喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================
河北建筑工程學院
畢業實習報告
系 別 機械工程學院
專 業 機械設計制造及其自動化
班 級 機092
姓 名 范艷東
學 號 2009307201
指導教師 李常勝
實習成績
實習報告
轉眼間四年的大學生活就快結束了，然而大多數學生對于本專業的認識還是不夠，為了使我們更多地了解機械產品及設備，提高對機械設計制造及其自動化的認識，加深機械在工業各領域應用的感性認識，開闊視野，老師安排了我們到長春會展中心實習。
長春國際會展中心是由市政府和長春經濟技術開發區共同投資興建的大型現代化展覽場所，是集展覽、住宿、餐飲、會議、娛樂、體育、旅游、商貿、科技、信息等為一體的多功能活動中心。
一、實習目的
畢業實習是學生完成了教學計劃所規定的全部理論課程的基礎上進行的總結性實習，是培養和檢驗學生綜合運用所學專業的基本理論、基本技能，理論聯系實際，獨立的分析問題、解決問題的重要環節。實習在于培養實踐動手能力，使所學的專業理論知識與實踐相結合，為更好地適應社會的需求打下良好的基礎。通過到長春國際會展中心的實習，讓我們對各種工程機械，如裝載機、挖掘機、起重機等，以及各種數控機床、精密儀器等有了更進一步的認識和了解。通過參觀，綜合自己所學知識，以及查閱資料，這次實習我學到了不少東西。
二、實習內容
本次畢業實習，我們跟隨畢業設計導師李常勝老師，來到長春國際會展中心，為期一天。
擺在國際會展中心門口的有裝載機，挖掘機，汽車吊車等等，而塔式起重機是我著重了解的對象。
（1）裝載機
裝載機是一種廣泛用于公路、鐵路、建筑、水電、港口、礦山等建設工程的土石方施工機械，它主要用于鏟裝土壤、砂石、石灰、煤炭等散狀物料，也可對礦石、硬土等作輕度鏟挖作業。換裝不同的輔助工作裝置還可進行推土、起重和其他物料如木材的裝卸作業。因此它成為工程建設中土石方施工的主要機種之一。
（2）挖掘機
挖掘機是用鏟斗挖掘高于或低于承機面的物料，并裝入運輸車輛或卸至堆料場的土方機械。其挖掘的物料主要是土壤、煤、泥沙以及經過預松后的土壤和巖石。從近幾年工程機械的發展來看，挖掘機的發展相對較快，挖掘機已經成為工程建設中最主要的工程機械之一。
（3）塔式起重機
塔式起重機又稱塔機，具有適用范圍廣，回轉半徑大，操作方便，工作效率高及安裝拆卸比較簡便等特點，從而廣泛使用在建筑安裝工程中，并成為重要的施工機械之一。
塔機組成一般來說塔機按各部分功能可分為：基礎、塔身、頂升、回轉、起升、平衡臂、起重臂、起重小車、塔 頂、司機室、變幅等部分。塔機安裝在地面上需要基礎部分；塔身是塔機身子，也是升高的部分；頂升部分是使得塔機可以升高；回轉是保持塔機上半身可以水平旋轉的；起升機構用來將重物提升起來的；平衡臂架是保持力矩平衡的；起重臂架一般就是提升重物的受力部分；小車用來安裝滑輪組和鋼繩以及吊鉤的，也是直接受力部分；塔頂當然是用來保持臂架受力平衡的；司機室是操作的地方；變幅是使得小車沿軌道運行的。
塔機工作機構分為5種：起升機構；變幅機構；小車牽引機構；回轉機構和大車走行機構。在此，就讓我們簡單的看一下：動臂式塔機設臂架變幅機構，兼有架設及變幅兩種功能。小車變幅水平臂架塔機設小車牽引機構，或稱小車變幅機構。固定式塔機不設大車走行機構。起升機構、變幅機構及小車牽引機構在構造上極為近似，均由電動機、聯軸器、制動器、減速器和卷筒等部件組成。其具體介紹如下：
起升機構：起升機構是起重機機械的主要機構，用以實現重物的升降運動。起升機構通常由原動機、減速器、卷筒、制動器、鋼絲繩、滑輪組和吊鉤組成。
回轉機構:塔機是靠起重臂回轉來保障其工作覆蓋面的?；剞D(zhuǎn)運動的產生是通過上、下回轉支座分別裝在回轉支承的內外圈上并由回轉機構驅動小齒輪。小齒輪與回轉支承的大齒圈嚙合，帶動回轉上支座相對于下支座運動。我們?cè)O(shè)計的QTZ500塔式起重機的回轉機構設成單回轉式，通常由回轉電動機、液力耦合器、回轉制動器、回轉減速器和小齒輪組成。
變幅機構:變幅機構是實現改變幅度的工作機構，用來擴大起重機的工作范圍，提高起重機的生產率。變幅機構由電動機、減速器、卷筒和制動器組成。功率和外形尺寸較小。變幅機構按其構造和不同的變幅方式分為運行小車式和吊臂俯仰式。
塔機都設有安全保護裝置，包括：起升高度限制器、起重量限制器、力矩限制器。
為了提高塔機生產率，加快吊裝施工進度，無論是起升機構、變幅機構、小車牽引機構、回轉機構和大車走行機構均應具備較高的工作速度，并要求從靜停到全速運行，或從全速運行轉入靜停的全過程(即啟動和制動過程)，都能平緩進行，避免產生急劇沖動，對金屬結構產生破壞性影響。對于高層建筑施工用的自升塔機來說，由于起升高度大，起重臂長，起重量大，對工作機構調速系統有更高的要求。
由于我的畢業設計是塔機的吊臂，通過查閱資料，我了解到：吊臂是塔機的關鍵零件之一，她是由數節臂架通過臂架接頭用銷軸連接在一起的結構式焊接件，其制造質量直接影響塔式起重機的使用安全和壽命，特別是吊臂下弦桿，它既是受力桿件又是小車的軌道。為使小車運行平穩，兩下弦桿必須滿足直線度、平面度、平行度和垂直度等技術要求。因此，吊臂下弦桿接頭的制造質量直接影響整個吊臂的制造質量。
三、實習結果
“紙上得來終覺淺，絕知此事要躬行”，通過這次實習，我學到了很多知識：
（1） 了解了裝載機和挖掘機的用途；
（2） 了解了塔式起重機的特點和結構，并對其工作機構和臂架做了詳細了解，
對我的畢業設計起到了很重要的作用。
四、實習總結
在這短暫的實習過程中，我采用了看、問、查閱資料等方式，對工程機械有了更進一步的認識和了解，我深深的感覺到了自己所學知識的膚淺和在實際運用中專業知識的匱乏，這使我真正領悟到什么叫“學無止境”。實習結束并不代表什么，它讓我發現了更多的不足，所以在今后的學習和工作中，我會更加用心，去充實自己，完善自己，以求知者的身份警戒自己，爭取在今后的工作中做一名合格的員工。
Ocean Engineering 29 (2002) 14631477 Analysis of Wells turbine design parameters by numerical simulation of the OWC performance A. Brito-Melo, L.M.C. Gato * , A.J.N.A. Sarmento Mechanical Engineering Department, Instituto Superior Tecnico, Technical University of Lisbon, Av. Rovisco Pais, 1049-001 Lisbon, Portugal Received 22 May 2001; accepted 30 August 2001 Abstract This paper investigates by numerical simulation the influence of the Wells turbine aerody- namic design on the overall plant performance, as affected by the turbine peak efficiency and the range of flow rates within which the turbine can operate efficiently. The problem of match- ing the turbine to an oscillating water column (OWC) is illustrated by taking the wave climate and the OWC of the Azores power converter. The study was performed using a time-domain mathematical model based on linear water wave theory and on model experiments in a wave tank. Results are presented of numerical simulations considering several aerodynamic designs of the Wells turbine, with and without guide vanes, and with the use of a bypass pressure- relief valve. 