購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
長春理工大學光電信息學院
畢業設計（論文）題目申報表
院 別 機電工程分院
教 研 室 機電工程教研室
指導教師 吳翠紅 職稱 講師
職稱
年 月 日
題目名稱
機械手設計
題 目
類 別
設計類
√
題目
性質
結合實際
√
專
業
機械電子工程
參加本題目
學生人數
1
論文類
虛擬題目
題目來源、教師準備情況、主要培養學生哪些能力
本課題為機械手設計方面結合實際應用的設計類題目，指導教師為機械電子專業研究生，從事電機控制課題及教學工作，對該課題已經有較成熟的控制技術及理論。
該課題主要培養機械電子工程專業的學生將理論知識充分應用于實際的能力，因為本課題涉及了自動控制原理、計算機控制技術、PLC與可編程控制器、液壓傳動、電機及拖動基礎、機械原理、機械設計等學科，使學生很好的把四年的所學綜合運用及掌握。
題 目 內 容 及 要 求
內容：本設計是基于液壓傳動、機械設計、PLC控制等學科綜合在一起的設計，初步完成了機械手的結構設計和其控制功能，使機械手能與數控車床（數控銑床，加工中心等）組合最終形成生產線，實現加工過程（上料、加工、下料）的自動化、無人化，從而減輕工人勞動強度，節約加工輔助時間，提高生產效率和生產力。
要求： 1.完成資料翻譯一份（3000字以上）
2.完成畢業設計調研報告一份；
3.完成生產線上運輸升降機的自動化設計；
4.完成相關程序設計；
5.完成畢業設計說明書一份；
6.完成相關圖紙。
實
踐
環
節
安
排
實習
吉林衫盛模塑科技有限公司實習（5個月）
實驗
基于PLC的控制實驗
計算機應用
CAD制圖72機時；
中、外文參考資料：
[4]李建勇. 機電一體化技術[M]. 北京:科學出版社,2004.
[5]王孫安,杜海峰,任華. 機械電子工程[M]. 北京:科學出版社,2003.
[2]徐灝等. 機械設計手冊[M]. 北京:機械工業出版社,2000.
[7]陳紹華. 機械設備電器控制[M]. 華南理工大學出版社,2000.
[4]李建勇. 機電一體化技術[M]. 北京:科學出版社,2004.
[5]王孫安,杜海峰,任華. 機械電子工程[M]. 北京:科學出版社,2003.
[6]吳廣玉,姜復興. 機器人工程導論[M]. 哈爾濱:哈爾濱工業大學出版社,1988.
[1]王憲軍,趙存友. 液壓傳動[M]. 哈爾濱:哈爾濱工程大學出版社,2002.
[7]陳鐵鳴,王連明,王黎欽. 機械設計(修訂版)[M]. 哈爾濱:哈爾濱工業大學出版社,2003.
[8]丁又青,朱新才. 一種新型型鋼翻面機液壓系統設計[J]. 中國科學院上海冶金研究所,2003,(5):128-129.
教研室主任
審批簽字
分 院 院 長
審批簽字
注：題目類別和題目性質請用符號√填在相應欄內。
長春理工大學光電信息學院畢業設計（論文）登記表
分院
機電工程分院
專業
機械電子工程
班級
09522
學生姓名?
