隔板零件沖壓成形工藝及模具設計【說明書+CAD】
購買設計請充值后下載,,資源目錄下的文件所見即所得,都可以點開預覽,,資料完整,充值下載可得到資源目錄里的所有文件。。。【注】:dwg后綴為CAD圖紙,doc,docx為WORD文檔,原稿無水印,可編輯。。。具體請見文件預覽,有不明白之處,可咨詢QQ:12401814
(畢業設計/論文題目) 摘要 在對隔板零件進行工藝分析后,得到該隔板零件的工藝方和相關的尺寸。通過查相應的手冊確定該模具的總體結構及相應的工作零件案為沖孔、落料級進模。應用CAD、Pro/E等模具設計軟件確定毛坯的幾何形狀、各個標準件的結構尺寸,同時也確定了模具工作零件的材料及加工藝方法。從而完成了該模具的設計。 關鍵詞:隔板零件、工藝分析、相應手冊、沖孔落料級進模、毛坯幾何形狀 The part of the baffle is cold to press the mould Abstract After carrying on the craft and analysing to the part of the baffle, get the craft sides of this baffle of parts and relevant size. Confirm through checking the corresponding manual that ensemble architecture and corresponding job part case of this mould enter the mould in order to wash holes , blanking grade. Use mold design software , such as CAD , Pro/E ,etc. to confirm the geometry form of the blank , physical dimension of each standard component , confirm mould work the material of the part and process the skill method too at the same time. Thus finished the design of this mould . Keyword: the corresponding manual , Analyse, washing the hole blanking grade and entering the mould , blank geometry form in part of the baffle , craft隔板零件沖壓成形工藝及模具設計【說明書CAD】.zip |
隔板零件沖壓成形工藝及模具設計【說明書+CAD】 |
隔板零件沖壓成形工藝及模具設計.doc---(點擊預覽) |
論文封皮.doc---(點擊預覽) |
目錄.doc---(點擊預覽) |
摘要.doc---(點擊預覽) |
開題報告.doc---(點擊預覽) |
工藝卡.doc---(點擊預覽) |
圖紙合集.dwg---(點擊預覽) |
任務書.doc---(點擊預覽) |
中期檢查表 .doc---(點擊預覽) |
A4-落料凸模.dwg---(點擊預覽) |
A4-墊板.dwg---(點擊預覽) |
A4-卸料板.dwg---(點擊預覽) |
A4-凹模.dwg---(點擊預覽) |
A4-凸模固定板.dwg---(點擊預覽) |
A4-沖孔凸模.dwg---(點擊預覽) |
A1-裝配圖.dwg---(點擊預覽) |
翻譯 |
壓縮包目錄 | 預覽區 |
|
請點擊導航文件預覽
|
積分
- 關 鍵 詞:
- 說明書+CAD 隔板 零件 沖壓 成形 工藝 模具設計 說明書 仿單 cad
- 資源描述:
-
購買設計請充值后下載,,資源目錄下的文件所見即所得,都可以點開預覽,,資料完整,充值下載可得到資源目錄里的所有文件。。?!咀ⅰ浚篸wg后綴為CAD圖紙,doc,docx為WORD文檔,原稿無水印,可編輯。。。具體請見文件預覽,有不明白之處,可咨詢QQ:12401814
展開閱讀全文
鏈接地址:http://appdesigncorp.com/p-12253401.html