2002 Elsevier Science Ltd. All rights reserved. Keywords: Wave energy; Oscillating water column; Equipment; Wells turbine 1. Introduction The Wells turbine has been the most commonly adopted solution to the air-to- electricity energy conversion problem in oscillating water column (OWC) wave energy converters. These essentially consist of a capture pneumatic chamber, open at the bottom front to the incident wave, a turbine and an electrical generator. The incident wave motion excites the oscillation of the internal free surface of the entrained water mass in the pneumatic chamber, which produces a low-pressure reci- * Corresponding author. Tel.: +351-21-841-7411; fax: +351-21-841-7398. E-mail address: lgatohidro1.ist.utl.pt (L.M.C. Gato). 0029-8018/02/$ - see front matter 2002 Elsevier Science Ltd. All rights reserved. PII: S 00 29 -8018(01)00099-3 1464 A. Brito-Melo et al. / Ocean Engineering 29 (2002) 14631477 procating flow that drives the turbine. A few full-scale turbine prototypes have been built and installed in grid-connected power plants in European countries, e.g. the 500 kW Wells monoplane turbine with guide vanes installed in the Island of Pico, Azores (Falcao, 2000), and 2250 kW biplane contrarotating turbine of the LIMPET plant, at Islay, Scotland (Heath et al., 2000). The greatest challenges to designers of equipment for wave energy converters are the intrinsically oscillating nature and the random distribution of the wave energy resource. These features are absent or much less severe in other competing energy technologies. The air turbine in an OWC converter is subject to flow conditions (randomly reciprocating flow), which, with respect to efficiency, are much more demanding than in turbines in almost any other application. The Wells turbine, while reaching only a moderately high peak efficiency as compared with conventional tur- bines, can operate in reciprocating flow without the need of a rectifying valve system. The turbine, on the one hand, is required to extract energy from air whose flow rate, in each of the two directions, oscillates between zero and a maximum value, which in turn has an extremely large variation from wave to wave and with sea conditions. On the other hand, at fixed rotational speed, turbines in general, and Wells turbines in particular, are capable of operating with good efficiency only within a limited range of flow conditions around the peak efficiency point. The power output of Wells turbines is known to be low (or even negative) at small flow rates (the flow rate passes through zero twice in a wave cycle) and it drops sharply for flow rates above a critical value due to aerodynamic losses produced by rotor blade stalling. Therefore, the turbine is expected to perform poorly in very energetic sea-states or whenever violent wave peaks occur. Mounting a bypass pressure-relief valve on the top of the air chamber as proposed in the Azores plant may prevent this problem. The valve is controlled to limit the maximum pressure and suction in the chamber (depending on the turbine rotational speed) to prevent the instantaneous air flow rate through the turbine from exceeding the values above which aerodynamic stalling at the rotor blades would produce a severe fall in power output. Numerical simulations (Brito- Melo et al., 1996; Falcao and Justino, 1999) indicate that a reduction in turbine size and a substantial increase in the annual production of electrical energy might be achieved by the use of a bypass pressure-relief valve. Moreover, recent studies (theoretical and model testing) indicate that blade sections especially designed for Wells turbine rotors can significantly enlarge the range of flow rates within which the turbine operates efficiently and reduce aerodynamic losses under partially stalled flow conditions, in comparison with other