尾座體加工工藝及夾具設計
39頁 9900字數+論文說明書+任務書+6張CAD圖紙【詳情如下】
任務書.doc
刨肖夾具裝配圖.dwg
外文翻譯--分布式機床的設計.doc
夾具零件圖.dwg
尾座體加工工藝及夾具設計論文.doc
尾座體零件圖.dwg
工序卡.doc
底面刨夾具夾具圖.dwg
機床尾座體的加工與設計開題報告.doc
14孔夾具裝配圖.dwg
17孔夾具裝配圖.dwg
摘 要
本課題主要是設計某機床尾座體的加工工藝及夾具的設計，在設計中采用先設計該尾座體的加工工藝在根據加工工藝來選取夾具的設計的方案和夾具的具體設計；而設計的重點是夾具的設計。由于工件的孔17和14都要以底面做為基準加工，故首先得做出底面的加工夾具。由于孔17的精度要求高，和定位尺寸誤差小，為保證孔的位置和加工準確性我們一定在加工底面的時間通過畫線找出底面的加工余量。這樣就可以更好的保證孔17的位置和加工精度！加工孔14的夾具其實就是在加工底面夾具的基礎上加了一個45度斜度板。加工孔17的時間為保證相對于A和B面的平行度我們就得要準確的設計出以A和B面定為的夾具！還考慮到工件的圓度和圓柱度的誤差小，我們設計的夾具就具有對孔17的夾具定位準確，和加工時間的震動小，那就得在孔17的附近找個定位加緊點！
關鍵詞 加工工藝，夾具，尾座體，設計
ABSTRACT
This topic is mainly design that designs the tail a body of some tool machine to process the craft and tongses, adopting to design first in the design a body of that tail processes the craft at according to process the craft to select by examinations the tongs of the project of the design and concrete design of the tongs;But the point of design is the design of the tongs.Because the bore of the work piece 17 and 14 all want to face to be used as the basis to process with the bottom, past have to do a bottom to face first of process the tongs.Because bore 17 of accuracy have high request, and position the size error margin small, for guarantee the position of the bore and process the accuracy we certainly at process the bottom to face of time pass to draw the line to find out the bottom to face of process the amount of remaining.Thus can with better assurance bore 17 of position and process the accuracy!Process the bore 14 of tongs was in processing the foundation that the bottom faces the furniture to add one 45 degrees of gradient plank in fact.Process the bore 17 of time is opposite for assurance to run parallel with B face of in the A we have to design accurately with the AN and B faces to settle for of tongs!Return in consideration of a degree of the work piece and the error margin of the cylinder degrees are small, the furniture that we design have to the bore 17 of tongs fixed position is accurate, and process the vibration of time small, that have to in the bore 17 of neighborhood seek a fixed position to step up the point!
Keyword process the craft, tongs, a body of tail, design
目 錄
摘 要……………………………………………………………………Ⅰ
ABSTRACT………………………………………………………………Ⅱ
1緒論……………………………………………………………………1
2零件分析 ……………………………………………………………2
2.1零件的特點……………………………………………………………2
2.2工藝分析………………………………………………………………2
3工藝規程設計…………………………………………………………4
3.1確定毛坯的制造形成……………………………………………………4
3.2基面的選擇……………………………………………………………4
3.3制定工藝路線…………………………………………………………4
3.4機械加工余量、工序尺寸及毛坯的確定……………………………8
3.5確定切削用量及基本工時………………………………………………12
4夾具設計 ……………………………………………………………28
4.1問題的提出…………………………………………………………28
4.2夾具設計 …………………………………………………………28
總結 ……………………………………………………………………33
參考書目 ………………………………………………………………34
致謝 ……………………………………………………………………35
1 緒 論
