壓縮包內含有CAD圖紙和說明書,均可直接下載獲得文件,所見所得,電腦查看更方便。Q 197216396 或 11970985
翻譯部分
1.1 中文譯文
輥式破碎機的運轉模型
摘要
在這一篇論文中我們?yōu)檩伿狡扑闄C(jī)發展一個運轉模型。產品尺寸分布被認為是破碎機的轉子半徑、角速度、補給速度和補給尺寸分布聯合作用的結果。模型建立在含密級和破裂矩陣標準矩陣公式的基礎上。這個模型能被應用到槌式和垂直軸式輥式破碎機,幫助估算每單位質量需要的沖擊能。
在這里我們建議把破碎機的分類和破碎作用納入破碎特性的動力學考慮范圍。密級功能有累積的Weibull分布的形狀并且合并一個取決于沖擊能和補給速度的多數最小的顆粒會破尺寸。破裂功能被做成二個Broadbent—Callcott分布合成的模型。它假定對產品的粒度破面的比例比速度起決定作用的沖擊能和補給速度通過被提議的表達式。模型的預測結果被和一個試驗工場的槌式破碎機破碎石灰?guī)r的實驗的數據相較。轉子速度和補給速度的改變引發產品尺寸分布的變化被研究。
1. 介紹
時下,輥式破碎機被廣泛地用于粉碎操作,因為他們的高尺寸變形比,產品的容易修正和相對簡單的設計。另一方面,作為一種可靠,節約時間和節省費用的方法,預測礦物處理廠會通過越來越多的做模型和模擬來發展,分析和優化起決定作用的電路。在這篇論文中,輥式破碎機的有關數學上的模型的實用性是對于一個這樣的工廠的成功模擬是非常重要的。
盡管它重要,然而,這個輥式破碎機粉碎行為的模型只受到文獻的小關注。最近已經有一些人嘗試為這發展運轉破碎機這種類型的模型,舉例來說Csoke和Racz(1998)、Attou et al(1999),但是然而, 一些大量的重要工作還需要去做。除此之外,那為礦石的模擬處理的可得的商業代碼對于輥式破碎機仍然設置缺乏特性模型,它們明顯地減少了應用字段。
在這一個工作中我們發展一個能被應用到所有類型的輥式破碎機的運轉模型。我們的目標是通過提供了破碎機的轉子速度和半徑和補給速度和尺寸分布,在工作之前被預測產品尺寸分布。通過一些合理數目的可調整的參數考慮特定的礦石道具和破碎機的設計。
現在,Whiten和White(1979)發展的錐形和顎式破碎機的標準模型被認為是出發點。因為沖擊破裂的特殊性,在它的最初形態中,這一個模型不能夠作為輥式破碎機的模型。然而,在錐形和顎式破碎機的一般破裂加工方案(見到圖.1)在我們的情況中仍然可適用,密級和那破裂描述碎裂的功能過程從統計觀點應該被再考慮。
錐形和顎式破碎機的碎裂過程相對地慢,破碎過程建立在壓縮應力作用于顆粒一部分的表面的基礎上。二者擇一地,沖擊破裂發生在比較短時間暗示著一個動態的裂痕擴散導致非常快的速度破壞顆粒。依照奧斯汀(1984)的理論,沖擊發生時有壓縮力,而且拉的陡震波穿透顆粒。由于這個重要的陡震波的出現,快速成長的拉應力幫助顆粒從里面破斷。除此之外,顆粒破裂理論被Oka和Majima(1970)提出,因為大點的顆粒含比小的顆粒含有更多的微裂紋,所以它們應該更容易破斷。為了要解釋動力學沖擊破裂的特性,我們用一個決定于沖擊能的累積的Weibull分布代替標準的密級為。因此, 為輥式破碎機的運轉的重要的參數如轉子半徑和速度和補給速度自然地在我們基于簡單顆粒動力學考慮的模型的基礎上組合成一體。
接下來, Whiten和White(1979)發展的破碎機的破裂功能被二個Broadbent—Callcott分布合成一起代替,分別表現產品的粒度和產品的粗破面。細顆粒部分在產品中比例被假定隨著增加轉子速度增加和減補給速度而增加,這是符合實驗的觀察的。模型的預測結果被和一個試驗工場的槌式破碎機破碎石灰?guī)r的實驗的數據相較。 在文章中,矢量(f)和矩陣(C)被在符號下面劃線指示。
2.模型發展
2.1. 質量平衡
Whiten(1972)為發展了一個示意性的圖表模型來表示錐形和顎式破碎機的尺寸分布,稍后被Whiten和White(1979) 改良,模型在圖.1中被顯示。,顆粒被他們的尺寸分布,分別被矢量f(補給)和p(產品)表現的不連續形狀,表示的特色。密級算子C(一個對角線矩陣)為每個不同尺寸的顆粒計算破裂的可能性。破裂算子B(一個比較低次的三角形矩陣)在初步定義的尺寸等級管理破碎的顆粒的重新分配。