blade designs which give a higher peak efficiency within a narrower range of flow rates through the turbine. This raises the question of whether, in view of the total annual produced electrical energy and taking into account the hydrodynamic performance of the OWC device, it is more appropri- ate to select a turbine aerodynamic design which allows an enlarged range of flow rates at which the turbine operates efficiently or whether it is better to adopt a turbine design which gives a higher peak efficiency value with a reduced range of flow rates at which the turbine operates efficiently. Furthermore, it is of interest to know to what extent this issue might be dependent on the use of a pressure-relief valve. The main objective of the present work is to investigate the influence of the Wells 1465A. Brito-Melo et al. / Ocean Engineering 29 (2002) 14631477 turbine aerodynamic design on the overall plant performance, as affected by the turbine peak efficiency and the range of flow rates within which the turbine can operate efficiently. Realistic characteristics are assumed for the turbine and the use of a bypass pressure-relief valve is also considered. Since the resulting pressure changes in the chamber are dependent on the turbine characteristics and the pressure- relief valve influences the turbine operation, the hydrodynamic process of energy extraction is also modified. The hydrodynamics of the conversion of wave energy into pneumatic energy is predicted by using a time-domain mathematical model based on linear water wave theory and on model experiments in a wave tank as described in Sarmento and Brito-Melo (1996). The conversion of pneumatic energy into electrical energy is predicted by a suitable computational model of the power take-off equipment based on the results extrapolated from aerodynamic tests on a scale-model and on empirical approximations for the generator losses (Brito-Melo et al., 1996). This paper presents the results of numerical simulations considering several aerodynamic designs of the Wells turbine, with and without guide vanes, and the use of the pressure-relief valve. The problem of matching the turbine to an OWC is illustrated by taking the wave climate and the OWC of the Azores wave power converter. 2. Wave-to-wire model 2.1. Plant operation The wave-to-wire model concerns the operation of an OWC equipped with a Wells turbine, a bypass valve of unlimited capacity and a variable speed turbo-generator, under a set of representative sea-state conditions. The Wells turbine is known to exhibit an approximately linear relationship between the turbine pressure drop p(t) and the flow rate q t (t). Then we may write the turbine characteristic as K H11005 p(t)/q t (t) H11005 p s (H9024)/q s (H9024), where p s (H9024), and q s (H9024) are maximum values of pressure and flow rate (prior to the onset of aerodynamic stall at the turbine rotor blades), which (for a given turbine) depend on the turbine rotational speed H9024. The use of a properly controlled bypass pressure-relief valve prevents the occurrence of stall at the turbine rotor blades. The valve is controlled to ensure that |p(t)|H11349p s (H9024). Then |q s (t)|H11349q s (H9024). The excess flow rate q v (t) passes through the valve to (or from) the atmosphere. The inertia of the rotating parts is assumed large enough so that rotational speed H9024 may be considered approximately constant over the time-intervals simulating a given sea-state (about 15 minutes). This allows H9024 to be optimized for each represen- tative record of the sea-state, in order to maximize the electrical energy production. The turbine rotational speed is allowed to vary between the synchronous speed of the generator and twice its value. Summing the product of the time-averaged electri- cal power output with the occurrence frequency for all data records gives the overall annual average electrical power output. 