購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。。【注】：dwg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
Fundamentals of Machine Tools
In many cases products from the primary forming processes must undergo further refinements in size and surface finish to meet their design specifications.To meet such precise tolerance the removal of small amounts of material is needed.Usually machine tools are used for such operation.
In the United States material removal is a big business—in excess of ＄36×109 per year,including material,labor,overhead,and machine-tools shipments,is spent.Since 60 percent of the machanical and industrial engineering and technology graduate have something connection with the machining industry either through sale,design,or operation of machine shops,or working in related industry,it is wise for an engineering student to devote some time in his curriculum to studying material removal and machine tools.
A machine tool provide the means for cutting tools to shape a workpiece to required dimensions;the machine supports the tool and the workpiece in a controlled relationship through the functioning of its basic members,which are as follows:
(a)Bed,Structure or Frame.This is the main member which provides a basis for,and a connection between,the spindles and slides;the distorion and vibration under load must be kept to a minimum.
(b)Slides and Slideways.The translation of a machine element(e.g. the slide) is normally achieved by straight-line motion under the constraint of accurate guiding surface(the slideways).
(c)Spindles and Bearings.Angular displacement take place about an axis of rotation;the position of this axis must be constant within extremely fine limits in machine tools,and is ensured by the provision of precision spindles and bearings.
(d)Power Unit.The electric motor is the universally adopted power unit for machine tools.By suitably positioning individual motors,belt and gear transmissions and reduced to a minimum.
(e)Transmission Linkage.Linkage is the general term used to denote the mechanical,hydraulic,pneumatic or electric mechanisms which connect angular and linear displacements in defined relationship.
There are two broad divisions of machining operations:
(a)Roughing,for which the metal removal rate,and consequently the cutting force,is high,but the required dimensional accuracy relatively low.
(b)Finishing,for which the metal removal rate,and consequently the cutting force,is low,but the required dimensional accuracy and surface finish relatively high.
It follows that static loads and dynamic loads,such as result from an unbalanced grindingwheel,are rmore significant in finishing operations than in roughing operations.The degree of precision achieved in any machining process will usually be influenced by the magnitude of the deflections,which occur as a result of the force acting.
Machine tool frames are generally made in cast iron,although some may be steel casting or mild-steel fabrications.Cast iron is chosen because of its cheapness,rigidity,compressive strength and capacity for damping the vibrations set-up in machine operations.To avoid massive sections in castings,carefully designed systems of ribbing are used to offer the maximum resistance to bending and torsional stresses.Two basic types of ribbing are box and diagonal.The box formation is convenient to produce,apertures in walls permitting the positioning and extraction of cores.Diagonal ribbing provides greater torsional stiffness and yet permits swarf to fall between the sections;it is frequently used for lathe beds.
The slides and slideways of a machine tool locate and guide members which move relative to each other,usually changing the position of the tool relative to the workpiece.The movement genenally takes the forms of translation in a straight line,but is sometimes angulai rotation,e.g. tilting the wheel-head of a universal thread-grinding machine to an angle corresponding with the helix angle of the workpiece thread.The basic geometric elements of slides are flat,vee,dovetail and cylinder.These elements may be used separately or combined in various ways according to the applications.Features of slideways are as follows:
(a)Accuracy of Movement.Where a slide is to be displaced in a straight line,this line must lie in two mutually perpendicular planes and there must be no slide rotation.The general tolerance for straightness of machine tool slideways is 0—0.02mm per 1000mm;on horizontal surfaces this tolerance may be disposed so that a convex surface results,thus countering the effect of “sag”of the slideway.
(b)Means of Adjustment.To facilitate assembly,maintain accuracy and eliminate “play” between slideing members after wear has taken place,a strip is something inserted in the slides.This is called a gib-strip.Usually,the grib is retained by socket-head screw passing through elongated slots;and is adjusted by grub-screws secured by lock nuts.
(c)Lubrication.Slideways may be lubricated by either of the following systems:
1)Intermittently through grease or oil nipples,a method suitable where movements are infrequent and speed low.
2)Continuously,e.g. by pumping through a metering value and pipe-work to the point of application;the film of oil introduced between surfaces by these means must be extremely thin to avoid the slide “floating”.If sliding surfaces were optically flat oil would be squeezed out,resulting in the surfaces sticking.Hence in practice slide surfaces are either ground using the edge of a cup wheel,or scraped.Both processes produce minute surface depresssions,which retain “pocket” of oil,and complete separation of the parts may not occur at all points;positive location of the slides is thus retained.
(d)Protection.To maintain slideways in good order,the following conditions must be met:
1)Ingress of foreign matter,e.g. swarf,must be prevented.Where this is no possible,it is desirable to have a form of slideway,which does not retain swarf,e.g. the inverted vee.