趙天舒
指導教師
吳翠紅
設計（論文）起止日期
2013年3月2—6月21
教研室主任
題目名稱（包括主要技術參數）及要求
1.題目：機械手設計
2.要求：1）設計合理的液壓傳動系統，以及PLC控制程序，能合理地控制機械手上下料。
2）機械手的整體結構設計，以及總裝圖、液壓系統圖、PLC接線圖及具體零件圖的繪制。
論文開題報告（設計方案論證）
應該包括以下幾方面內容：
1、本課題研究的意義；2、調研（社會調查）情況總結；3、查閱文獻資料情況（列出主要文獻清單)；4、擬采取的研究路線；5、進度安排。
1.本課題研究的意義：
目前，在國內很多工廠的生產線上數控機床裝卸工件仍由人工完成，勞動強度大、生產效率低。為了提高生產加工的工作效率,降低成本,并使生產線發展成為柔性制造系統,適應現代自動化大生產,針對具體生產工藝,利用機器人技術，設計用一臺裝卸機械手代替人工工作，以提高勞動生產率。
2.社會情況總結：
在指導教師的帶領指導下，我們參閱了大量文獻，并對機械手設計的有關工廠進行了參觀了解，使我們的設計思路得到了很大啟發，并對我們設計過程當中出現的問題如何正確的解決有了一定的幫助。
3.參考文獻：
[1]王憲軍, 趙存友. 液壓傳動[M]. 哈爾濱: 哈爾濱工程大學出版社,2002.
[2]徐灝等. 機械設計手冊[M]. 北京: 機械工業出版社,2000.
[3]陳紹華. 機械設備電器控制[M]. 華南理工大學出版社,2000.
[4]李建勇. 機電一體化技術[M]. 北京：科學出版社,2004.
[5]王孫安, 杜海峰, 任華. 機械電子工程[M]. 北京: 科學出版社,2003.
[6]吳廣玉，姜復興. 機器人工程導論[M]. 哈爾濱：哈爾濱工業大學出版社,1988.
[7]陳鐵鳴, 王連明, 王黎欽. 機械設計(修訂版)[M] 哈爾濱:哈爾濱工業大學出版社,2003.
[8]丁又青, 朱新才. 一種新型型鋼翻面機液壓系統設計[J]. 中國科學院上海冶金研究所,2003, (5): 128-129.
[9]劉劍雄,韓建華. 物流自動化搬運機械手機電系統研究[J]. 機械與液 2003, (1): 126-128.
[10]孫兵,趙斌, 施永康. 基于PLC的機械手混合驅動控制[J]. 液壓與氣動2005, (3): 37-39.
[11]張啟玲, 何玉安. PLC在氣動控制稱量包裝裝置中的應用[J]. 中文科技期刊數據庫,2005,(1).
[12]潘沛霖, 楊宏, 吳偉光. 四自由度折疊式機械手的結構設計與分析[J]. 哈爾濱工業大學學報,1994,26(4): 90-95.
4.擬采取的研究路線：
指導老師下達任務→充分理解課題要解決的問題→查閱文件和素材（圖書館、上網）→翻譯英文資料（達新校區主樓教室）→撰寫論文（達新校區主樓教室）→CAD繪圖→指導教師審查→修改、完善、定稿→準備答辯
5.進度安排：
3月2日—3月15日 查閱文件，書籍材料。
3月16日—3月29日 翻譯英文材料。
3月30日—4月26日 寫課題論文，寫初稿。
4月27日—5月17日 完善論文，定稿。
5月18日—6月7日 繪制設計草圖、打印。
6月8日—6月21日 整理，熟悉文件。
2
指導教師審閱意見：
2012.年 3 月 1 日
記事:
指導教師審閱意見：
2012年 6 月 10 日
中文：
機械手
