J31-315曲柄壓力機設計(單點、閉式的曲柄壓力機)【含CAD源文件圖紙和PDF圖紙】
資源目錄里展示的全都有預覽可以查看的噢，，下載就有,,請放心下載，原稿可自行編輯修改=【QQ：11970985 可咨詢交流】====================喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改=【QQ：197216396 可咨詢交流】====================
院學生畢業設計（論文）
分院
專業
機械設計制造及其自動化
班級
學生姓名
指導教師
設計（論文）起止日期
教研室主任
題目名稱（包括主要技術參數）及要求
1. 題目名稱：J31-315曲柄壓力機設計
2. 要求：
曲柄壓力機的主要技術參數是反映一臺壓力機的工作能力，所能加工零件的尺寸范圍，以及有關生產效率等指標。J31-315壓力機的各主要參數如下：
（1）公稱壓力 曲柄壓力機的公稱壓力是指滑塊離下死點前某一特定距離或曲柄旋轉到離下死點前某一特定角度時，滑塊上所容許承受的最大作用力。J31-315壓力機的公稱壓力為3150千牛。
（2）滑塊行程 它是指滑塊從上死點到下死點所經歷過的距離，它的大小隨工藝用途和公稱壓力的不同而不同。J31-315壓力機的滑塊行程為315毫米。
（3） 滑塊每分鐘行程次數， 它是指滑塊每分鐘從上死點到下死點，然后再回到上死點所往復的次數。J31-315壓力機的滑塊的行程次數為20次∕分。
論文開題報告（設計方案論證）
應包括以下幾方面的內容：
1、 本課題研究的意義；2、調研（社會調查）情況總結；3、查閱文獻資料情況（列出主要文獻清單）；4、擬采取的研究路線；5、進度安排。
1. 本課題研究的意義：
J31-315曲柄壓力機是先進國家工廠中常用的一種鍛壓設備。用鍛壓工藝替代切削工藝來生產工件具有高效率、質量好、重量輕、成本低的特點，所以，工業先進的國家越來越多地采用鍛壓設備。與工業先進的國家相比，我國的曲柄壓力機制造業還很落后，因此，必須大力發展曲柄壓力機，以滿足我國現代化建設的需要。
2. 調研情況總結：
為了更好的完成本設計，我們參觀了長春第一汽車制造廠，并在網上查閱了大量有關資料，對壓力機的功能、原理及結構有了直觀的了解，對順利完成本設計起到了至關重要的作用。
3. 參考文獻：
[1] 蘇翼林主編《材料力學》(第二冊 上冊) [M] 北京 高等教育出版社 1987年
[2] 濮良貴,紀名剛主編《機械設計》(第七版)[M] 北京 高等教育出版社 2001年
[3] 機械設計書冊編寫組主編《機械設計手冊 [M] 北京 化學工業出版社 1981年
[4] 何德譽主編《曲柄壓力機》（第一版） [M] 北京 機械工業出版社 1981年
[5] 華中工學院編寫組《機械傳動及壓力機》 [M] 北京 人民教育出版社 1999年
[6] 申永勝主編《機械原理教程》（第二版） [M] 北京 清華大學出版社 2005年
4.擬采取的研究路線：
指導老師下達任務→充分理解本課題要解決的問題→查閱文件和素材（圖書館、上網）→翻譯英文資料（達新校區主樓教室）→到長春一汽參觀→撰寫論文（達新校區主樓教室）→CAD繪圖→指導教師審查→修改、完善、定稿→準備答辯。
5．進度安排：
3月 2日—3月 15日 查閱文件，書籍材料。
3月 16日—3月 29日 翻譯英文材料。
3月 30日—4月 26日 寫課題論文，寫初稿。
4月 27日—5月 17日 完善論文，定稿。
5月 18日—6月 7日 繪制設計草圖、打印。
6月 8日—6月 21日 整理，熟悉文件。
指導教師審閱意見：
年 月 日
記事：
教師審閱意見：
年 月 日
畢業設計（論文）任務書
姓名
學號
畢業屆別
專業
機械設計
畢業設計(論文)題目
J31-315曲柄壓力機設計
指導教師
學 歷
職 稱
具體要求：J31-315曲柄壓力機是先進國家工廠中常用的一種鍛壓設備。采用鍛壓工藝生產工件有效率高、質量好、重量輕和成本低的特點。所以，現在工業先進的國家越來越多地采用鍛壓工藝代替切削工藝和其他工藝。必須大力發展曲柄壓力機，以滿足現代工業的需要。隨著工業的發展，曲柄壓力機的品種和數量越來越多，質量越來越高，壓力也越來越大。
J31-315壓力機設計主要內容：
（1） 確定壓力機的技術參數；
（2） 進行傳動系統的方案設計；
（3） 初步確定主要零部件的結構形式及主要尺寸，繪制總裝配草圖和主要草圖；
（4） 核算主要零部件的參數和尺寸；
（5） 繪制零部件圖和總圖。
參考資料：1）《曲柄壓力機》
2）《機械設計手冊》
時間安排：
2019年2月25日-----2019年4月1日 完成開題報告
2019年4月 2 日-----2019年4月12日 完成論文提綱
2019年4月13日-----2019年5月13日 完成論文初稿
2019年5月14日-----2019年6月8日 論文修改、定搞、打印
2019年6月18日-----2019年6月20日 論文答辯
指導教師簽字：
2019年 2 月 25 日
教研室意見：
教研室主任簽字：
年 月 日
題目發出日期
2018.12.28
設計（論文）起止時間
2019.2.25～2019.5.30
附注：
開題報告書
課題名稱
J31-315曲柄壓力機設計
課題來源
課題類型
AY
導 師
學生姓名
學 號
專 業
開題報告內容：
一、 目的及意義：
J31-315曲柄壓力機是先進國家工廠中常用的一種鍛壓設備。用鍛壓工藝替代切削工藝來生產工件具有高效率、質量好、重量輕、成本低的特點，所以，工業先進的國家越來越多地采用鍛壓設備。與工業先進的國家相比，我國的曲柄壓力機制造業還很落后，因此，必須大力發展曲柄壓力機，以滿足我國現代化建設的需要。
二、 研究的主要內容：
（1）確定壓力機的技術參數；
（2）進行傳動系統的方案設計；
（3）初步確定主要零部件的結構形式及主要尺寸，繪制總裝配草圖和主要草圖；
（4）核算主要零部件的參數和尺寸；
（5）繪制零部件圖和總圖。
方法及預期目的：
通過對壓力機數據的分析計算以及查閱相關資料,按照經驗類比的方法來完成壓力機的設計。J31-315是一種單點、閉式的曲柄壓力機，利用電動機帶動皮帶輪轉動，經兩級齒輪減速后，再通過曲柄滑塊機構把旋轉運動轉化為滑塊的上下運動，從而對工件進行鍛造加工。
通過設計方案的對比，傳動系統采用三級傳動的形式，且最后一級用偏心齒輪代替曲軸傳動，傳動系統放在機身內且為上傳動，曲柄軸和傳動軸垂直放置在壓力機的正面，完成了離合器、制動器、偏心齒輪等主要零部件的選用和設計。
指導教師簽名： 日期：
課題類型： （1）A—工程設計；B—技術開發；C—軟件工程；D—理論研究；
（2）X—真實課題；Y—模擬課題；Z—虛擬課題
（1）、（2）均要填，如AY、BX等。
畢業設計(論文)評閱書(1)
姓名
專業
機械設計
畢業設計(論文)題目
J31-315曲柄壓力機設計
指導教師評語：
得分
指導教師簽字：
年 月 日
評閱人評語：
得分
評閱人簽字：
年 月 日
等級
畢業設計(論文)評閱書(2)
姓名
專業
機械設計
畢業設計(論文)題目
J31-315曲柄壓力機設計
答辯小組評語：
等級
組長簽字：
年 月 日
答辯委員會綜合評語：
等級
答辯委員會主任簽字：
年 月 日（學院公章）
注：答辯小組根據評閱人的評閱簽署意見、初步評定成績，交答辯委員會審定，蓋學院公章。
“等級”用優、良、中、及、不及格五級制（可按學院制定的畢業設計(論文)成績評定辦法評定最后成績）。
畢業設計（論文）答辯記錄
姓名
畢業屆別
專業
機械設計
題目
J31-315曲柄壓力機設計
答辯時間
答辯組成員（簽字）：
答辯記錄：
記錄人（簽字）：
年 月 日
答辯小組組長（簽字）：
年 月 日
附注：
J31-315曲柄壓力機設計
摘要
壓力機是工業上一種用來鍛壓的設備，采用鍛壓工藝生產工件具有效率高、質量好、重量輕、成本低的特點。因此，必須大力發展曲柄壓力機，以滿足我國現代化建設的需要。
