了兩種錨桿的分析模型,一種是在均勻變形的巖石中,另一種是不連續的節理面中。在軟巖中的錨桿模型確定以先前的一個調查結果(1)在均勻變形的巖體中,錨桿有一個傳感長度,一個錨固長度和一個中性點;(2)錨桿托盤通過增加錨桿的軸向拉力載荷和降低錨桿表面的剪應力來加固圍巖的效果;(3)在有節理的巖體中,巖石處的節理的自由變形將會降低錨桿軸向的應力峰值。

注意事項

本文(錨桿的分析模型畢業課程設計外文文獻翻譯)為本站會員(Q145****609)主動上傳,裝配圖網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對上載內容本身不做任何修改或編輯。 若此文所含內容侵犯了您的版權或隱私,請立即通知裝配圖網(點擊聯系客服),我們立即給予刪除!

溫馨提示:如果因?yàn)榫W(wǎng)速或其他原因下載失敗請重新下載,重復下載不扣分。




關于我們 - 網站聲明 - 網站地圖 - 資源地圖 - 友情鏈接 - 網站客服 - 聯系我們

copyright@ 2023-2025  zhuangpeitu.com 裝配圖網版權所有   聯系電話:18123376007

備案號:ICP2024067431號-1 川公網安備51140202000466號


本站為文檔C2C交易模式,即用戶上傳的文檔直接被用戶下載,本站只是中間服務平臺,本站所有文檔下載所得的收益歸上傳人(含作者)所有。裝配圖網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對上載內容本身不做任何修改或編輯。若文檔所含內容侵犯了您的版權或隱私,請立即通知裝配圖網,我們立即給予刪除!