機械設計制造及其夾具設計是對我們完成大學四年的學習內容后進行的總體的系統的復習，融會貫通四年所學的知識，將理論與實踐相結合。在畢業前進行的一次模擬訓練，為我們即將走向自己的工作崗位打下良好的基礎。
機械加工工業規程是指導生產的重要的技術性文件，它直接關系到產品的質量、生產率及其加工產品的經濟效益，因此工藝規程的編制的好壞是生產該產品的質量的重要保證的重要依據。在編制工藝時須保證其合理性、科學性、完善性。
夾具設計是為了保證產品的質量的同時提高生產的效率、改善工人的勞動強度、降低生產成本，因此在大批量生產中，常采用專用夾具
這次畢業設計，難免會有許多的問題，懇請各位指導教師給予幫助，希望通過這次設計能鍛煉自己的分析問題、解決問題的能力，為以后 參加工作打下良好的基礎。
2 零件分析
題目所給的零件是機床尾座體，尾座安裝在機床的右端導軌上，尾座上的套筒可以安裝頂尖，以支承較長的工件的右端（即頂持工件的中心孔）、安裝鉆頭、絞刀，進行孔加工，也可以安裝絲錐攻螺紋工具、圓析牙套螺紋工具加工內、外螺紋。尾座可以沿尾座導軌作縱向調整移動，然后壓下尾座緊固手輪將尾座夾緊在所需位置，搖動尾座手輪可以實現對工件的頂緊、松開或?qū)ぜM行切削的縱向進給
2.1 零件的特點
由圖可知，該零件為不太規則的部件，其主要技術特點如下：
1.鑄件需要消除毛刺和砂粒、并作退火處理
2. 17H6要求圓度為0.003
3. 17H6要求圓柱度0.004
4. 17H6與導軌面的平行度為0.005
5. 17H6與燕尾面的平行度為0.005
6. 17H6的孔軸心線與導軌面的位置度誤差為0～0.1
7. 17H6的孔與燕尾面的位置度誤差不超過0.15
8.各面的粗糙度達到需要的要求
9. 17H6的孔需精加工、研配
10.導軌面配刮10～13點/25 25
2.2 零件工藝分析
根據零件圖可知、主要進行導軌面的加工、孔加工和表面加工、鉆孔、攻絲，孔的精度要求高。該零件年生產5000件屬大批量生產，在加工是為了提高勞動效率、降低成本，設計加工零件需要設計專用夾具。
（3）定位誤差
①定位元件尺寸及公差的確定。夾具的主要定位是導軌面和燕尾，該端面與孔的垂直度有一定的要求。
②還有就是45 的夾角可能存在一定的誤差。
5 總 結
通過這次畢業設計，使我對產品設計過程有了進一步的認識，對結構設計有了更進一步的了解，也加深了對大學四年中所學的基礎知識的學習和理解。畢業設計是理論聯系實際的最有效方法。在具體設計過程中，必須考慮到方方面面的問題，在理論上正確無誤的設計，在實際中往往存在各種問題。這樣，在設計時就必須考慮，所設計的機構是否合理在實際運用中能否正常工作。畢業設計使我學會了從實際出發設計產品，而不僅僅考慮理論上的可行性。
在本次課程設計的制作過程中，我深深的體會到一個看似簡單的機構其實并不像我們想象中的那么簡單，它所要考慮的東西還很多。要完善一個產品首先應該對其功能作用有充分的了解，然后對實現這些功能的結構進行分析，考慮哪種結構能夠?qū)崿F(xiàn)這種功能，哪種結構更加合理、有效、簡便。根據了解的類似結構進行仔細分析，再進行適當?shù)母倪M、創新，爭取用最低的成本實現最先進的功能。最后再根據結構設計出各個零件，應當考慮到零件的加工、材料、成本等問題。
在設計過程中，盧宗彪老師給予了我悉心指導，提出好的建議，使我獲益良多。同學之間互相研討，共同解決問題，互相幫助，互相學習，使我體會到了團隊的可貴，懂得了團隊精神的重要性。 畢業設計是我在學校的最后一次答卷，我也把它看成是我邁向社會的第一步
參 考 文 獻
[1] 東北重型機械學院，洛陽農業機械學院，長春汽車廠工人大學。機床夾具設計手冊［Ｍ］。上?？茖W技術出版社，1984。
[2] 李洪。機械加工工藝手冊［Ｍ］。北京出版社，1996。
[3] 李慶壽。機床夾具設計［Ｍ］。機械工業出版社，1991。
[4] 張進生。機械制造工藝與夾具設計指導［Ｍ］。機械工業出版社，1995。
[5] 上海市金屬切削技術協會。金屬切削手冊［Ｍ］。上?？茖W技術出版社，2004。
[6] 黃如林，劉新佳，汪群。切削加工簡明實用手冊［Ｍ］?；瘜W工業出版社，2004。
[7] 王光斗，王春福。機床夾具設計手冊［Ｍ］。上?？茖W技術出版社，2002。
[8] [ 周永強，高等學校畢業設計指導[M]，北京：中國建材工業出版社，2002。
[9] 劉文劍，曹天河，趙維，夾具工程師手冊[M]，哈爾濱：黑龍江科學技術出版社，1987。
[10] 余光國，馬俊，張興發，機床夾具設計[M]，重慶：重慶大學出版社，1995。
[11] 東北重型機械學院，洛陽農業機械學院，長春汽車廠工人大學，機床夾具設計手冊[M]，上海：上?？茖W技術出版社，1980。
[12] 李慶壽，機械制造工藝裝備設計適用手冊[M]，銀州：寧夏人民出版社，1991。
[13] 廖念釗，莫雨松，李碩根，互換性與技術測量[M]，中國計量出版社，2000：9-19。
[14] [王光斗，王春福，機床夾具設計手冊[M]，上海科學技術出版社，2000。
[15] 樂兌謙，金屬切削刀具，機械工業出版社，2005：4-17。
[16] Machine Tools N.chernor 1984.
[17] Machine Tool Metalworking John L.Feirer 1973.
致 謝
首先感謝老師給我的指導。在設計和論文寫作過程中，我始終得到老師的悉心教導和認真指點，使得我的理論知識和動手操作能力都有了提高。在他身上，時刻體現著作為科研工作者所特有的嚴謹求實的教學風范，勇于探索的工作態度和求同思變、不斷創新的治學理念。他們不知疲倦的敬業精神和精益求精的治學要求，端正了我的學習態度，使我受益匪淺。
另外，還要感謝同學，他們在尋找資料，解答疑惑，論文修改等方面，都給了我很大的幫助。
最后，感謝所有給予我關心和支持的老師和同學。