機械手是近幾十年發展起來的一種高科技自動化生產設備。工業機械手是工業機器人的一個重要分支。它的特點是可通過編程來完成各種預期的作業任務，在構造和性能上兼有人和機器各自的優點，尤其體現了人的智能和適應性。機械手作業的準確性和各種環境中完成作業的能力，在國民經濟各領域有著廣闊的發展前景。隨著工業自動化的發展, 出現了數控加工中心,它在減輕工人的勞動強度的同時, 大大提高了勞動生產率。但數控加工中常見的上下料工序, 通常仍采用人工操作或傳統繼電器控制的半自動化裝置。前者費時費工、效率低; 后者因設計復雜, 需較多繼電器,接線繁雜, 易受車體振動干擾,而存在可靠性差、故障多、維修困難等問題?？删幊绦蚩刂破鱌LC控制的上下料機械手控制系統動作簡便、線路設計合理、具有較強的抗干擾能力, 保證了系統運行的可靠性,降低了維修率, 提高了工作效率。機械手技術涉及到力學、機械學、電氣液壓技術、自動控制技術、傳感器技術和計算機技術等科學領域，是一門跨學科綜合技術。
一、 工業機械手的概述
機械手是一種能自動化定位控制并可重新編程序以變動的多功能機器，它有多個自由度，可用來搬運物體以完成在各個不同環境中工作。在工資水平較低的中國，塑料制品行業盡管仍屬于勞動力密集型，機械手的使用已經越來越普及。那些電子和汽車業的歐美跨國公司很早就在它們設在中國的工廠中引進了自動化生產。但現在的變化是那些分布在工業密集的華南、華東沿海地區的中國本土塑料加工廠也開始對機械手表現出越來越濃厚的興趣，因為他們要面對工人流失率高，以及為工人交工傷費帶來的挑戰。
隨著我國工業生產的飛躍發展，特別是改革開發以后，自動化程度的迅速提高，實現工件的裝卸、轉向、輸送或操作釬焊、噴槍、扳手等工具進行加工、裝配等作業自化，已愈來愈引起我們重視。
機械手是模仿著人手的部分動作，按給定的程序、軌跡和要求實現自動抓取、搬運或操作的自動機械裝置。
在現實生活中，你是否會發現這樣一個問題。在機械工廠里，加工零件裝料的時候是不是很煩的，勞動生產率不高，生產成本大，有時候還會發生一些人為事故，導致加工者受傷。想想看用什么可以來代替呢，加工的時候只要有幾個人巡視一下，且可以二十四個小時飽和運作，人行嗎？回答是肯定的，但是機械手可以來代替它。
生產中應用機械手可以提高生產的自動化水平和勞動生產率;可以減輕勞動強度、保證產品質量、實現安全生產；尤其是在高溫、高壓、低溫、低壓、粉塵、易爆、有毒氣體和放射性等惡劣的環境中能夠代替人進行正常的工作。想到這里我就很想設計一個機械手，來用于生產實際中。
二﹑機械手的組成
機械手的形式是多種多樣的，有的較為簡單，有的較為復雜，但基本的組成形式是相同的，一般由執行機構、傳動系統、控制系統和輔助裝置組成。
1. 執行機構
機械手的執行機構，由手、手腕、手臂、支柱組成。手是抓取機構，用來夾緊和松開工件，與人的手指相仿，能完成人手的類似動作。手腕是連接手指與手臂的元件，可以進行上下、左右和回轉動作。簡單的機械手可以沒有手腕。支柱用來支撐手臂，也可以根據需要做成移動。
2. 傳動系統
執行機構的動作要由傳動系統來實現。常用機械手傳動系統分機械傳動、液壓傳動、氣壓傳動和電力傳動等幾種形式。
3. 控制系統
機械手控制系統的主要作用是控制機械手按一定的程序、方向、位置、速度進行動作，簡單的機械手一般不設置專用的控制系統，只采用行程開關、繼電器、控制閥及電路便可實現動傳動系統的控制，使執行機構按要求進行動作．動作復雜的機械手則要采用可編程控制器、微型計算機進行控制。
三﹑ 機械手的分類和特點
機械手一般分為三類：第一類是不需要人工操作的通用機械手。它是一種獨立的不附屬于某一主機的裝置。它可以根據任務的需要編制程序，以完成各項規定的操作。它的特點是具備普通機械的性能之外，還具備通用機械、記憶智能的三元機械。第二類是需要人工才做的，稱為操作機。它起源于原子、軍事工業，先是通過操作機來完成特定的作業，后來發展到用無線電訊號操作機來進行探測月球等。工業中采用的鍛造操作機也屬于這一范疇。第三類是用專用機械手，主要附屬于自動機床或自動線上，用以解決機床上下料和工件送。這種機械手在國外稱為“Mechanical Hand”，它是為主機服務的，由主機驅動；除少數以外，工作程序一般是固定的，因此是專用的。