補給顆粒為被C選擇進行破裂。沒有破裂的不改變形狀在產品中通過。破裂的顆粒碎片被B重新分配而且連同新的補給材料一起進行碎裂。根據Whiten(1972)的理論,產品尺寸分布p能被公式表示為下面的樣子:
p=(I-C)·(I-B·C)-1·f (1)
I是特性矩陣
最近,Csoke和 Racz(1998)發展了一個槌式破碎機的破碎模型,建立在假設當單一破裂在以槌桿擠入之后,槌式破碎機做模型受制于顆粒補給速度一個參數的基礎上。這造成下列的質量平衡方程式:
p=B·C·f+(I-C)·f (2)
上述的方程式符合密級和破裂矩陣被沒有反饋的連接方案,在圖.1中被顯示。結論,方程式(2)沒有包含方程式(1)中的逆矩陣。Attou et al(1999)發展了Csoke 和 Racz 的方式而且考慮二種不同的破裂過程在槌式破碎機中處理。在他的模型里,由于轉子的槌桿顆粒在沖擊之前破斷或在槌桿和破碎機的內壁沖擊之后。這個模型的質量平衡方程式(2)的延伸,做不到從現在顆粒的破裂出發,進一步進行合并碎裂的可能性。我們用兩者的質量運行數字的模擬平衡定律 (1) 和 (2)進行比較,發現方程式 (2) 是和破裂的清晰度和密級矩陣矛盾的。實際上,它預測那產品含有一個無補給顆粒的可以忽略部分,破碎機有100%的破裂速度,實際上物理上是不可能的,因為被提出的方程式?jīng)]有考慮顆粒聚結。因為這一個原因,我們使用標準的質量平衡定律(1),意味著從破裂發行母顆粒破碎出來的碎片能進行進一步的碎裂。我們相信假定合并在方程式(1)中適用于在沖擊的情況,破碎機大部分的補給顆粒的確受制于超過一個碎裂,由于顆粒–鑄壁和顆粒–顆粒碰撞。
2.2單位質量沖擊能
考慮在一個單一顆粒和一個槌式破碎機的破碎桿之間的沖擊。給予轉子的質量比補給一個單一顆粒質量重一些,破碎桿的線速度比微粒的速度重要些,單一顆粒動能與轉子的動能相比是可以忽略的??紤]顆粒的動量在沖擊前后的線性保護系統, Attou et al (1999)得出下面的單位質量沖擊能的公式:
E=0.5·(R+0.5·Hb)2·ω2 (3)
式中R(m)是轉子半徑,Hb(m)是重要齒根破碎面的高度,ω(s-1)是轉動角速度。
在垂直軸式破碎機中,顆粒被輸送到一個放射狀的水平轉動的轉臺 (轉子)而且通過離心力向破碎機的周壁拋射。 不像在槌式破碎機中,這里大部份的碎裂發生在破碎機的墻壁而不是在轉子的外圍。假定顆粒在飛向破碎機周壁的時候能量沒有改變,也就是說忽略能顆粒–顆粒的作用。被疏忽在第一個逼近, Nikolov 和 Lucion (2002)為單位質量沖擊能導出了下面的公式:
E=Rv2·ω2 (4)
式中Rv(m)和ω(s-1)代表轉子半徑和角速度,符號Rv被用于在槌式和垂直軸式破碎機在公式(3)和(4)中各自的區別。
有趣的是,我們注意到相同的轉子半徑下,槌式破碎機的單位質量沖擊能比垂直軸式破碎機要低一些。這可以說明垂直軸式破碎機比槌式破碎機產生更多的微粒和在微粒必須減小尺寸(沖擊能在這些機器中能達到更高的水平)的情況下工作更好的事實。
3. 結果
模型在早先的斷面中發展已經在一個內部的互傳式譯碼中實現。這個模型已經與實驗一起有效在一個槌式破碎機上運行,它的轉子直徑和寬度分別為0.65m和0.45m。 轉子半徑是R=0.325 m;那轉子沖擊桿高度是Hb=0.1 m。用的材料是來自比利時的 Tournai 區域的石灰?guī)r,。 補給已經由屏幕校正,使用材料的尺寸從 14 到 20 毫米不等。 最大的顆粒補給的尺寸是直徑為dmax=26 mm。 參考補給速度 Q0 和參考沖擊能 E0 是輪流分別地是 2t/h和 300 J/ kg。 其余方程式(8)的參數。依下列各項被取值:c0=1.4, c1=0.12,n=0.35。破裂動作的參數( 方程式(11)和(12)),m,l和 c2 被分別地設定為0.74, 2.6 和 0.55。參數的值必需計算密級的形狀參數功能被調整到k0=1.35, k1=0.1。