畢業設計(論文)外文資料翻譯學 院 ：機械工程學院 專 業 班 級 ：機械設計制造及其自動化 學 生 姓 名 ：學 號：指 導 教 師 ：外 文 出 處 ： 《Design of the DistributedArchitecture of a Machine-tool》 附 件 ：1.外文資料翻譯譯文； 2.外文原文 指導教師評語：簽名： 年 月 日分布式機床的設計FIP現場總線的用途Daping SONG, Thierry DIVOUX，費朗西斯勒帕熱自動化中心研究所的Nancy摘要：本文中我們基于FIP現場總線上提出了一種分布式控制系統。它將取代傳統的CNC(計算機數字控制裝置)用于機床上。該系統是由一套以微處理機為基礎的模塊(PC機、運動控制器、I/O接口) 利用FLP實時網絡相互聯接的。這主要是使每個模塊智能化以提高整個系統的靈活性和容錯能力。每個模塊都是一個分控系統，用于實現自己的分控任務，其中有些模塊用于運動控制，另一些模塊用于傳感器評價和執行器調節。FIP決定了這些模塊之間的通訊（信息交流和同步），同時執行任務分配以及設備布局分布。我們討論一些分布標準并描述實驗的執行。1.引言近幾年，一直對分布式體系結構進行了許多研究。分布式體系結構在系統集成上發揮主要作用。在機床控制域，目前 CNC 技術有它內在的缺點。將幾根固定數量的軸容入 CIM 環境中是非常費時，靈活和不易的。超大規模集成電路微處理器技術和通信網絡的迅速發展使分布式控制成為可能。雖然逐步擴展沒有完全替代硬件更換但分布式控制系統的性能，模塊化，完整性和可靠性正在提高。它為替代控制系統架構提供了一個很好的前景。本文致力于對分布式機床結構的研究。它建立在智能設備與通信相聯系的基礎上。分布式機床的特點是分布式任務和分布式數據，且具有獨特的控制方法。它是結合標準設備和 FIP 系統總線設計而成，通過實驗證明該系統具有可執行性，在實驗中該系統控制了復合軸系，成功執行坐標之間的關系同時也反應了對傳感器值的變化。該論文結構如下：第 2 部分描述了機床控制系統構架。第 3 部分簡要介紹了 FIP 現場總線。第 4 部分概述了我們實驗的實施。最后，我們在第 5 部分總結了一些一般性意見和今后的研究前景。2.機床控制系統架構該機床控制系統是一個實時多任務系統。其功能結構如圖 1 所示。它包括三種單元：用戶接口/ 監控單元/規劃單元，伺服單元，傳感器/制動器單位。這個系統的主要功能是用來控制工件的加工。它包括兩個不同的和相關的任務：● 為了確保軌跡的準確性和對機床移動部件的速度控制● 為了調查定位（跟蹤）過程的正確執行，環境變化的影響與指定操作的執行或機床機件的運動同樣重要。例如：工具開關，冷卻，潤滑等。CAM 的制造日期圖 1：架構功能按時間順序，這項任務也可分為兩個步驟：規劃控制程序規劃和執行控制程序。第一步，機床機件沒有直接的方向，只有運動和被指定執行的操作，這工作規劃/編程（軌跡，工具的選擇，其他加工參數采集）基本替換計算軸伺服控制系統機床構件傳感器/制動器環境自動安全監測加工是“數據采集和預處理”的一步。雖然在第二步，是控制的有效執行。值得指出的是：在第二步由于多任務的性質，并行處理是可行的。3.FIP 現場總線FIP系統被用來滿足分布式機床上實時通信的需要。在這一節中，我們簡要地解釋一下FIP系統的技術性能。FIP（工廠儀表協議）是網絡系統用于傳感器的驅動器和控制設備如PLCS，CNCS或機器人控制器之間的信息交換。FIP系統的結構采用所謂的密封性以減少OSI模型(物理層,數據鏈路層和應用層)，這種結構使實時通信和常規的信息溝通之間有明顯的區別。在數據鏈路層中，相關服務一方面與其他傳遞信息服務可變轉讓。在應用層中，我們可區分MPS服務（制造周期/非制造性規范），它采用來自數據鏈路層的信息設備所支持的MMS設備。FIP支持兩個傳輸媒體：屏蔽雙絞線和光纖。FIP允許各種各樣的布局，最長部分可達500米，至少有4個部分被中繼器代替。3種比特率被確定為：31.25k.比特/秒，1兆位/秒和2.5兆位/秒。FIP介質訪問控制是集中的。所有轉讓都由the Bus Arbiter控制，時間安排轉移必須遵守時間要求。變量和信息之間的傳遞可采用定期配置或根據站的要求來轉讓，而在我們的應用中，F(xiàn)IP只采用可變轉讓。FIP采用生產者和消費者的模樣來產生可變交流。變量對于生產者和消費者而言，是被確定的一個獨特的識別標志，一套制作和消費變量可以集結在一個站，但是這些識別標志不涉及任何物理地址站。圖2顯示了變化信息。廣播的 BA 標識符 認識的人 P和一些消費者?生產者發出的日期 P所有消費者接受的數據 C 圖2：FIP系統的MAC圖象首先，the Bus Arbiter 廣播持有可變的標示符，所有的節點接受幀并檢查變數是生產還是消費產生的或不給予影響。第三步：作為生產者的站必須響應包含數據的幀。第四步：獲取消費者的變化價值并存儲。當更新產生時，消費者和生產者便形成了。FIP有兩種類型的數據交流：周期性和非周期性的。在這兩種情況下，匯率發生情況如上圖（圖2）。在第一種情況下，the Bus Arbiter根據從配置要求價值相應的標識定期轉移。第二種情況下，the Bus Arbiter 可根據現有的帶寬產生轉讓請求信號。在我們的應用中，實時的限制是非常嚴格的。為了使機床遵守給定的軌跡，軸的控制必須同步。這就要求和網絡連接的控制節點應該同時接受開始命令，因此網絡必須播出命令。為了確保相同的瞬時命令能同時被幾個接受器接受，穩定的傳輸是非常必要的。因此，一些傳感器例如運動控制傳感器就應該要求定期調查限位開關以使網絡能定期無重大延誤的傳輸數據。一句話，像分布式機床的操作，像數據廣播的要求，時間和空間的一致性，定期傳輸不能滿足任何一般用途的網絡。然而，實時網絡例如FIP就是數據一種好的解決方法。4.實驗實施如圖3所示，我們的應用目標是要實現一個分布式的兩軸機床控制系統。它由以下設備分布在FIP總線的四個節點上。節點1：微機（i80486 微處理器）。它作為運營商終端。節點2.3：兩個相同的節點。每個均由微機（i80486）配備了運動控制器(克萊斯勒PCIOO + 克萊斯勒三菱商事100)。節點4：一個帶有傳感器/制動器作為輔助業務的可編程控制器（低溫100）。網絡：FIP和1比特/秒的雙絞線介質間的選擇。軟件架構的執行系統是基于概念的多層次分布式控制。它有三種層次結構，其中第二和第三層次可實現分配。它包括以下層次：分析層：控制任務的執行選擇它被映射到微機的提供用戶界面的節點上。用來處理計劃收購和儲存，不同業務模式（手動和自動模式）的交換，起始點和終點以及其它各節點之間的計算和發送。慣例層：確定某一任務的控制算法它被映射到2種其他微機上（節點2和節點3）。這兩種微機具有根據給定的參數和命令（軌跡類型，速度，加速度等）進行基本位移計算（插補）的功能。每個軸的插補算法是軟件設計的困難之一，因為軸控制分布后，每個中間坐標軸的計算是獨立的。正確的算法設計可保證這些軸的連貫性。工藝層：執行控制它包含兩種運動：運動控制器和可編程控制器。這些設備執行伺服系統運動控制，處理加工件的舉行/緊縮政策，傳感器的評定和驅動器的調節使工具切換任務和監控系統更安全。為了驗證擬議的架構是否與時間限制和網絡能力相適應，預期流量的估計是必要的。主要有兩種性質的信息交流：● 命令從中央決定站（節點）傳到其它站?！?統計信息由站（節點）與站之間產生。