J31-315是一種單點、閉式的曲柄壓力機。它是利用電動機帶動皮帶輪轉動，經兩級齒輪減速后，再通過曲柄滑塊機構把旋轉運動轉化為滑塊的上下運動，從而對工件進行鍛造加工。在設計中，通過設計方案的對比，傳動系統采用三級傳動的形式，且最后一級用偏心齒輪代替曲軸傳動。完成了皮帶輪 、離合器、制動器、偏心齒輪和軸等主要零部件的選用和設計以及壓力機的機身的設計，并進行了強度與剛度的校核，計算結果表明設計合乎要求。壓力機的運動與停止選用浮動嵌塊式摩擦離合器和制動器來控制。
關鍵詞：曲柄壓力機；曲柄滑塊；鍛壓設備
The design of J31-315 Crank Press
ABSTRACT
The press is used for forging industrial equipment, forging a productive part of a high efficiency, good quality, light weight, low cost features. Therefore, we must vigorously develop the crank presses, to meet the needs of China's modernization drive.
The J31-315 is a single point, closed crank press. It is the use of motor driven pulley rotation, the two gear reducer, and then through the slider-crank mechanism to rotate into a slider up and down movement, thereby forging the workplace for processing. In the design, by contrast design, drive system used in the form of three transmission, and the last one to replace the eccentric crankshaft gear transmission. Completed a pulley, clutch, brakes, gears and eccentric shaft, and other major components of the selection and design of the fuselage and press the design, and the strength and stiffness of the check, the results showed that with the design requirements. The movement and stop of The Press is optional floating inlay block friction clutch and brake to control.
Key words: crank press; crank slide block; the equipment of forging and stamping
目錄
摘要 viii
ABSTRACT ix
緒論………………………………………………………………………………...1
1 J31-315壓力機概述………………………………………………………….2
1.1 J31-315壓力機工作原理及構件……………………………………………2
1.2 J31-315壓力機主要技術參數………………………………………………3
2 J31-315壓力機的方案對比及選擇……………………………………………4
2.1 電動機的選擇………………………………………………………………..4
2.2 傳動系統的對比和設計………………………………………………………7
2.2.1確定滑塊加力點的數目及機構運動分析…………………………………7
2.2.2確定傳動系統的布置方式…………………………………………………9
2.2.3確定傳動比及各傳動比的分配……………………………………………10
2.2.4選擇離合器和制動器的類型………………………………………………11
3 主要零件的設計與校核………………………………………………………14
3.1帶和帶輪設計……………………………………………………………….14
3.2齒輪的設計………………………………………………………………15
3.2.1齒輪概述……………………………………………………………………15
3.2.2一級齒輪傳動的設計………………………………………………………15
3.2.3偏心齒輪的設計……………………………………………………………18
3.3軸的設計…………………………………………………………………21
3.3.1大皮帶輪軸的設計…………………………………………………………21
3.3.2中間軸的設計………………………………………………………………23
3.3.3偏心齒輪軸的設計…………………………………………………………24
3.4滑塊與導軌的設計…………………………………………………………...26
3.5連桿的設計… ………………………………………………………….…..27
3.5.1連桿及裝模高度調節機構…………………………………………………27
3.5.2連桿及調節螺桿的校核……………………………………………………27
3.5.3滑動軸承的校核…………………………………………………………29
4 機身的設計 …………………………………………………………………. 30
4.1 機身的比較和選擇………………………………………………………….30
4.2 機身的強度計算…………………………………………………………….30
4.2.1立柱和拉緊螺栓校核………………………………………………………30
4.2.2上梁的強度校核……………………………………………………………32
4.2.3底座的強度校核……………………………………………………………33
5 輔助裝置的選擇 ……………………………………………………………. 33
5.1 過載保護裝置的選擇……………………………………………………….33
5.2 拉延墊……………………………………………………………………….33
5.3 滑塊平衡裝置……………………………………………………………….33
5.4 潤滑系統…………………………………………………………………….33
總結……………………………………………………………………………….36
謝辭……………………………………………………………………………… 37
參考文獻…………………………………………………………………………38
附錄A 外文翻譯－原文部分…………………………………………………..39
附錄B外文翻譯－譯文部分…………………………………………………..46
9