2)Lubricating oil must be retained.The adhensive property of oil for use on vertical or inclined slide surface is important;oils are available which have been specially developed for this purpose.The adhesiveness of oil also prevents it being washed away by cutting fluids.
3)Accidental damage must be prevented by protective guards.
A machine tool performs three major functions:1)it rigidly supports the workpiece or its holder and the cutting tool; 2)it provides relative motion between the workpiece and the cutting tool; 3)it provides a range of feeds and speeds.Machines used to remove metal in the form of chips are classified in four general groups:those using single-point tools,those using multipoint tools,those using random-point tools(abrasive),and those that considered special.
Machines using basically the single-point cutting tools include:1)engine lathes, 2)turret lathes , 3)tracing and duplicating lathes, 4)single-spindle automatic lathes, 5)multi-single automatic lathes , 6)shapers and planers, 7)boring machines.
Machines using multipoint cutting tools include:1)drilling machines, 2)milling machines, 3)broaching machines, 4)sawing machines, 5)gear-cutting machines.
Machines using random-point cutting tools include:1)cylindrical grinder, 2)centreless grinders, 3)surface grinders.Special metal removal methods include:1)chemical milling, 2)electrical discharge machining, 3)ultrasonic machining.
The lathe removes material by rotating the workpiece against a cutter to produce external or internal cylindrical or conical surfaces.It is also commonly used for the production of flat surfaces by faing,in which the workpiece is rotated while the cutting tool is moved perpendicularly to the axis of rotation.
The engine lathe is the basic turning machine from which other turning machines have been developed.The drive motor is located in the base and drives the spindle through a combination of belts and gears,which provides the spindle speeds from 25 to 1500 rpm.The spindle is a sturdy hollow shaft,mounted between heavy-duty bearings,with the forward end used for mounting a drive plate to impart positive motion to the workpiece.The drive plate may be fastened to the spindle by threads,by a cam lock mechanism,or by a thread collar and key.
The lathe bed is cast iron and provides accurately ground sliding surfaces(way)on which the carriage rides.The lathe carriage is a H-shaped casting on which the cutting tool is mounted in a tool holder.The apron hangs from the front of the carriage and contains the driving gears that move the tool and carriage along or across the way to provide the desired tool motion.
A compound rest,located above the carriage provides for rotation of the tool holder through any desired angle.A hand wheel and feed screw are provided with a hand wheel and feed screw for moving the compound rest perpendicular to the lathe way.A gear train in the apron provides power feed for the carriage both along and across the way.The feed box contains gears to impart motion to the carriage and control the rate at which the tool moves relative to the workpiece.On a typical lathe feeds range from 0.002 to 0.160 in. per revolution of the spindle,in about 50 steps.Since the transmission in the feed box is driven from the spindle gears,the feeds are directly related to the spindle speed.The feed box gearing is also used in thread cutting and provides from 4 to 224 threads per in.
The connecting shaft between the feed box and the lathe apron are the feed rod and the lead screw.Many lathe manufacturers combine these two rods in one,a practice that reduces the cost of the machine at the expense of accuracy.The feed rod is used to provide tool motion essential for accurate workpiece and good surface finishes.The lead screw is used to provide the accurate lead necessary for the thread cutting.The feed rod is driven through a friction clutch that allows slippage in case the tool is overloaded.This safety device is not provided in the lead screw,since thread cutting cannot tolerate slippage.Since the full depth of the thread is seldom cut in one pass,a chasing dial is provided to realign the tool for subsequent passes.
The lathe tailtock is fitted with an accurate spindle that has a tapered hole for mounting drills,drill chucks,reamers,and lathe centers.The tailstock can be moved along the lathe ways to accommodate various lengths of workpieces as well as to advance a tool into contact with the worpiece.The tailstock can be offset relative to the lathe ways to cut tapers or conical surfaces.
The turret lathe is basically an engine lathe with certain additional features to provide for semiautomatic operation and to reduce the opportunity for human error.The carriage of the turret lathe is provided with T-slots for mounting a tool-holding device on both sides of the lathe ways with tools properly set for cutting when rotated into position.The carriage is also equipped with automatic stops that control the tool travel and provide good reproduction of cuts.The tailstock of the turret lathe is of hexagonal design,in which six tools can be mounted.Althogh a large amount of time is consumed in setting up the tools and stops for operation,the turret lathe,once set,can continue to duplicate operations with a minimum of operator skill until the tools become dulled and need replacing.Thus,the turret lathe is economically feasible only for production work,where the amount of time necessary to prepare the machine for operation is justifiable in terms of the number of part to be made.
Tracing and duplicating lathes are equipped with a duplicating device to automatically control the longitudinal and cross feed motions of the single-point cutting tool and provide a finished part of required shape and size in one or two passes of the tools.
The single-spindle automatic lathe uses a vertical turret as well as two cross slids.The work is fed through the machine spindle into the chuck,and the tools are operated automatically by cams.
