《【BS英國標準】BS EN 1312112003 地面用GRP槽罐和容器.原材料.技術條件和驗收條件》由會員分享，可在線閱讀，更多相關《【BS英國標準】BS EN 1312112003 地面用GRP槽罐和容器.原材料.技術條件和驗收條件（25頁珍藏版）》請在裝配圖網上搜索。
1、Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Oct 25 10:34:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
BRITISH STANDARD BS EN
13121-1:2003
GRP tanks and vessels for use above ground —
Part 1: Raw materials — Specification conditions and acce
2、ptance conditions
The European Standard EN 13121-1:2003 has the status of a
British Standard
ICS 23.020.10
BS EN 13121
3、-1:2003
National foreword
This British Standard is the official English language version of
EN 13121-1:2003.
The UK participation in its preparation was entrusted by Technical Committee PRI/5, UK Steering Committee for CEN/TC210, to Subcommittee PRI/5/1, Glass reinforced tanks and vessels,
4、 which has the responsibility to:
— aid enquirers to understand the text;
— present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;
— monitor related international and European developments
5、 and promulgate them in the UK.
A list of organizations represented on this subcommittee can be obtained on request to its secretary.
Cross-references
The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue unde
6、r the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.
This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct a
7、pplication.
Compliance with a British Standard does not of itself confer immunity from legal obligations.
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Oct 25 10:34:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
This British Standard wa
8、s published under the authority of the Standards Policy and Strategy Committee on
30 May 2003
? BSI 30 May 2003
ISBN 0 580 41954 1
Summary of pages
This document comprises a front cover, an inside front cover, the EN title page,
pages 2 to 21 and a back cov
9、er.
The BSI copyright date displayed in this document indicates when the document was last issued.
Amd. No.
Date
Comments
Amendments issued since publication
EUROPEAN STANDARD NORME EUROPéENNE
EUROP?ISCHE NORM
EN 13121-1
May 2003
ICS 23.
10、020.10
English version
GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions
Réservoirs et récipients en PRV pour applications hors sol - Partie 1: Matières premières - Conditions de spécifications et conditions d'u
11、tilisation
Oberirdische GFK-Tanks und -Beh?lter - Teil 1: Ausgangsmaterialien - Spezifikations- und Annahmebedingungen
This European Standard was approved by CEN on 17 March 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
12、 giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official
13、 versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Bel
14、gium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION C O
15、M I Té EUR O P éEN DE NOR M A L I S A TI ON EUR O P ? I S C H ES KOM I TEE F ü R NOR M UNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Oct 25 10:34:28 GMT+00:00 2007, Uncontrolled
16、 Copy, (c) BSI
? 2003 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.
Ref. No. EN 13121-1:2003 E
EN 13121-1:2003 (E)
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Oct 25 10:34:28 GMT+00:00 2007, Uncontr
17、olled Copy, (c) BSI
Contents page
Foreword ..................................................................................................................................................................... 4
Introduction ...................................................
18、............................................................................................................. 5
1 Scope.............................................................................................................................................................. 5
2 Normative re
19、ferences ................................................................................................................................... 5
3 Terms, definitions, symbols and abbreviations......................................................................................... 7
3.1 Terms and
20、definitions ................................................................................................................................... 7
3.2 Symbols and abbreviations ......................................................................................................................... 7
21、
4 Thermosetting resins.................................................................................................................................... 8
4.1 General ..............................................................................................................................
22、............................. 8
4.2 Unsaturated polyester resins..................................................................................................................... 10
4.3 Vinylester resins............................................................................................
23、.............................................. 10
4.4 Vinylester urethane resins ......................................................................................................................... 10
4.5 Epoxy resins ...........................................................................
24、..................................................................... 10
4.6 Furane resins............................................................................................................................................... 10
4.7 Phenolic resins..........................................
25、.................................................................................................. 10
4.8 Characterisation of thermosetting resins in the uncured state ............................................................. 10
4.9 Characterisation of thermosetting resins in the cured state..
26、................................................................ 11
5 Curing agents for unsaturated polyester and vinylester resins ............................................................ 11
5.1 General ........................................................................................
27、................................................................. 11
5.2 Initiators ....................................................................................................................................................... 12
5.3 Accelerators, organometallic ..........................
28、........................................................................................... 12
5.4 Promotors .................................................................................................................................................... 12
5.5 Inhibitors ......................
29、................................................................................................................................ 12
6 Reinforcing materials ................................................................................................................................. 12
6.1 Gen
30、eral ......................................................................................................................................................... 12
6.2 Surface nonwovens ...................................................................................................................
31、................. 12
6.3 Chopped strand mats ................................................................................................................................. 13
6.4 Continuous strand mats .............................................................................................
32、................................ 13
6.5 Woven fabrics/Woven roving fabrics ........................................................................................................ 13
6.6 Rovings for winding and for chopping applications .............................................................
33、.................. 13
7 Additives ...................................................................................................................................................... 13
7.1 General ................................................................................................
34、......................................................... 13
7.2 Thixotropic agents ...................................................................................................................................... 13
7.3 Conductive fillers .....................................................
35、................................................................................... 14
7.4 Fire retardants ............................................................................................................................................. 14
7.5 Paraffin wax .............................
36、.................................................................................................................... 14
7.6 Aggregates and fillers ................................................................................................................................ 14
7.7 Ultra-violet ab
37、sorbers ................................................................................................................................. 14
7.8 Pigments .................................................................................................................................................