例如:在我們的實驗平臺上,一些變數分布如下：節點1FIP 系統 節點2 節點4 節點3FIP系統 FIP系統運動控制 運動控制傳感器和制動器X軸 Y軸圖3:硬件執行5.結論本文中為滿足CIM的要求，我們的研究通過實驗實施進一步達到審定。我們現在正致力于用來證明符合執行實時限制的經營架構的仿真和性能分析的工作。我們的目標不僅是一個試樣樣機，更是研究設計、優化的分布式系統理論方案的發展。esign of the Distributed Architecture of a Machine-toolUsing FIP FieldbusDaping SONG, Thierry DIVOUX, Francis LEPAGECentre de Recherche en Automatique de NancyUniversite de Nancy I, BP239, 54506 Vandoeuvre-les-Nancy cedex, FranceAbstract: In this paper we propose a distributed control system based on FIP fieldbus. It is applied to machine-tool as a replacement for the traditional CNC (Computerized Numerical Controller). The system is composed of a set of microprocessor-based modules (PCs, motion controllers, I/OS, . ..) interconnected by FLP real-time network. The main idea is to enable each module to be intelligent, improving thus the flexibility and the fault tolerant capability of the whole system. Each module being a sub-control system, accomplishes its own control task, some of them for motion control and others for evaluating sensors and regulating actuators. The communication (information exchanges and synchronization) among these modules is ensured by FLP. This system allows both task distribution as well as equtpment topological distribution. We discuss some distribution criteria and describe an experimental implementation.1. IntroductionDistributed system architecture has been the subject of many research activities in recent years. It plays a major role in systems integration. In the machine-tool control domain, present CNC technology has its inherent shortcomings. It is centralized, limited to a fixed number of axis time-consuming, inflexible and difficult to be integrated in CIM environment. The rapid development of VLSI microprocessor technology and communication network enables the distributed control to be considered. Distributed control systems present the advantage of improving performance, modularity, integrity and reliability while allowing incremental expansion without complete hardware replacement. It offers a promising alternative to control system architecture.This paper is dedicated to study a distributed machine-tool architecture. It is based on intelligent devices interconnected on communication link. It is characterized by distributed tasks and distributed data, but with unique control access system. It is designed by using standard devices and FIP fieldbus and verified by a experimental implementation, in which the system controls a multi-axis machine to successfully execute a coordinated motion as well as to respond to sensors values changes.The paper is organized as follows. In section 2, the machine-tool control system architecture is described. Section 2 gives a brief description of FIP and Section 3 outlines our experimental implementation. We