1466 A. Brito-Melo et al. / Ocean Engineering 29 (2002) 14631477 2.2. Hydrodynamic model The hydrodynamic model is based on the pressure model presented in Sarmento and Falcao (1985). According to the OWC performance description presented in Section 2.1, the mass balance across a control surface enclosing the pneumatic chamber is given by p(t) K H11001 q v (t) H11005 q(t)H11002 V 0 gP a dp(t) dt (1) where q(t) is the volume flow rate displaced by the free-surface inside the chamber, V 0 denotes the volume of the air in the chamber under undisturbed conditions, P a is the atmospheric pressure and g is the ratio of specific heats. As stated in Section 2.1, q v (t) H11005 0if|p(t)| H11021 p s (H9024) (i.e. when the valve is not operating). According to the linear water wave theory, the volume flow rate displaced by the free-surface inside the chamber may be decomposed as q(t) H11005 q d (t) H11001 q r (t), where q d (t) is the diffraction flow rate, due to incident wave action assuming the internal and the exter- nal free-surfaces at constant atmospheric pressure, and q r (t) is the radiation flow rate due only to the pressure oscillation p(t) in otherwise calm waters. Under the assump- tions of the linearized wave theory, we may apply the convolution theorem to obtain the solution of a linear problem in terms of an impulse response (Pipes and Harvill, 1970), as follows: q r (t) H11005 H20885 H11002H11009 t h r (tH11002t)pH11032(t)dt (2) where pH11032(t) is the time-derivative of the pressure inside the chamber and t represents a time-lag. The upper limit of the integral in Eq. (2) represents the present instant t because the process is causal (Cummins, 1962). The impulse response function h r (t) can be obtained from the hydrodynamic coefficients of the OWC computed with a numerical model, such as the WAMIT (Lee et al., 1996) or the AQUADYN- OWC (Brito-Melo et al., 1999), or by tank testing. Here we use an estimate of the impulse response function obtained in free-oscillation transient experiments from 1:35 scale testing of the Azores OWC wave power plant (see Sarmento and Brito- Melo, 1996, for details). Time series for the diffraction flow, q d (t), have also been obtained in energy extrac- tion experiments with the scaled model subject to a set of 44 sea-states representative of the Azores power plant site. In these experiments a device producing an equivalent air pressure drop simulated the turbine. The flow rate q t (t) could be obtained as a function of p(t) from the device calibration curve. The diffraction flow time-series for each of the 44 sea-states was estimated by solving Eq. (1) (with q v (t) H11005 0) using the pressure records from the energy extraction experiments, and the experimental estimate of h r (t) previously obtained in the transient experiments. 1467A. Brito-Melo et al. / Ocean Engineering 29 (2002) 14631477 2.3. Power take-off equipment The power take-off sub-model is based on results extrapolated from small-scale turbine tests (Gato et al., 1996; Webster and Gato, 1999a,b) and on empirical data for the turbine and generator losses (Brito-Melo et al., 1996). The average power at the turbine shaft for a period T is given by W s H11005 H9024 T H20885 0 T L(H9024,q t (t)H11002L m (H9024) dt (3) where L is the aerodynamically produced turbine-torque and L m the torque due to mechanical losses (especially bearing losses). For stall-free conditions, L is approxi- mated by a second-order polynomial. In order to provide the necessary performance data to study the matching of the power take-off equipment