主要特點：
(1) 機械手（上下料機械手、裝配機械手、搬運機械手、堆垛機械手、助力機械手、真空搬運機、 真空吸吊機、省力吊具、氣動平衡器等）。
(2) 懸臂起重機（懸臂吊、電動環鏈葫蘆吊、氣動平衡吊等）
(3) 導軌式搬運系統（懸掛軌道、輕型軌道、單梁起重機、雙梁起重機）
(4) 工業機械手的應用
機械手是在機械化、自動化生產過程中發展起來的一種新型裝置。近年來，隨著電子技術特別是電子計算機的廣泛應用，機器人的研制和生產已成為高技術領域內迅速發展起來的一門新興技術，它更加促進了機械手的發展，使得機械手能更好地實現與機械化和自動化的有機結合。
機械手雖然目前還不如人手那樣靈活，但它具有能不斷重復工作和勞動、不知疲勞、不怕危險、抓舉重物的力量比人手大等特點，因此，機械手已受到許多部門的重視，并越來越廣泛地得到了應用，例如：
(1) 機床加工工件的裝卸，特別是在自動化車床、組合機床上使用較為普遍。
(2) 在裝配作業中應用廣泛，在電子行業中它可以用來裝配印制電路板，在機械行業中它可以用來組裝零部件。
(3) 可在勞動條件差，單調重復易子疲勞的工作環境工作，以代替人的勞動。
(4) 可在危險場合下工作，如軍工品的裝卸、危險品及有害物的搬運等。
(5) 宇宙及海洋的開發。
(6) 軍事工程及生物醫學方面的研究和試驗。
助力機械手:又稱平衡器、平衡吊、省力吊具、手動移載機等，是一種無重力化手動承載系統，一種新穎的、用于物料搬運時省力化操作的助力設備,屬于一種非標設計的系列化產品。針對客戶應用需求，量身定制的個案創作。
一種模擬人手操作的自動機械，它可按固定程序抓取﹑搬運物件或操持工具完成某些特定操作。應用機械手可以代替人從事單調﹑重復或繁重的體力勞動，實現生產的機械化和自動化，代替人在有害環境下的手工操作，改善勞動條件，保證人身安全。20世紀40年代后期，美國在原子能實驗中，首先采用機械手搬運放射性材料，人在安全室操縱機械手進行各種操作和實驗。50年代以后，機械手逐步推廣到工業生產部門，用于在高溫﹑污染嚴重的地方取放工件和裝卸材料，也作為機床的輔助裝置在自動機床﹑自動生產線和加工中心中應用，完成上下料或從刀庫中取放刀具并按固定程序更換刀具等操作。機械手主要由手部機構和運動機構組成。手部機構隨使用場合和操作對象而不同，常見的有夾持﹑托持和吸附等類型。運動機構一般由液壓﹑氣動﹑電氣裝置驅動。機械手可獨立地實現伸縮﹑旋轉和昇降等運動，一般有2～3個自由度。機械手廣泛用于機械製造﹑冶金﹑輕工和原子能等部門。
能模仿人手和臂的某些動作功能，用以按固定程序抓取、搬運物件或操作工具的自動操作裝置。它可代替人的繁重勞動以實現生產的機械化和自動化，能在有害環境下操作以保護人身安全，因而廣泛應用于機械制造、冶金、電子、輕工和原子能等部門。 機械手通常用作機床或其他機器的附加裝置，如在自動機床或自動生產線上裝卸和傳遞工件，在加工中心中更換刀具等，一般沒有獨立的控制裝置。有些操作裝置需要由人直接操縱，如用于原子能部門操持危險物品的主從式操作手也常稱為機械手。
機械手主要由手部和運動機構組成。手部是用來抓持工件（或工具）的部件，根據被抓持物件的形狀、尺寸、重量、材料和作業要求而有多種結構形式，如夾持型、托持型和吸附型等。運動機構，使手部完成各種轉動（擺動）、移動或復合運動來實現規定的動作，改變被抓持物件的位置和姿勢......