conclude in section 4 with some general remarks and future research perspectives.2. Machine-tool control system architectureThe machine-tool control system is a real-time and multitask system. Its classical functional architecture is shown in Fig.1. It consists of three units: user interface/supervisiou/programming unit, servo unit, and sensors/actuators unit. The main mission of this system is to control workpart machining. It includes two different and related tasks aspects: ●to ensure the precise trajectory and speed control of the mobile organs of machine-tool.●to survey the correct execution of this positioning (tracking) process, to react on environment changes as well as to perform the specified operations or actions upon machine-tool mechanics. such as tool switching, cooling, lubricating, etc. Fig. 1 Functional architectureChronologically, this mission is also divided into two steps: control program planning and control program executiug. In the first step, there is no direct action on machine-tool multitask nature: “data acquisition and preprocessing” step. While in the second step, the control is effectively executed. It is worth to note that in the second step, the parallelization is possible due to the mechanics, only the motions as well as the operations to be performed are specified. This is the “data acquisition and preprocessing” step. While in the second step, the control is effectively executed. It is worth to note that in the second step, the parallelization is possible due to themultitask nature.3.FIP fieldbusTo meet the real-time communication need in our distributed machine-tool, FIP is adopted. In this section, we briefly explain the main technical properties of FIP.FIP (Factory Instrumentation Protocol) is an industrial network designed for the exchange of information between sensors, actuators and control devices such as PLCs, CNCs or robotcontrollers. The architecture of FIP follows the so-calkd reduced OS1 model (Physical layer, Data link layer and Application layer). This architecture makes a clear distinction between real-time communication and conventional message communication. At Data Link layer, there are services associated to variable transfers on the one hand and conventional messaging services on the other hand. At Application layer, we distinguish the MPS (Manufacturing Periodic/aperiodic Specification) services which use variable transfers of Data Link layer from the MMS services which are supported by the messaging services of the Data Link layer.FlP supports two transmission media: shielded twisted pair and optical fiber. It allows for a wide variety of topologies. The maximum length of a segment is 500 m ;and at most 4 segmentsare authorized with repeaters. Three bit rates have been defined: 31.25 K.bit/s, 1 Mbit/s