【溫馨提示】 dwg后綴的文件為CAD圖,可編輯,無水印,高清圖,,壓縮包內文檔可直接點開預覽,需要原稿請自助充值下載,請見壓縮包內的文件及預覽,所見才能所得,請細心查看有疑問可以咨詢QQ:414951605或1304139763
摘要
混凝土泵車在建筑施工作業中, 以其節省勞動力施工速度快、澆筑質量高等一系列優點受到人們的普遍重視,現己成為建筑施工過程中不可缺少的機械設備。本文首先介紹了泵車結構和特點以及工作原理,重點對泵車的穩定性、底座和回轉支承部分進行了校核和設計,通過對泵車的傾翻力矩和穩定力矩的比較從而確定整車的穩定性,對回轉支承的受力載荷和受力分析以及強度校核最終確定選擇雙排球的回轉支承,這種回轉支承有上、下兩排滾動體,它具有較大的接觸壓力角,同其它形式的回轉支承相比能承受很大的軸向載荷和傾翻力矩,回轉底座部分通過對危險截面的強度校核以確定回轉底座的材料,設計為了保證其回轉底座的結構緊湊可靠在其內部設計了油箱和水箱,在凝土泵車回轉區域由于連接回轉支撐及回轉減速機,為了保證回轉減速機及回轉支撐具有良好的嚙和特性,回轉部位均設計具有較大的剛度,在該區域的設計廣泛采用的辦法是薄座圈板加筋增加整體剛性的辦法以及厚座圈鋼板的連接方法,主體結構部分通過焊接完成。
關鍵詞:混凝土泵車;傾翻力矩;穩定力矩;回轉支承;回轉底座;
Abstract
The concrete pump car is in the building the construction the homework, with it economical labor force construction speed quick, sprinkle to build quality a series of advantage is widespreadly valued by people, personal become a building construction process now in indispensability of machine equipments. With the modern science technical quick development, pump car the application is more and more wide in the modernization the building the production line.This text first introduced a pump car structure and characteristics and work principle, point to pump car of stability, base and turn-over paid to accept part to carry on a check and design, through to pump car of the tipping gear moment and stability moment of more and thus make sure the whole car of stability, to the turn-over pay to accept of is carry by dint lotus and is analyze by dint and the strength check an end and certain choice double the turn-over of the volleyball pay to accept, this kind of the turn-over pay accept up, the next two rowses roll over a body, it have bigger contact pressure cape, the turn-over of together other forms pay accept compare can bear very big stalk to carry lotus and tipping gear moment, turn round a base part pass to dangerous piece noodles of strength check with material of make sure the turn-over base, design for promise the structure tightly packed credibility that it turns round a base at it internal designed fuel tank and water tank, pump car turn-over district because of conjunction the turn-over prop up and turn round deceleration machine, for promising turn-over deceleration machine and turn-over prop up to have good and characteristic and turn round part to all design to have bigger just degree, in the design of that district extensively adopt of the way be the conjunction method that thin turn plank adds the increment whole and rigid way and thick turn steel plate, corpus structure part pass to weld completion.
.
Keywords The concrete pump truck The tipping gear moment The stability moment
The angulation bearing The swinging base
徐州工程學院畢業設計(論文)
目 錄
1 緒 論 1
1.1前言 1
1.2國外的泵車研究現狀和發展趨勢 1
1.3我國的研究現狀和發展趨勢 2
1.4 國內外混凝土泵車技術水平比較 3
1.5 混凝土機械發展趨勢 4
1.6 泵車現代設計方法概述 4
2 泵車組成、工作原理及技術參數確定 6
2.1混凝土泵車的基本組成與構造 6
2.1.1混凝土泵車基本組成 6
2.1.2混凝土泵車構造 6
2.2 泵車的工作原理 7
2.3 泵車的主要技術參數的確定 8
3混凝土泵車底架設計特點及整體設計 10
3.1混凝土泵車底架結構的特點及主要連接方式 10
3.2混凝土泵車底架設計制造中的難點及重點 10
3.3設計優化理論和計算方法在設計、制造中的應用 11
3.4混凝土泵車底架結構的發展趨勢 12
4 混凝土泵車的穩定性 13
4.1 布料桿的組成及結構形式 13
4.1.1 布料桿 13
4.1.2 布料桿的結構 13
4.1.3 布料桿的形式 13
4.2 部件重心的計算 14
4.3 泵車工作時的穩定性計算 16
4.3.1布料桿傾翻力矩的計算 16
4.3.2 布料桿的穩定力矩的計算及穩定性判斷 17
5 回轉支承的設計 19
5.1回轉支承裝置的作用 19
5.2回轉支承裝置的類型 19
5.3 回轉支承裝置的選擇 19
5.3.1 載荷的確定 19
5.3.2 回轉支承的受力分析 20
5.4 回轉支承選型 23
5.5 回轉支承裝置的強度計算 24
6 回轉底座的焊接加工工藝 26
6.1焊接的特點、分類及其應用 26
6.1.1 焊接 26
6.1.2 焊接成型技術的特點 26
6.1.3 焊接方法及分類 27
6.2 計算校核底座與支腿連接處的強度 27
6.2.1 剛性支承體系 27
6.2.2 柔性支承體系 27
6.2.3 支腿反力計算以及危險截面的強度校核 28
6.3 回轉底座的整體焊接 30
6.3.1 回轉底座的結構特點 30
6.3.2 焊接裝配前的準備 31
6.3.3 焊接中的定位焊 31
6.4 回轉底座的主體焊接 32
6.5 回轉底座油箱和水箱的焊接 36
6.6 焊接質量檢驗 37
6.6.1 焊接質量檢驗的重要性 37
6.6.2 焊接質量檢驗的過程 37
結論 39
致謝 40
參考文獻 41
附錄 42
附錄1 42
2