38、..... 14
7.9 Surface active agents ................................................................................................................................. 14
8 Thermoplastic lining materials ...............................................................................................
39、................... 14
8.1 General ......................................................................................................................................................... 14
8.2 Mechanical and thermal properties.....................................................................
40、...................................... 15
8.3 Welding consumables ................................................................................................................................ 17
8.4 Dimensional stability ..........................................................................
41、........................................................ 17
9 Material conformance documentation ...................................................................................................... 17
9.1 General .................................................................................
42、........................................................................ 17
9.2 Unsaturated polyester, vinylester and vinylester urethane resins ........................................................ 17
9.3 Epoxy resins and hardeners ..............................................................
43、........................................................ 17
9.4 Furane and phenolic resins ....................................................................................................................... 18
7
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu
44、 Oct 25 10:34:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
9.5 Curing agents and additives .......................................................................................................................18
9.6 Surface nonwovens ......................................................
45、...............................................................................18
9.7 Chopped strand mats ..................................................................................................................................18
9.8 Woven fabrics/Woven roving fabrics ....................
46、.....................................................................................18
9.9 Rovings for winding and for chopping applications ................................................................................18
9.10 Thermoplastic linings ..............................................
47、....................................................................................19
Annex ZA (informative) Relationship between this European Standard and the Essential Requirements
of EU Directive 97/23/EC......................................................................................
48、........................................20
Bibliography ..............................................................................................................................................................21
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu
49、 Oct 25 10:34:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
Foreword
This document (EN 13121-1:2003) has been prepared by Technical Committee CEN/TC 210, "GRP tanks and ves- sels", the secretariat of which is held by DIN.
This. European Standard shall be given the status of a nation
50、al standard, either by publication of an identical text or by endorsement, at the latest by November 2003, and conflicting national standards shall be withdrawn at the latest by November 2003.
This document has been prepared under a mandate given to CEN by the European Commission and the European
51、
Free Trade Association and supports essential requirements of EU directive(s).
For relationship with EU-Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun
52、-
tries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
Licensed Copy: Ins
53、titute Of Technology Tallaght, Institute of Technology, Thu Oct 25 10:34:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
Introduction
EN 13121 consists of the following parts under the general title "GRP tanks and vessels for use above ground":
Part 1 — Raw materials – Specification c
54、onditions and acceptance conditions
Part 2 — Composite materials – Chemical resistance
Part 3 — Design and workmanship
Part 4 — Delivery, installation and maintenance
These four Parts together define the responsibilities of the tank or vessel manufacturers, the materials manufactur- ers
55、or suppliers and the purchasers.
The design and manufacture of GRP tanks and vessels involve a number of different materials such as resins, plastics and reinforcing fibres and a number of different manufacturing methods. It is implicit that tanks and vessels conforming to this European Standard
56、should be made only by manufacturers and operators who are competent and suitably equipped to fulfil all requirements, using materials manufactured by competent and experienced mate- rial manufacturers.
Part 1 of this standard specifies the requirements for specification conditions and acceptance
57、 conditions for raw materials — resins, curing agents, thermoplastic linings, reinforcing materials and additives — in terms of both material technical properties and the manufacturing process. These requirements are necessary in order to estab- lish the chemical resistance properties determined in
58、Part 2 and the mechanical, thermal and design properties determined in Part 3. Together with the workmanship principles determined in Part 3, specification conditions and acceptance conditions for raw materials ensure that the tank or vessel will be able to meet its design requirements, particularly
59、 in terms of its chemical/thermal resistance and pressure and load supporting requirements. Part 4 of this standard specifies requirements for delivery, handling and installation and recommendations for maintenance of GRP tanks and vessels.
1 Scope
This European Standard gives requirements
60、 for specification and acceptance conditions of raw materials for GRP tanks and vessels with or without lining for storage or processing of fluids, factory made or site built, non pressur- ised or pressurised, for use above ground.
2 Normative references
This European Standard incorporates
61、 by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European St
62、andard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments).
EN 59, Glass reinforced plastics — Measurement of hardness by means of a Barcol impressor.
EN 10204:1991, Metallic products — T
63、ypes of inspection documents.
prEN 13121-2:1999, GRP tanks and vessels for use above ground — Part 2: Composite materials — Chemical resistance.
prEN 13121-3:2001, GRP tanks and vessels for use above ground — Part 3: Design and workmanship.
EN 29092, Textiles — Nonwovens — Definition.
EN
64、 ISO 75-2, Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
(ISO 75-2:1993).
EN ISO 178, Plastics — Determination of flexural properties (ISO 178:2001).
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Oct 25 10:34:28
65、 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
EN ISO 306, Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) (ISO 306:1994).
EN ISO 472:2001, Plastics — Vocabulary (ISO 472:1999).
EN ISO 527-2, Plastics - Determination of tensile properties -
66、 Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993 including Corr 1:1994).
EN ISO 868, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hard- ness) (ISO 868:2003).
EN ISO 1133, Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:1997).
EN ISO 1163-1:1999, Plastics — Unplasticized poly (vinyl chloride) (PVC-U) moulding and extrusion materials — Part 1
【BS英國標準】BS EN 1312112003 地面用GRP槽罐和容器.原材料.技術條件和驗收條件
