購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。。【注】：dwg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
焊片沖壓成形工藝及模具設計
摘 要
本設計題目為焊片沖壓模具設計，體現了沖壓零件的設計要求、內容及方向，有一定的設計意義。通過對該零件模具的設計，進一步加強了設計者沖壓模設計的基礎知識，為設計更復雜的沖壓模具做好了鋪墊和吸取了更深刻的經驗。
本設計運用沖壓工藝及模具設計的基礎知識，首先分析了沖壓件的尺寸及性能要求，為選取模具結構形式做好了準備；然后確定排樣的方式；確定模具的設計參數、設計要點及推出裝置的選?。桓鶕?jù)前面計算出來的沖壓力選取沖壓機床。
該零件形狀簡單、對稱。是由圓弧和直線組成的，沖裁件內外形所能達到的經濟精度為IT12~IT13。孔中心與邊緣距離尺寸公差為±0.5。將以上精度與零件的精度要求相以較比，可以為該零件的精度要求能夠在沖裁加工中得到保證，其他尺寸標注，生產批量等情況，也均符合沖裁的工藝要求，故決定采用沖壓方式進行加工該零件的圓角半徑R=0.6≥0.18t=0.18×0.7=0.175符合要求。
關鍵詞：沖壓模具、推出裝置、生產批量
Die welding sheet forming process and die design
Abstract
The topic for the solder-chip design stamping die design, stamping parts reflects the design requirements, content and direction of the design of a certain significance. Parts of the mold through the design, designers have further strengthened the basis for stamping die design knowledge, for the design of more complex stamping die to do a good job of paving the way and draw a more profound experience.
The design of the use of stamping process and die design of the basic knowledge, the first analysis of the size of stamping parts and performance requirements, in order to select the form of die structure ready; and then ranked to determine the kind of way; determine the mold design parameters, design features and the introduction of device selection; calculated in accordance with the red in front of select pressure punching machine.
The shape of the parts is simple, symmetrical. Is formed by the arc and a straight line, and blanking pieces can form within the economic reach an accuracy of IT12 ~ IT13. Center hole size and edge distance tolerance for ± 0.5. The above parts precision and accuracy requirements in order to per pound, you can request for the accuracy of parts in the stamping process can be assured that other dimension, such as production volume, but also are in line with the blanking of the technological requirements, it decided to adopt punching means for processing the parts of the fillet radius R = 0.6 ≥ 0.18t = 0.18 × 0.7 = 0.175 to meet the requirements.
Keywords: stamping die, the introduction of devices, the production of bulk
2