and the pneumatic chamber, the data from small-scale turbine tests are modified using a simple mean- line turbine flow analysis method to take into account the rotor solidity S and the hub-to-tip ratio. Ignoring the postponement of stall when the Reynolds number is increased, scale effects are taken into account by correcting the torque curve of the turbine model. This is done multiplying (dividing) the positive (negative) values of L by f H11005 0.8/0.706. This corrects the torque curve of the unswept NACA 0015 bladed rotor with guide-vanes to match a peak efficiency of h max H11005 0.80. For the preliminary design of the turbine a maximum blade tip speed of 160 ms H110021 is assumed. The average electrical power output is obtained by subtracting the generator losses from the average power at the turbine shaft. The model for the generator losses includes the Joule losses, the iron losses, the ventilation losses and the mechanical losses (Brito-Melo et al., 1996). 3. Results and discussion Experimental research on different types of rotor blades has been conducted recently to improve the aerodynamic performance of the Wells turbine (Raghunathan, 1995; Gato et al., 1996; Curran and Gato, 1997; Webster and Gato, 1999a,b). Among these types, we consider two turbine blade configurations, which may give a wider range of flow rates within which the turbine can operate with fairly good efficiency, in comparison with that of the more standard NACA 0015 unswept bladed turbine rotor: they are the backward-swept NACA 0015 blades (Webster and Gato, 1999a), Fig. 1, and the optimized HSIM-15-262123-1576 unswept blades (Gato and Hen- riques, 1996), Fig. 2. For comparison we take results for the NACA 0015 unswept blades (Gato et al., 1996). Figs. 3 and 4 show experimental results from unidirectional-flow small-scale test- ing at the IST rig (Webster and Gato, 1999a,b). Results presented in Figs. 3 and 4 refer to high-solidity Wells turbine rotors (rotor outer radius R H11005 0.295 m, constant chord c H11005 125 mm, rotor solidity S H11005 0.64, equipped with the blades referred to 1468 A. Brito-Melo et al. / Ocean Engineering 29 (2002) 14631477 Fig. 1. Rotor blade sweep angle. Fig. 2. The NACA 0015 and HSIM 15-262123-1576 sections. above, with and without guide vanes. The figures show, in dimensionless form, experimental results for the efficiency h H11005 LH9024/(q t p), pressure drop p H11005 p/(rH9024 2 R 2 ), and torque L H11005 L/(rH9024 2 R 5 ) as functions of the flow rate coefficient U* (r is the air density). Results in Fig. 3 for the turbines without guide vanes show that the NACA 0015 unswept rotor has h max H11005 0.583 at U H11005 0.114, and stalls at U H11005 0.21. The NACA 0015 30 backward-swept rotor has a lower h max H11005 0.583, with a lower flow rate for the onset of stall, U H11005 0.17, but without exhibiting the sharp decrease in the torque that occurs in the unswept rotor. Furthermore, under stall conditions, the torque of the swept rotor becomes negative at a much higher flow rate, U H11022 0.45, whereas for the unswept blades the efficiency becomes nega- tive for U H11022 0.3. The unswept HSIM bladed rotor shows a h max similar to that of the backward-swept rotor, but produces a soft progressive stall of the flow through the rotor blades, with notably higher efficiency for a wide range of flow rates after the onset of stall. Fig. 4 shows a corresponding plot for the same turbine rotors when equipped with a double row of guide vanes. The experimental results plotted in Fig. 4 show that the use of guide vanes increases h max for any of the above geometries, i.e. from 0.583 to 0.706, 0.551 to 0.613 and 0.553 to 0.669, for the NACA 0015 unswept and 1469A. Brito-Melo et al. / Ocean Engineering 29 (2002) 14631477 Fig. 3. Unswept and 30 backward-swept NACA 0015 and unswept HSIM bladed rotor turbines, without guide vanes: measured values of efficiency (a), pressure drop (b) and torque (c) against flow rate coef- ficient. 