Procedia Engineering 29 (2012) 1486 14911877-7058 2011 Published by Elsevier Ltd.doi:10.1016/j.proeng.2012.01.160Available online at 2012 International Workshop on Information and Electronics Engineering (IWIEE) An Investigation on the Impact Noise of a Six-Bar Linkage Mechanical Press Yanxin Luoa*, Ruxu Duba State Key Lab of Mechanical Transmission, Chongqing University, Chongqing, 400044, China. b The Institute of Precision Engineering, The Chinese University of Hong Kong, Shatin, N. T., Hong Kong Abstract Conventional mechanical press consisted of crack and slider is one of the most commonly used for stamping. But it cannot satisfy deep drawing operations, in which long dwelling time in the BDC is desirable to avoid crack or wrinkle. This motives the design of a six-bar linkage for the mechanical press. However, the working noise is introduced by the new mechanism. This paper presents a systematics study on the noise of the mechanical press. A combination of noise signature analysis, rigid body dynamics analysis and finite element method (FEM) are adopted to investigate the root cause of the noise. It is found that the noise is caused by the collation of the gears. Finally, an improved design is then proposed and some suggestions are given to reduce the noise. 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of Harbin University of Science and Technology Keywords: Six-bar mechanical press, Signature analysis, Impact noise, Finite element method (FEM) 1. Introduction Conventional mechanical press consisted of crack and slider is one of the most commonly used for stamping. Its trajectory is not controllable at the bottom dead centre (BDC), and hence it cannot satisfy the diverse needs 1. For example, long dwelling time in the BDC is desirable to avoid crack or wrinkle for deep drawing operations 2. This motives the design of the five-, six-, nine- bar linkage for the * Corresponding author. Tel.: +86-23-65106999; fax: +86-23-65105795 E-mail address: 1487Yanxin Luo and Ruxu Du / Procedia Engineering 29 (2012) 1486 1491mechanical press 3, 4. In general, in the design of a mechanical metal forming press, designers concern mostly the kinematics 5. Few have studied the dynamics of the press, though it is very important its performance 6. When a commercial press is designed and built, its necessary to investigate its performance and make continuous improvements. In this research, a six-bar linkage (including a four-bar linkage and a crank-slider mechanism) has been adopted to build a commercial mechanical press with the capability of max loading of 300ton. Design engineers had carefully checked the kinematics of the press and the manufacturing and assemblies were done within the design specification and therefore the press works fine. Though, the press generates loud noise with and without loading. The sound intensity is higher than 90db, which causes various concerns, such as the reliability of the machine and the safety of the operator. The mechanism of the driveline is illustrated in Fig. 1 (a), and its CAD model is shown in Figure 1(b). It consists of seven parts: a motor (not shown in the figure) that connects to the flywheel through the high speed shaft, a reduction gear set (which includes the high speed gear and the low speed gear), a coupler that controls the engagement of the gear set and the crank, a crank-slider mechanism, and a four bar mechanism that connects to the slider. Among them, the four bar mechanism is the key as it doctrines the dynamic performance of the press. L1=45mm L2= 165mm L3=208mm L4= 260mm L5=80010000mm e=80mmFig. 