我們已經完成了以不同的補給速度補給的二個組進行模擬實驗的數據,即 Q=2 和 7t/h。以固定的補給速度,產品獲得以三個不同的轉子速度(ω=540;720;900轉/分)已經被分析。重要的是注意除了轉子速度和補給速度以外, 所有的其他模型參數已經被保持不變地進行完全部運行模擬。
在2t/h的速度的實驗下,以不同的轉子速度獲得的產品的模擬尺寸分布在圖.2 中被比較。在7t/h的速度的實驗中對應的產品的模擬尺寸分布在圖.3中被描述。
可以看到,模型能夠用一個合理的精度預測產品尺寸分布,即使當重要的變化在轉子速度和那補給速度兩者之間被強加。以固定的補給速度,較高的轉子速度生產一個較好的產品尺寸分布。另外,補給速度的增加造成在固定的轉子速度下的產生較粗的產品。結果證實產品從打破得支離破碎的沖擊下獲得的尺寸分布比以錐形或顎式破碎機破碎獲得更寬廣。
轉子速度和補給速度的在顆粒遭受破裂的最小的尺寸dmin的影響力在圖 4 中被顯示??梢钥吹?dmin 強烈地依賴轉子速度和補給速度,在給定的操作條件下,它的范圍從3.8 到 7.8 毫米不等。
關于轉子速度和補給速度的粒度破面的比例的進化在產品中被顯示在圖.5中.可以看出,隨著轉子速度的增大和補給速度的減小,它是增加的,在給定的操作條件下它的變化范圍是0.35 到 0.59。
通過比較,當Whiten和White的模型被用來進行短冒口錐形破碎機的仿真的話,參數φ、m和l是常常分別地固定在0.2,0.5和2.5。 一個比較有價值的發現是,通過我們的實驗,我們得出來一個大家都知道的事實,就是輥式破碎機粒度φ比錐式和顎式破碎機有更高的粒度。
4. 結論
在結論中,我們已經發展了一個輥式破碎機的運轉模型,它可以在不變的操作條件和合理的一組參數下,預測產品的尺寸分布。。輥式破碎機的特殊特性是模型的兩個參數,密級和破裂功能,兩者都決定于轉子半徑、角速度和補給速度上。介紹破碎顆粒的最小可能尺寸和小粒度在產品中的比例對于一個成功的輥式破碎機模型是非常重要的。模擬結果很好的符合了實驗,并且指出在補給速度和尺寸被保持不變的情況下,較高的轉子速度可以使產品尺寸分布變的較好。另外,轉子速度一定的情況下,比較高的補給速度容易產生較粗的產品。模型能容易地被實現在現有的礦物模擬處理的商業的代碼上。它可以應用于預測運轉速度不變的槌式或垂直軸式破碎機在復雜的程序表中整合。進一步的工作是要求模型適應不穩定和瞬態操作。
1.2 英文原文
A performance model for impact crushers
S. Nikolov *
Centre Terre et Pierre, 55 Ch. d’Antoing, B-7500 Tournai, Belgium
Received 3 May 2002; accepted 17August 2002
Abstract
In this paper we develop a performance model for impact crushers. The product size distribution is obtained as a function of the Crusher’s rotor radius and angular velocity, the feed rate and the feed size distribution. The model is based on the standard matrix formulation that includes classification and breakage matrices. It can be applied to both hammer and vertical-axis impact crushers with the help of the corresponding estimations for the impact energy per unit mass.