and 2.5 Mbit/s.FIP medium access control is centralized. All transfers are under control of the Bus Arbiter that schedules transfers to comply with timing requirements. Transfers of variables and messages may take place periodically according to system configuration or aperiodicalIy under request from any station. In our application, only variable transfer of FIP is used.For variable exchanges, FIP uses the producer-consumer model. ‘Variables are identified by a unique identifier known from the producer and the consumers. A set of produced and consumed variables can be regrouped in one station, but the identifier is not related to any physical address of stations. Fig. 2 shows the broadcast of a variable.Fig2 Principle of MAC protocol of FIPFirst, the Bus Arbiter broadcasts a frame that holds the identifier of the variable. All nodes receive the frame and check whether they are producer or consumer of the variable or not concerned. In a third step, the station that recognizes itself as the producer replies with a response frame that contains the data. In a fourth step, all the consumers of this variable capture the value and store it. The consumers and the producer are formed when the update takes place.FlP defines two types of data exchanges: periodic and aperiodic. In both cases, the exchange takes place as indicated above (Fig. 6). In the first case, the Bus Arbiter knows from the configuration that it has to request periodically the transfer of the value corresponding to an identifier. In the second case, transfer requests are signaled to the Bus Arbiter that will serve them according to the available bandwidth.For our application, the real-time constraints are very stringent. To make the machine-tool to follow an accurate trajectory, the control of the axis must be synchronized. This requires that the control nodes connected by a network should simultaneously receive the starting order, so the network should be able to broadcast orders. To ensure that an order of the same instant is received by several receivers, a spacec onsistency statue is also necessary. For responsiveness reason, some sensors like movement-limit switches should be polled periodically requiring that the network be able to transmit periodic data without important delays.In one word, for an application like distributed machine-tool, the requirements like broadcast of data , the time and space consistencies, the periodic transmission can not be met by any general-purpose networks, a real-time network like FIP is then a good solution.4. Experimental implementationAs shown in Fig. 3, our application is aiming to realize a distributed two-axis machine-tool control system. It is composed of the following devices distributed on four nodes over FIP fieldbus:node1: a microcomputer (i80486 microprocessor). It is used as operator terminal,node 2. 