1. (a) Illustration of the six-bar linkage mechanism; (b) the physical model of the mechanism This paper aims to find the root cause(s) of the noise. The presented research will investigate the noise from various aspects and provide improvement solutions. The rest of this paper is organized as follows. The signature analysis of noise is presented in Section 2. In Section 3, the dynamics of the system is studied by rigid-body dynamics analysis and FEM. In Section 4, an improved design is proposed to reduce the impact noise. Finally, conclusions are given in Section 5. 2. Signature analysis of noise signal 2.1. Experimental setup As mentioned earlier, the noise is the major concern of the design. The first step is to analyze the noise signal. The sound signal was measured using a microphone placed closely to the press. Figure 2 shows the experimental setup, the main apparatuses include a microphone (Manufacturer: Brel & Kjr, Model: Type 4191), a signal amplifier (Behringer, Model: XENYX802), a signal acquisition system (a sound card) and a PC computer. The frequency range of the microphone is 3.15 Hz 40 KHz.1488 Yanxin Luo and Ruxu Du / Procedia Engineering 29 (2012) 1486 1491Fig. 2. Experimental Setup 2.2. Noise signal and signature analysis During the experiment, the operating speed of the press is set at 100 stroke per minute (SPM) (thus, the operating frequency is 1.67 Hz), no loading was applied and the sampling frequency was 48 KHz. Fig. 3(a) shows a typical noise signal. Fig. 3(b) is a zoom-in of three cycles, from which it is seen that each period consists of two large peaks, A and B. 00.20.40.60.811.21.41.61.82-1-0.500.51Time /s0500100015002000250005001000150020002500Frequency /HzAmplitude781Hz1255Hz157HzFig.3. A typical noise signal Fig. 4. Spectrum of the noise signal 010203040506070809010002004006008001000Frequency /HzAmplitude23HzFig. 5. Envelope spectrum of the noise signal Fig. 6. Energy-time-frequency spectrum of the noise signal Fig. 4 shows the FFT spectrum of the signal in Fig. 3. From the figure, it is seen that the noise signal has three main components at 157 Hz, 781 Hz and 1,255 Hz respectively. The component at 157 Hz iscorrespondent to the gear meshing frequency and its energy is rather small. The component at the 781 Hz has the largest amplitude and is responsible for the noise. It will be the focus of the study. Fig. 5 shows the envelope spectrum. From the figure, it is seen that the main frequency is at 23 Hz,which is the occurring frequency of the peaks. This indicates that the noise is caused by a series of ABABAB1489Yanxin Luo and Ruxu Du / Procedia Engineering 29 (2012) 1486 1491impacts in each working cycle. Fig. 6 shows the time-frequency spectrum of the signal. From the figure, it is seen that along the 781 Hz a series of peaks appear, and their amplitudes changes from time to time. However, there are mainly two high peak (corresponding to Peaks A and B in Fig. 3) appeared in each period. Moreover, the amplitude of Peak A is larger that of Peak B. Based on the study above, it can be seen that (a) there are two large impacts in each cycle corresponding to A and B respectively, (b) the main frequency of the noise is 780 Hz; and (c) the impact frequency is 23 Hz. It is necessary to analyze the dynamics of the drive system to find the root cause of the noise. 