Here we propose classification and breakage functions for impact crushers taking into account the dynamic character of the impact breakage. The classification function has the form of a cumulative Weibull distribution and incorporates a minimum breakable size of the particles depending on the impact energy and the feed rate. The breakage function is modelled as the sum of two Broadbent–Callcott distributions. It is assumed to depend on the impact energy and the feed rate through the proposed expression for the proportion of the fine fraction in the product.
The model predictions are compared with experimental data for limestone treated in a pilot-plant hammer crusher. The variations of the product size distribution resulting from changes in the rotor velocity and the feed rate are investigated.
Θ 2002 Elsevier Science Ltd. All rights reserved.
1.Introduction
Nowadays, impact crushers are widely used for comminution operations because of their high sizereduction ratio, easy modification of the product and a
relatively simple design. On the other hand, the prediction of the behaviour of mineral processing plants through modelling and simulations is the more and more employed as a reliable, time- and cost-saving approach for development, analysis and optimisation of crushing circuits. In this context, the availability of relevant mathematical models for impact crushers is important for a successful simulation of such plants.
Despite its importance, however, the modelling of the comminution behaviour of impact crushers received little attention in the literature. There have been some recent attempts to develop performance models for this type of crushers, for example by Csoke and Racz (1998) and Attou et al. (1999), but nevertheless, a significant amount of work remains to be done. In addition, the available commercial codes for simulation of ore processing plants still lack specific models for impact crushers, which obviously reduces their field of application.
In this work we develop a performance model that can be applied to all types of impact crushers. Our goal is to predict the product size distribution, provided that the crushers rotor velocity and radius as well as the feed rate and size distribution are known before hand. The specific ore properties and the crusher’s design are taken into account through a reasonable number of adjustable parameters.
Here, the standard model for cone and jaw crushers developed by Whiten and White (1979) is taken as a starting point. Because of the specificity of the impact breakage, this model cannot be used for impact crushers in its original form. While the general scheme of the breakage process in cone and jaw crushers (see Fig. 1) is still applicable in our case, the classification and the breakage functions that describe the fragmentation process from statistical point of view should be reconsidered.
The fragmentation process in cone and jaw crushers is relatively slow and is based on the application of a compression stress on a part of the particles surface.
Alternatively, the impact breakage takes place at a much shorter time scale and implies a dynamic crack propagation that leads to a much faster failure of the particles. According to Austin (1984), the impact generates compressive and tensile shock waves travelling throughout the particle. The presence of a significant, rapidly mgrowing tensile stress helps the particles to break from within. In addition, the particle breakage theory proposed by Oka and Majima (1970) states that larger particles should break more easily because they contain larger micro-cracks compared with the smaller ones.
In order to account for the dynamic character of the impact breakage, we replace the standard classification function for crushers with a cumulative Weibull distribution depending on the impact energy. Thus, important parameters for the performance of impact crushers such as the rotor radius and velocity as well as the feed rate are naturally incorporated in our model on the basis of simple particle dynamics considerations.