3: two identical nodes. Each consists of a microcomputer (i80486) equipped with a motion controller (DCX PClOO+DCX MC 100).node 4: a PLC (LT 100) with sensors/actuators for auxiliary operations.network: FIP with 1Mbits/s over twisted pair medium is chosen.The software architecture of the implemented system is based on the concept of multilayered distributed control. It has a three-level hierarchy and the distribution is realizes at the second and the third levels. It consists the following layers:Analysis layer: performs selection of the control tasksIt is mapped on to the microcomputer of node 1 which provides an user interface. It deals with the program acquisition and storage, switches the different operational modes (manual and automatic modes), computes and sends the start and arrival points coordinates as well as other orders to each other node respectively.Rule layer: determines the control algorithms for a given task.It is mapped on to the two other microcomputers (node 2 and 3) which function is elementary displacements calculation (by interpolation) according to the given parameters and orders ( trajectory type, speed, acceleration,. etc.).One of the software design difficulties is the interpolation algorithms for each axis. Because after axis control distribution, the calculation of the intermediate coordinates of each axis becomes independent, the coherence of these axis should be ensured by correct algorithm design.Process layer: executes the control.It includes the two motion controllers and the PLC. These devices executes servo systemmotion control, handles the workpart holding/tightening, tools switch tasks and monitors system safety by evaluation of sensors and regulation of actuators.In order to verify if the proposed architecture is suitable with time constraints and network capacity, in is necessary to estimate the expected traffic.There are mainly two natures of information exchanges:●orders from central decision station (node 1) to other stations.●state information produced by the stations ( node1) to other stations.For example concerning our experimental platform, we have delined some variables distributed as following: Fig3 Hardware implementation5. Conclusionln this paper, we investigated a distributed machine-tool architecture in order to meet CIM requirements. Our research reached the step of validation through the realization of anexperimental implementation. We currently work on the simulation and performance analysis of the operating architecture to justify that the implementation meets real-time constraints. Our objectiveis not only an experimental prototype, but also the development of the theoretical methodology for the design, optimization of this distributed system.