The multispindle automatic lathe is provided with four,five,six,or eight spindles,with one workpiece mounted in each spindle.The spindles index around a central shaft,with the main tools slide accessible to all spindles.Each spindle position is provided with a side tool-slide operated independently.Since all of the slides are operated by cams,the preparation of this machine may take several days,and a production run of at least 5000 parts is needed to justify its use.The principal advantage of this machine is that all tools work simultaneously,and one operator can handle several machines.For relatively simple parts,multispindle automatic lathes can turn out finished products at the rate of 1 every 5 sec.
A shapers utilizes a single-point tool in a tool holder mounted on the end of the ram.Cutting is generally done on the forward stroke.The tool is lifted slightly by the clapper box to prevent excessive drag across the work,which is fed under the tool during the return stroke in preparation for the next cut.The column house the operating mechanisms of the shaper and also serves as a mounting unit for the work-supporting table.The table can be moved in two directions mutually perpendicular to the ram.The tool slide is used to control the depth of the cut and is manually fed.It can be rotated through 90 deg. On either side of its normal vertical position,which allows feeding the tool at an angle to the surface of the table.
Two types of the driving mechanisms for shapers are a modified Whitworth quick-return mechanism and a hydraulic drive.For the Whitworth mechanism,the motor drives the bull gear,which drives a crank arm with an adjustable crank pin to control the length of the stroke.As the bull gear rotates,the rocker arm is forced to reciprocate,imparting this motion to the shaper ram.
The motor on a hydraulic shaper is used only to drive the hydraulic pump.The remainder of the shaper motions are controlled by the direction of the flow of the hydraulic oil.The cutting stroke of the mechanically driven shaper uses 220 deg. of rotation of the bull gear,while the return stroke uses 140 deg..This gives a cutting stroke to return stroke ratio of 1.6 to 1.The velocity diagram shows that the velocity of the tool during the cutting stroke is never constant,while the velocity diagram for a hydraulic shaper shows that for most of the cutting stroke the cutting speed is constant.The hydraulic shaper has an added advantage of infinitely variable cutting speeds.The principal disadvantage of this type of machine is the lack of a definite limit at the end of the ram stroke,which may allow a few thousandths of an inch variation in stroke length.
A duplicating device that makes possible the reproduction of contours from a sheet-metal template is available.The sheet metal template is used in conjunction with hydraulic control.
Upright drilling machines or drill presses are available in a variety of sizes and types,and are equipped with a sufficient range of spindle speeds and automatic feeds to fit the needs of most industries.Speed ranges on a typical machine are from 76 to 2025 rpm.,with drill feed from 0.002 to 0.20 in. per revolution of the spindle.
Radial drilling machines are used to drill workpieces that are too large or cumbersome to conveniently move.The spindle with the speed and feed changing mechanism is mounted on the radial arm;by combing the movement of the radial arm around column and the movement of the spindle assembly along the arm,it is possible to align the spindle and the drill to any position within reach of the machine.For work that is too large to conveniently support on the base,the spindle assembly can be swung out over the floor and the workpiece set on the floor beside the machine.
Plain radial drilling machine provide only for vertical movement of the spindle;universal machines allow the spindle to swive about an axis normal to the radial arm and the radial arm to rotate about a horizontal axis,thus permitting drilling at any angle.
A mutispindle drilling machine has one or more heads that drive the spindles through universal joints and telescoping splined shafts.All spindles are usually driven by the same motor and fed simultaneously to drill the desired number of holes.In most machines each spindle is held in an adjustable plate so that it can be moved relative to the others.The area covered by adjacent spindles overlap so that the machine can be set to drill holes at any location within its range.
The milling operation involves metal removal with a rotating cutter.It includes removal of metal from the surface of a workspiece,enlarging holes,and form cutting,such as threads and gear teeth.
Within an knee and column type of milling machine the column is the main supporting member for the other components,and includes the base cotaining the drive motor,the spindle,and the cutter.The cutter is mounted on an arbor held in the spindle,and supported on its outer extremity by a bearing in the overarm.The knee is held on the column in dovetail slots,the saddle is fastened to the knee in dovetail slots,and the table is attached to the saddle.Thus,the build-up of the knee and column machine provide three motions relative to the cutter.A four motion may be provided by swiveling the table around a vertical axis provided on the saddle.
Fixed-bed milling machines are designed to provide more rigidity than the knee and column type.The table is mounted directly on the machine base,which provides the rigidity necessary for absorbing heavy cutting load,and allows only longitudinal motion to the table.Vertical motion is obtained by moving the entire cutting head.
Tracer milling is characterized by coordinated or synchronized movements of either the paths of the cutter and tracing elements,or the paths of the workpiece and model.In a typical tracer mill the tracing finger follow the shape of the master pattern,and the cutter heads duplicate the tracer motion.
6