飼料自動混合攪拌機設計源文件,飼料,自動,混合,攪拌機,設計,源文件
【摘 要】:本產品主要針對飼料的攪拌而設計。根據產品的主要攪拌對象與其內部結構命名為塊狀物質立式攪拌棒飼料自動混合攪拌機。文章首先介紹了飼料的現狀及一些相關內容,然后說明飼料自動混合攪拌機的發展史以及目前國內現狀和未來的發展方向,并根據產品的性能等要求,說明產品的設計方案由來。在飼料自動混合攪拌機的設計過程中,對主要的部件進行了詳細的設計,并根據飼料自動混合攪拌機的性能確定了V帶、齒輪、電機、軸的具體參數。再根據這些參數繪制出了飼料自動混合攪拌機的裝配圖,同時論文對其他的部件也進行了說明,如:進料口、攪拌棒等。此產品的主要優點在于物料攪拌均勻,能耗低等。詳細信息請參考本文。
【關鍵詞】:塊狀物質 飼料自動混合攪拌機 攪拌棒 結構設計
I
[Abstract]: This product mainly for feed and mixing design. According to the product's main stirring object and its internal structure named clumps of vertical mixing rod mixer. This paper firstly introduces the present situation of feed and some related content, then explains the development history and the current status of the mixer and the future direction of development, and according to the product performance requirements, the design scheme of product origin. In the design process of mixer, the main part of the detailed design, and to determine the specific parameters of the V belt, gear, electric motor, shaft according to the performance of mixer. Then according to the parameter drawing assembly drawing mixer, the other parts are also described, such as: inlet, a stirring bar. The main advantage of this product is uniform mixing of materials, low energy consumption.
[keyword]: rod structure design of bulk material mixer
目 錄
緒論 1
1 設計概述 2
1.1傳動方案的選擇 2
1.1.1 鏈傳動 2
1.1.2齒輪傳動 2
1.1.3 蝸桿傳動 2
1.1.4 帶傳動 2
1.2 飼料自動混合攪拌機類型及特點 3
1.3立式和臥式飼料自動混合攪拌機性能比較 4
1.4飼料自動混合攪拌機的發展方向 5
1.5本次設計思路 7
2飼料自動混合攪拌機的理論與要求 8
2.1非金屬性能 8
2.2飼料自動混合攪拌機的結構設計 8
2.3飼料自動混合攪拌機的工作原理 10
3飼料自動混合攪拌機的設計 11
3.1電機 11
3.2傳動裝置設計 12
3.2.1動力學和運動學計算 12
3.2.2帶傳動設計計算 13
3.2.3齒輪結構與傳動的設計計算 15
3.2.4軸的初步計算 20
3.2.5初選聯軸器和軸承 24
3.3飼料自動混合攪拌機的主體設計 25
3.3.1中心軸及攪拌棒 25
3.3.2筒體 26
3.3.3進料口和出料口 26
3.3.4攪拌棒 27
3.3.5旋轉擋板 27
4 機體的設計 29
4.1對機架結構的基本要求 29
4.2 機架的結構 30
4.3 橫梁設計 32
4.4 機架的基本尺寸的確定 34
4.5 架子材料的選擇確定 34
4.6 主要梁的強度校核 35
總 結 37
參考文獻 38
致 謝 39
1
鏈接地址:http://appdesigncorp.com/article/16299786.html