機械手是在自動化生產過程中使用的一種具有抓取和移動工件功能的自動化裝置，它是在機械化、自動化生產過程中發展起來的一種新型裝置。近年來，隨著電子技術特別是電子計算機的廣泛應用，機器人的研制和生產已成為高技術領域內迅速發展起來的一門新興技術，它更加促進了機械手的發展，使得機械手能更好地實現與機械化和自動化的有機結合。機械手能代替人類完成危險、重復枯燥的工作，減輕人類勞動強度，提高勞動生產力。機械手越來越廣泛的得到了應用，在機械行業中它可用于零部件組裝 ，加工工件的搬運、裝卸，特別是在自動化數控機床、組合機床上使用更普遍。目前，機械手已發展成為柔性制造系統FMS和柔性制造單元FMC中一個重要組成部分。把機床設備和機械手共同構成一個柔性加工系統或柔性制造單元，它適應于中、小批量生產，可以節省龐大的工件輸送裝置，結構緊湊，而且適應性很強。當工件變更時，柔性生產系統很容易改變，有利于企業不斷更新適銷對路的品種，提高產品質量，更好地適應市場競爭的需要。而目前我國的工業機器人技術及其工程應用的水平和國外比還有一定的距離，應用規模和產業化水平低，機械手的研究和開發直接影響到我國自動化生產水平的提高，從經濟上、技術上考慮都是十分必要的。因此，進行機械手的研究設計是非常有意義的。
Manipulator
Robot developed in recent decades as high-tech automated production equipment. Industrial robot is an important branch of industrial robots. It features can be programmed to perform tasks in a variety of expectations, in both structure and performance advantages of their own people and machines, in particular, reflects the people's intelligence and adaptability. The accuracy of robot operations and a variety of environments the ability to complete the work in the field of national economy and there are broad prospects for development. With the development of industrial automation, there has been CNC machining center, it is in reducing labor intensity, while greatly improved labor productivity. However, the upper and lower common in CNC machining processes material, usually still use manual or traditional relay-controlled semi-automatic device. The former time-consuming and labor intensive, inefficient; the latter due to design complexity, require more relays, wiring complexity, vulnerability to body vibration interference, while the existence of poor reliability, fault more maintenance problems and other issues. Programmable Logic Controller PLC-controlled robot control system for materials up and down movement is simple, circuit design is reasonable, with a strong anti-jamming capability, ensuring the system's reliability, reduced maintenance rate, and improve work efficiency. Robot technology related to mechanics, mechanics, electrical hydraulic technology, automatic control technology, sensor technology and computer technology and other fields of science, is a cross-disciplinary integrated technology.
First, an overview of industrial manipulator
Robot is a kind of positioning control can be automated and can be re-programmed to change in multi-functional machine, which has multiple degrees of freedom can be used to carry an object in order to complete the work in different environments. Low wages in China, plastic products industry, although still a labor-intensive, mechanical hand use has become increasingly popular. Electronics and automotive industries that Europe and the United States multinational companies very early in their factories in China, the introduction of automated production. But now the changes are those found in industrial-intensive South China, East China's coastal areas, local plastic processing plants have also emerged in mechanical watches began to become increasingly interested in, because they have to face a high turnover rate of workers, as well as for the workers to pay work-related injuries fee challenges.
With the rapid development of China's industrial production, especially the reform and opening up after the rapid increase in the degree of automation to achieve the workpiece handling, steering, transmission or operation of brazing, spray gun, wrenches and other tools for processing and assembly operations since, which has more and more attracted our attention.
Robot is to imitate the manual part of the action, according to a given program, track and requirements for automatic capture, handling or operation of the automatic mechanical devices.
In real life, you will find this a problem. In the machine shop, the processing of parts loading time is not annoying, and labor productivity is not high, the cost of production major, and sometimes man-made incidents will occur, resulting in processing were injured. Think about what could replace it with the processing time of a tour as long as there are a few people, and can operate 24 hours saturated human right? The answer is yes, but the robot can come to replace it.