Next, the breakage function for crushers proposed by Whiten and White (1979) is replaced with the sum of two Broadbent–Callcott distributions representing the fine and the coarse fractions in the product. The proportion of the fine fraction in the product is assumed to increase with increasing the rotor velocity and to decrease with increasing the feed rate, which is in accord with the experimental observations.
The model predictions are compared with experimental data for limestone treated in a pilot-plant hammer crusher. Throughout the text, vectors (f) and matrices (C) are denoted by underlined symbols.
2. Model development
2.1. Mass balance
A schematic representation of the size-distribution model developed for cone and jaw crushers by Whiten (1972) and later improved by Whiten and White (1979) is shown in Fig. 1. The particles are characterized by their size distribution, which is represented in a discrete form by the vectors f (feed) and p (product) respectively.
The classification operator C (a diagonal matrix) computes the probability of breakage for each particle size. The breakage operator B (a lower triangular matrix) governs the redistribution of the broken particles in the preliminary defined size classes.
The feed particles are selected for breakage by C. Those that do not break pass unchanged in the product. The debris of the broken particles are redistributed by means of B and are eventually subjected to further fragmentation together with the new feed material. According to Whiten (1972), the product size distribution p can be expressed as follows:
(1)
where I is the identity matrix and denotes the inverse of a square matrix.
More recently, Csoke and Racz (1998) developed a model for hammer crushers with the basic assumption that the feed particles are subjected to a single breakage after impact with the hammer bars. This results in the following mass balance equation:
(2)
The above equation corresponds to a scheme where the classification and the breakage matrices are connected in series without the feedback shown in Fig. 1. Consequently, Eq. (2) does not contain the inverse matrix appearing in Eq. (1). Attou et al. (1999) extended the approach of Csoke and Racz and considered two different breakage processes in hammer crushers. In his model, the particles can break either after impact with the hammer bars of the rotor or after collision with the internal walls of the crushers chamber. The mass balance of this model is an extension of Eq. (2) and does not incorporate the possibility for further fragmentation of the debris issued from breakage of parent particles.
We performed numerical simulations with both mass balance laws (1) and (2) and found that Eq. (2) is incompatible with the definition of the breakage and the
classification matrices. Actually, it predicts that the product contains a non-negligible fraction of feed particles having a probability of breakage of 100%, which is physically impossible because the proposed equations do not account for particles agglomeration.
For this reason, we use the standard mass balance law (1), which implies that the debris issued from breakage of parent particles can be subjected to further fragmentation. We believe that the assumptions incorporated in Eq. (1) are applicable in the case of impact crushers with the argument that most of the feed particles are indeed subjected to more than one fragmentation due to the particle–wall and the particle–particle collisions.
2.2. Impact energy per unit mass
Consider the impact between a single particle and a crushing bar attached to the rotor of a hammer crusher. Given that the rotor mass is much greater than the mass of a single particle in the feed, and that before impact the linear velocity of the crushing bar is much more important than the particle velocity, the kinetic energy associated with a single particle is negligible compared with that of the rotor. Considering the conservation of linear momentum of the system particle-crushing bar before and after impact, Attou et al. (1999) derived the following expression for the impact energy per unit mass:
(3)
where R (m) is the rotor radius, Hb (m) is the height of the impact surface of the crushing bars and is the rotor angular velocity.
In vertical-axis crushers, the particles are fed to a horizontal turning table (rotor) with radially oriented guides and are projected towards the crushers walls by the centrifugal forces. Unlike in hammer crushers, here most of the fragmentation takes place at the crusher’s walls rather than at the rotors periphery. With the assumption that the particle energy does not change during its flight from the rotor periphery to the crushing walls, i.e., the particle–particle interactions are neglected in a first approximation, Nikolov and Lucion (2002) derived the following expression for the impact energy per unit mass:
(4)
where Rv (m) and are the rotor radius and angular velocity respectively. The notation Rv is used to distinguish between the impact energy for hammer and vertical-axis crushers given with Eqs. (3) and (4) respectively.