1470 A. Brito-Melo et al. / Ocean Engineering 29 (2002) 14631477 Fig. 4. Unswept and 30 backward-swept NACA 0015 and unswept HSIM bladed rotor turbines, with guide vanes: measured values of efficiency (a), pressure drop (b) and torque (c) against flow rate coef- ficient. 1471A. Brito-Melo et al. / Ocean Engineering 29 (2002) 14631477 backward-swept rotors and the HSIM unswept rotor, respectively. Furthermore, we find that the use of guide vanes narrows the range of flow rates within which the turbine works with positive torque. Table 1 summarizes the performance data for the six turbines, where U a and U b are the minimum and maximum flow rate coefficients respectively, at which the efficiency is nominally h H11005 0.5h max . Therefore, H9021H11005U a /U b and H9004H11005U a H11002U b give an indication of the operational range while (H9004p 0 /U ) h H11005 h max is the pressureflow ratio in the approximately rectilinear region. In the above performance comparison, constant overall solidity was assumed for the different turbine configurations. Results in Table 1 show that the rotor blade geometry has a remarkable influence on the turbine performance. In particular, some rotor geometries give a considerable wider range of flow rates within which the turbine operates efficiently, in comparison with others that have higher peak efficiency within a narrower range of flow rates. Figs. 57 plot the average electrical power output as given by the numerical simul- ation for the set of the 44 representative records of the wave climate for the Azores Plant site, taking into account the frequency of occurrence of each sea-state. The results give the turbine characteristic K for several values of the rated power W 0 H11005 p s q s . Table 2 indicates the values of the flow coefficient U s at which the different types of turbine rotor were designed and the bypass pressure-relief valve is actuated. 3.1. NACA 0015 unswept bladed rotor with and without guide vanes Fig. 5 presents the results of the numerical simulation to study the effect of the use of guide vanes with the NACA 0015 unswept bladed rotor. Fig. 5 shows that the use of guide vanes provides a significant increase in the average electrical power output, both with and without the presence of the bypass pressure-relief valve. The curves plotted in Figs. 3 and 4 for the unswept NACA 0015 rotor, with and without guide vanes, respectively, show that the turbine with guide vanes has h max H110150.72 Table 1 Peak efficiency, useful flow rate range and damping ratio for several turbine models (overall solidity S=0.64) Turbine rotor With guide vanes Without guide vanes NACA 0015 NACA 0015 HSIM NACA 0015 NACA 0015 HSIM unswept swept-back unswept unswept swept-back unswept h max 0.706 0.613 0.669 0.583 0.551 0.553 (U ) h H11005h max 0.124 0.137 0.154 0.114 0.129 0.131 U a 0.050 0.062 0.057 0.051 0.058 0.059 U b 0.197 0.209 0.275 0.251 0.232 0.360 H9021 0.254 0.297 0.207 0.203 0.250 0.164 H9004 0.147 0.147 0.218 0.200 0.174 0.301 (H9004p 0 /U ) h H11005h max 2.19 1.87 2.38 2.54 2.04 2.79 1472 A. Brito-Melo et al. / Ocean Engineering 29 (2002) 14631477 Fig. 5. Unswept NACA 0015 bladed rotor turbine with and without guide vanes working (a) with and (b) without the bypass valve: average electrical power conversion as a function of the turbine characteristic K, for several values of the turbine-rated power. whereas for the turbine without guide vanes h max H11021 0.60. Nevertheless, the torque curve for the turbine with