Production of mechanical hand can increase the automation level of production and labor productivity; can reduce labor intensity, ensuring product quality, to achieve safe production; particularly in the high-temperature, high pressure, low temperature, low pressure, dust, explosive, toxic and radioactive gases such as poor environment can replace the normal working people. Here I would like to think of designing a robot to be used in actual production.
Second, the composition, mechanical hand
Robot in the form of a variety of forms, some relatively simple, some more complicated, but the basic form is the same as the composition of the
, Usually by the implementing agencies, transmission systems, control systems and auxiliary devices composed.
1. Implementing agencies
Manipulator executing agency by the hands, wrists, arms, pillars. Hands are crawling institutions, is used to clamp and release the workpiece, and similar to human fingers, to complete the staffing of similar actions. Wrist and fingers and the arm connecting the components can be up and down, left, and rotary movement. A simple mechanical hand can not wrist. Pillars used to support the arm can also be made mobile as needed.
2. Transmission
The actuator to be achieved by the transmission system. Sub-transmission system commonly used manipulator mechanical transmission, hydraulic transmission, pneumatic and electric power transmission and other drive several forms.
3. Control System
Manipulator control system's main role is to control the robot according to certain procedures, direction, position, speed of action, a simple mechanical hand is generally not set up a dedicated control system, using only trip switches, relays, control valves and circuits can be achieved dynamic drive system control, so that implementing agencies according to the requirements of action. Action will have to use complex programmable robot controller, the micro-computer control.
Three, mechanical hand classification and characteristics
Robots are generally divided into three categories: the first is the general machinery does not require manual hand. It is an independent not affiliated with a particular host device. It can be programmed according to the needs of the task to complete the operation of the provisions. It is characterized with ordinary mechanical performance, also has general machinery, memory, intelligence ternary machinery. The second category is the need to manually do it, called the operation of aircraft. It originated in the atom, military industry, first through the operation of machines to complete a particular job, and later developed to operate using radio signals to carry out detecting machines such as the Moon. Used in industrial manipulator also fall into this category. The third category is dedicated manipulator, the main subsidiary of the automatic machines or automatic lines, to solve the machine up and down the workpiece material and delivery. This mechanical hand in foreign countries known as the "Mechanical Hand", which is the host of services, from the host-driven; exception of a few outside the working procedures are generally fixed, and therefore special.
Main features:
First, mechanical hand (the upper and lower material robot, assembly robot, handling robot, stacking robot, help robot, vacuum handling machines, vacuum suction crane, labor-saving spreader, pneumatic balancer, etc.).
Second, cantilever cranes (cantilever crane, electric chain hoist crane, air balance the hanging, etc.)
Third, rail-type transport system (hanging rail, light rail, single girder cranes, double-beam crane)
Four, industrial machinery, application of hand
Manipulator in the mechanization and automation of the production process developed a new type of device. In recent years, as electronic technology, especially computer extensive use of robot development and production of high-tech fields has become a rapidly developed a new technology, which further promoted the development of robot, allowing robot to better achieved with the combination of mechanization and automation.
Although the robot is not as flexible as staff, but it has to the continuous duplication of work and labor, I do not know fatigue, not afraid of danger, the power snatch weight characteristics when compared with manual large, therefore, mechanical hand has been of great importance to many sectors, and increasingly has been applied widely, for example:
(1) Machining the workpiece loading and unloading, especially in the automatic lathe, combination machine tool use is more common.
(2) In the assembly operations are widely used in the electronics industry, it can be used to assemble printed circuit boards, in the machinery industry
It can be used to assemble parts and components.
(3) The working conditions may be poor, monotonous, repetitive easy to sub-fatigue working environment to replace human labor.
(4) May be in dangerous situations, such as military goods handling, dangerous goods and hazardous materials removal and so on.
(5) Universe and ocean development.
(6), military engineering and biomedical research and testing.