3. Dynamics analysis 3.1. Impact force analysis To investigate the sources of the noise, the dynamic model of the system is necessary for further investigation of mechanical, which may reflect real working conditions, should be constructed for an accurate loading analysis. In this research, the dynamic analysis of the press is carried using a commercial software system RecurDyn. All joint force between the linkages are obtained by this simulation, among which the contact force between the gears is attracted our interesting. Fig. 7 shows the contact force (in black) between the gears, and its differentiation (in orange). Examining the differentiation of the force, it is seen that the contact force quickly changes its direction twice, in A and B, when the punch is moving up. This is very likely to create two big shocks. Consequently, a loud noise will be generated. Differetiation (N/s)Punch position (mm)Gear Force(N)Fig.7. Impact force between the gears In order to further investigate the frequency components in the noise signal, though, Finite Element Analysis (FEA) is necessary. 3.2. Natural frequencies of the mechanical components Its well known that the vibration is usually caused by the vibration of structure, and therefore, its necessary to find the natural frequency of the structure. The analytical method can be used to find the natural frequency. However, it is not precise because of the assumptions. In practical, FEA is a variable method to find the precisely solution of differential equations for verifying the vibration of a structure. There is some commercial software for FEA such as Abaqus, Ansys, Nastran, and etc7, 8. In this research, we used Abaqus to find the natural frequencies of the mechanical components as shown in Table 1. Also, the first mode shape of the high speed shaft is torsion, which is in the same direction of the torque. It is believed that this mode is responsible for repetitive frequency of 23 Hz. And the fourth ABBA1490 Yanxin Luo and Ruxu Du / Procedia Engineering 29 (2012) 1486 1491natural frequency of high speed gear and the second natural of low speed gear are close to the mainly frequency of the noise. Moreover, the corresponding mode shape is bending of the gear tooth. Therefore, the gear tooth should be further investigated. Fig. 8(a) shows the FEA model of the low speed gear. The loading is applied to one of the teeth. The applied loading is a normalized force of 1 unit, in the frequency range from 1 Hz to 1,500 Hz. Fig. 8(b) shows results of the frequency response. From the figure, it is seen that the gear has three main frequencies at 480Hz, 740Hz, and 1,350 Hz respectively. The largest frequency component is at 740 Hz. It is believe that this frequency is responsible for the loud noise. The discrepancies between the FEA frequency (740 Hz) and actual noise frequency (780 Hz) may be attributed to the simplification of the FEA model. In conclusions, we believe the loud noise is generated by the collision of the gears, and the noise can be reduced by eliminating of the gear clearance. Table 1. Modal frequencies of the main components of the press (Hz) Fig. 8 (a) FEM model of the gear pinion (b) frequency response 4. An improved design Based on the analysis result presented earlier, the length of the linkages should not be change as to keep the trajectory of the design. Also, the inertia of the flywheel and the stiffness of the high speed shaft etc., can also be fine-tuned to reduce