It is interesting to note that for the same rotor radius, the impact energy per unit mass provided by hammer crushers is lower than that provided by verticalaxis crushers. This could explain the fact that verticalaxis crushers produce more fines and perform better when finer granulate must be reduced in size, which is most probably due to the higher level of impact energy reached in these machines.
3. Results
The model developed in the previous section has been implemented in an in-house FORTRAN code. It has been validated with experiments performed on a hammer crusher with rotor diameter and width of 0.65 and0.45 m respectively. The rotor radius is R=0.325m; the height of the rotor’s impact bars is Hb=0.1m The material used is limestone from the region of Tournai, Belgium. The feed has been calibrated by screening and its size ranges from 14 to 20 mm. The maximum particle dimension in the feed is dmax=26mm The reference feed rate Q0 and the reference impact energy E0 are taken to be 2 t/h and 300 J/kg respectively. The rest of the parameters in Eq. (8) are identified as follows: c0=1.4,c1=0.12 and n=0.35. The parameters of the breakage function (Eqs. (11) and (12)) m, l and c2 are set to 0.74, 2.6 and 0.55 respectively. The values of the parameters necessary to compute the shape of the classification function are fixed to k0=1.35 and k1=0.1.
We have performed simulations for two sets of experimental data taken at different feed rates, namely Q=2 and 7t/h. At fixed feed rate, the products obtained with three different rotor velocities (=540; 720; 900 rpm) have been analysed. It is important to note that except for the rotor velocity and the feed rate, all other model parameters have been kept unchanged for all performed simulations.
The experimental and simulated size distributions of the products obtained with different rotor velocities at feed rate of 2 t/h are compared in Fig. 2. The corresponding size distributions obtained at feed rate of 7t/h are depicted in Fig3.
It is seen that the model is able to predict the product size distribution with a reasonable accuracy even when important variations in both the rotor velocity and the feed rate are imposed. At fixed feed rate, higher rotor velocity produces a finer product size distribution. Alternatively, an increase in the feed rate results in a coarser product at fixed rotor velocity. The results also confirm that the product size distribution issued from impact crushing is broader than that obtained with cone or jaw crushers. The influences of the rotor velocity and the feed rate on the minimum size of the particles that undergo breakage dmin are shown in Fig. 4. It is seen that dmin strongly depends on both the rotor velocity and the feed rate and ranges from 3.8 to 7.8 mm for the given operating conditions.
The evolution of the proportion of the fine fraction in the product with rotor velocity and feed rate is shown in Fig. 5. It increases with increasing the rotor velocity and decreases with increasing the feed rate as expected and ranges from 0.35 to 0.59 for the given operating conditions.
For comparison, when the model of Whiten and White (1979) is used for simulation of the behaviour of short-head cone crushers, the values for , m and l are often fixed to 0.2, 0.5 and 2.5 respectively. A greater value for the fine fraction in our case reflects the wellknown fact that the product issued from impact crushing contains more fines than that obtained with cone or jaw crushers.
4. Conclusions
In conclusion, we have developed a performance model for impact crushers that is able to predict the product size distribution at steady-state operating conditions and contains a reasonable number of parameters. The specific behaviour of impact crushers is modelled through classification and breakage functions that both depend on the rotor radius and angular velocity as well as on the feed rate. The introduction of variable minimum size of the breakable particles and proportion of fine fraction in the product seems to be very important for successful modelling of the impact crushing.
The simulation results are in a good agreement with the experiment and show that at higher rotor velocity the product size distribution becomes finer, provided that the feed rate and size are kept unchanged. Alternatively, higher feed rate at constant rotor velocity results in a coarser product.
The model can be easily implemented in the existing commercial codes for mineral processing simulations. It can be used for prediction of the steady-state performance of hammer and/or vertical-axis impact crushers integrated in complex flowsheets. Further work is required to adapt the model for unsteady and transient operating regimes.
Acknowledgements
The Belgian Walloon Region government and the European Community have jointly funded this research as an Objective 1 European project. The author thanks Dr. A. Attou for his contributions at the early stage of the project, Mr. Chr. Lucion for the useful discussions as well as Mr. R. Lemaire for providing the experimental results.
13