Help mechanical hands: also known as the balancer, balance suspended, labor-saving spreader, manual Transfer machine is a kind of weightlessness of manual load system, a novel, time-saving technology for material handling operations booster equipment, belonging to kinds of non-standard design of series products. Customer application needs, creating customized cases.
Manual operation of a simulation of the automatic machinery, it can be a fixed program draws ﹑ handling objects or perform household tools to accomplish certain specific actions. Application of robot can replace the people engaged in monotonous ﹑ repetitive or heavy manual labor, the mechanization and automation of production, instead of people in hazardous environments manual operation, improving working conditions and ensure personal safety. The late 20th century, 40, the United States atomic energy experiments, the first use of radioactive material handling robot, human robot in a safe room to manipulate various operations and experimentation. 50 years later, manipulator and gradually extended to industrial production sector, for the temperatures, polluted areas, and loading and unloading to take place the work piece material, but also as an auxiliary device in automatic machine tools, machine tools, automatic production lines and processing center applications, the completion of the upper and lower material, or From the library take place knife knife and so on according to fixed procedures for the replacement operation. Robot body mainly by the hand and sports institutions. Agencies with the use of hands and operation of objects of different occasions, often there are clamping ﹑support and adsorption type of care. Movement organs are generally hydraulic pneumatic 、electrical device drivers. Manipulator can be achieved independently retractable ﹑rotation and lifting movements, generally 2 to 3 degrees of freedom. Robots are widely used in metallurgical industry, machinery manufacture, light industry and atomic energy sectors.
Can mimic some of the staff and arm motor function, a fixed procedure for the capture, handling objects or operating tools, automatic operation device. It can replace human labor in order to achieve the production of heavy mechanization and automation that can operate in hazardous environments to protect the personal safety, which is widely used in machinery manufacturing, metallurgy, electronics, light industry and nuclear power sectors. Mechanical hand tools or other equipment commonly used for additional devices, such as the automatic machines or automatic production line handling and transmission of the workpiece, the replacement of cutting tools in machining centers, etc. generally do not have a separate control device. Some operating devices require direct manipulation by humans; such as the atomic energy sector performs household hazardous materials used in the master-slave manipulator is also often referred to as mechanical hand.
Manipulator mainly by hand and sports institutions. Task of hand is holding the workpiece (or tool) components, according to grasping objects by shape, size, weight, material and operational requirements of a variety of structural forms, such as clamp type, type and adsorption-based care such as holding. Sports organizations, so that the completion of a variety of hand rotation (swing), mobile or compound movements to achieve the required action, to change the location of objects by grasping and posture.
Robot is the automated production of a kind used in the process of crawling and moving piece features automatic device, which is mechanized and automated production process developed a new type of device. In recent years, as electronic technology, especially computer extensive use of robot development and production of high-tech fields has become a rapidly developed a new technology, which further promoted the development of robot, allowing robot to better achieved with the combination of mechanization and automation. Robot can replace humans completed the risk of duplication of boring work, to reduce human labor intensity and improve labor productivity. Manipulator has been applied more and more widely, in the machinery industry, it can be used for parts assembly, work piece handling, loading and unloading, particularly in the automation of CNC machine tools, modular machine tools more commonly used. At present, the robot has developed into a FMS flexible manufacturing systems and flexible manufacturing cell in an important component of the FMC. The machine tool equipment and machinery in hand together constitute a flexible manufacturing system or a flexible manufacturing cell, it was adapted to small and medium volume production, you can save a huge amount of the work piece conveyor device, compact, and adaptable. When the work piece changes, flexible production system is very easy to change will help enterprises to continuously update the marketable variety, improve product quality, and better adapt to market competition. At present, China's industrial robot technology and its engineering application level and comparable to foreign countries there is a certain distance, application and industrialization of the size of the low level of robot research and development of a direct impact on raising the level of automation in China, from the economy, technical considerations are very necessary. Therefore, the study of mechanical hand design is very meaningful.