the noise. However, these solution is not effective because of the mechanical components has small room for improving the design due to the strength constraints. Its an option to improve the design by eliminating the clearance between the gears. The proposed design is shown in Fig. 9. There are two gears mounted on the high speed shaft to eliminate the gear clearance. In this design, two set of gear pair are utilized and one spiral spring will mounted between the gears to eliminate the gear clearance. The first set of gear pair will transmit the torque to the crank shaft for the case of the torque is in clockwise direction. When the torque changes its direction, the second set of gear pair works. Therefore, its believed that the design will reduce the noise effectively. However, the dynamics analysis is needed for the new design model in the future. Mode 1st 2nd 3rd 4th 5th 6th High speed shaft 24.2 29.7 54.8 285.3 581.0 1035.4 High speed gear 67.3 360.5 466.1 753.0 892.9 1189.0 Low speed gear 593.1 619.0 1147.8 1205.3 1278.0 1477.0 Upper linkage 67.0 74.7 80.5 102.6 185.2 282.4 1491Yanxin Luo and Ruxu Du / Procedia Engineering 29 (2012) 1486 1491Fig. 9. An improved design of the gear pair for eliminating the gear clearance 5. Conclusions This paper presents a study on the noise of a six-bar mechanical press. Based on the discussions above, following conclusions can be drawn: The mechanical noise of the press contains a number of components corresponding to the natural frequencies of various components of the press. The noise is generated when the impact occurs. The impact is a result of the four bar mechanism that generates variable speed during the operation. The variable speed generates variable force, causing the gears impact on each other. Its an option to avoid the clearance between the gear pairs to reduce the noise. The combination of the signature analysis, mechanical dynamics analysis and FEM is effective method to analyze the root cause of machine faults. In addition to the application presented above, it can be used for many other applications that involve mechanical motion. Acknowledgements This research is partially supported by the Natural Science Foundation Project of CD CSTC (Grant No. 2011BB0051). References 1 Du R, Guo WZ. The Design of a new metal forming press with controllable mechanism. J Mech Design 2003; 125: 582-592,. 2 Yan HS, Chen WR. A variable input speed approach for improving the output motion characteristics of watt-type presses. Int J Mach Tool Manuf 2000; 40: 675690. 3 Tso PL, Liang KC. A nine-bar linkage for mechanical forming presses. J Mach Tool Manuf 2002; 42: 139-145. 4 Meng CF, Zhang C, Lu YH, Shen ZG. Optimal design and control of a novel press with an extra motor. Mech Mach Theory 2004; 39: 11818. 5 He K, Li WM, Du R. Dynamic modelling with kineto-static method and experiment validation of a novel controllable mechanical metal forming press. Int J Manuf Research 2006; 1: 354-378. 6 Su S, Du R. Signature analysis of mechanical watch movements. Mech System Signal Process 2007; 21:3189-3200. 7 Khelladi S, Kouidri S, Bakir F, Rey R. Predicting tonal noise from a high rotational speed centrifugal fan. J Sound Vibration2008; 313:113-133 8 Junhong Z, Jun H. CAE process to simulate and optimise engine noise and vibration. Mech System Signal Process 2006; 20:1400-1409.
收藏